How to Convert Speakers to Bluetooth

October 29, 2020, by Santiago Comment

Currently on the cell phone we have all kinds of multimedia content, music, videos, podcasts, audiobooks, etc. However, the volume of the mobile is very low and of poor quality. Normally, to amplify the audio of our phone we must connect it to a speaker, speaker or even radio recorder or stereo equipment. The ideal would be to have a computer so that it has Bluetooth technology to “pair” it with our cell phone. Unfortunately, many of these audio equipment, especially the older ones, do not have Bluetooth and cannot connect to the cell phone in this way.

Put Bluetooth to a speaker with this adapter

To put Bluetooth on speakers or stereo without this technology you need a 3.5mm to Bluetooth adapter, like the one shown in the image above. There are several such adapters on the market. The one with the brand Taotronics has good features, although I also recommend the MPOW, available in Amazon for 15 dollars.

This appliance has buttons to control playback, so that you do not depend on the cell phone. It can pause or play, raise or lower the volume Y switch tracks. It even has microphone, so you can take advantage of it as free hands. So you can talk on the phone, without having to put your cell phone to your ear.

Comes with a built-in rechargeable battery. You can charge the adapter with its USB cable while you are using it. According to the manufacturer, it takes an hour and a half to load. 1.5. It usually lasts about 10 hours in playback and 120 hours in standby mode.

Offers a good range Y good audio quality thanks to Bluetooth 5.0 technology. It is also capable of allowing pair with two devices at the same time.

How to convert your speakers to Bluetooth

You simply have to place the 3.5mm “bridge” (silver color) on this adapter and insert it into the 3.5mm input of your speakers, loudspeaker or stereo, as shown below.

How to put Bluetooth to a stereo without this technology.

The Bluetooth adapter must be inserted into the hole marked “Audio IN” on the speaker or mini-component.

If your speakers do not have the “Audio IN” audio input, for example they are PC or computer speakers or even headphones that do not have Bluetooth, you must remove the silver jumper indicated above and insert the speaker cable directly into the adapter, as seen below.

Computer speakers can also be converted to Bluetooth with this adapter.

Conclution

Thanks to this adapter you can put Bluetooth in practically any speaker, headphone or even stereo without this technology, as long as you use a 3.5mm connection. If the speaker or equipment uses a component audio connection (white and red connectors), then you will need an additional component adapter to 3.5mm.

How to find out how much battery a Bluetooth device has

How to connect your mobile with the car or other devices AUTOMATICALLY by Bluetooth

How to block the WiFi, Bluetooth and other settings on the cell phone