How to Connect Two Routers on the Same Telephone Network Easy!

Since its appearance the internet has become an essential tool for economic and social development in the world. We can even say that it has contributed to the rapid growth and evolution of many communities.

This technology improves every day and it is necessary to keep up to date with the latest advances in this area. To take full advantage of it and make the experience on the web an enriching moment, we can resort to a good number of options. One of them is increase and improve our Internet connection

Expanding the signal, achieving stability and speed, are the great challenges that we must overcome. In this post we are going to show you how to connect two routers on the same Internet line to improve reception quality and speed.

How to connect 2 routers to the same network

The necessary elements for this connection are, in addition to the two routers, an Ethernet cable, which should generally come when we purchase the equipment. The next step is connect them in series inserting the end of the Ethernet cable into the LAN 1 port of the main router that receives the Internet signal.

The other end of the Ethernet cable must also be connected to the LAN 1 port of the secondary router. This will serve as a link to expand the signal or expand the connection possibilities as the case may be. The next step is configure the two routers.

Can you have 2 routers on the same LAN network?

Being able to connect two routers to the same LAN has benefits that translate into a higher data transmission speed. Of course, one of them is used as a signal amplifier and the other as a receiver of the wireless signal. In addition, a specific recommendation that is worth following is to configure the access points in such a way that the connection is fluid.

If we are going to use other routers to share the network signal with other users, by changing the name and password, then the transmission speed may decrease due to traffic or usage. In other words, we would be using the same signal to transmit to two different routers, thus reducing efficiency.

We can connect two routers on the same LAN to exchange files between devices that are connected to it. The most important step in this connection It is the configuration of the routers, which we describe below.

How to configure two routers on the same telephone network

To configure the main router you must connect it to both the modem and the computer through an Ethernet cable. Enter the router setup page using your IP address in the browser’s search engine.

If the network that we are going to create is of the LAN to LAN type, we should not make any changes. If the network is from LAN to WAN type we must configure DHCP service in such a way that it supplies addresses in a range between 192.168.1.1 and 192.168.1.50. Once this is done, we disconnect the main router and connect the second or secondary router.

Once in the configuration page of the same, we match your IP address with that of the main router increasing the penultimate number by one unit. This is if the connection we are looking for is from LAN to LAN mode.

If the connection is of the LAN to WAN type, we change its WAN IP address by increasing the last digit by one, that is, 192.168.1.51. Once this is done it is recommended to restart both routers for the changes to take place correctly.

What are the benefits of having two routers on the same network line?

One of the most outstanding benefits of having two routers on the same network line is to increase the signal range. This can allow us have access to the Internet in other areas of the residence. In addition to this, it would also increase the speed of browsing and downloading files from the web.

Will my internet be faster if I connect 2 routers to the same line?

This is one of the objectives of connecting 2 routers in series on the same line. This is possible if the router secondary we use it as an amplifier signal and not as a second Wi-Fi network to distribute the internet to other users.