How to increase GTX 1060 3gb Mining: Overclocking |Dual mining ETH & DCR

How to ‘increase/ Max / Optimized’ GTX 1060 3gb Mining: Overclocking |Dual mining ETH & DCR – Among all the graphics cards that are popular for mining farms, NVidia’s GeForce GTX 1060 is considered one of the best. The combination of low power consumption, good power and reasonable price made the graphics card the # 1 choice for farms. Nevertheless, such great popularity had its consequences, as a result of which the cost of video cards increased significantly.

How to increase GTX 1060 3gb Mining

Is the GTX 1060 the best choice for mining in 2018? Let’s take a look at specific examples and calculations.

GTX 1060 chip: Graphics card parameters

The GTX 1060 chip is manufactured using a 16nm process that provides a quantum leap over the 9xx series with 28nm technology. Video cards based on it are produced by several manufacturers and are equipped with memory chips with a total capacity of 3 GB and 6 GB .

The main parameters of the GTX 1060 are as follows:

• video memory type – GDDR5 (3/6 GB);
• chip architecture – Pascal;
• memory bus frequency – 2 GHz;
• RAM bandwidth – 8Gb / s;
• memory bus width – 192 bits;
• core frequency – 1506/1708 MHz (base / boost);
• the number of rasterization blocks – 48;
• the number of processors in the chip – 1280;
• additional power connector – 6 pin;
• power – 120 watts.

The video cards have an efficient cooling system and can operate stably at chip temperatures up to 94 degrees. However, such heating should not be allowed during mining. In practice, failures during Zcash mining appear after 70 degrees.

If possible, buy a GPU version with 6 gigabytes of RAM. The DAG file of the ether will no longer fit into 3 gigabytes in 2021. In this case, there will be only the possibility of extracting Zcash, which is less demanding on the size of video memory.

ASUS is releasing GPU versions with increased RAM bandwidth up to 9 Gb / s. They are most efficient for mining Ethereum.

GTX 1070 mining profitability

The same procedure was followed with other video cards. For GTX 1070, 2CryptoCalc suggested mining Aeternity – that day the cryptocurrency brought in $ 1.50 and was in first place in terms of profitability.

The rate on the day of the start of the experiment was $ 0.4701 for one Aeternity coin.

Then we went to fix the projected income. For the week, the calculator promised 21.2571 AE or $ 10 of profitability.

Finally, we started mining at 2Miners for a week. A summary of how your computer works with the GTX 1070 can be found on this page.

In seven days, the video card earned 16.74683 AE or $ 7.68. This is 22 percent below the predicted profit, and the reason is also the difficulty of mining. The indicator increased from 906.9 K to 1.49 M, that is, it jumped 1.65 times. In addition, the rate dropped – from 0.4701 to 0.4590 dollars. It is not surprising that the yield differs from the forecast.

We deal with electricity. A system unit with a GTX 1070 consumes 270 watts per hour, that is, 45.36 kW per week of experiment. For light, you will have to pay 181.44 rubles or 2.86 dollars.

Total: we have 4.82 dollars of net profit for the week of mining Aeternity (7.68-2.86). So the GTX 1070 will make $ 231 a year. And if the rate rises or the difficulty falls, it will be even more.

Performance on stock settings

The efficiency of using Nvidia GTX 1060 in mining depends on two parameters: power consumption and performance.

The hashrate and power consumption of an advanced version of a video card with memory from Samsung with standard frequency settings looks like this:

• Ethereum – 23.5 MH / s, 75 W;
• Ethereum + Decret (or Siacoin) – 22.7 MH / s + 227.5 MH / s, 95 W;
• Zcash – 295 Sol / s, 130 W.

With the current situation in the cryptocurrency market, the hash rate is not relevant when working with other algorithms. The decline in prices has increased the payback period even when mining top currencies, so experimenting with low-profit coins does not make sense.

Profitability 1060/1070/1080 when mining Ethereum / ZCASH

The profitability of video cards in Ethereum mining is calculated taking into account the costs incurred and the payback period. The data below is not accurate due to price differences – the current price of video cards may differ from the one presented.

As a result, the price-performance ratio looks like this:

This ratio shows that the GTX 1050 and 1050 Ti graphics cards offer greater value. However, taking into account the power produced in cryptocurrency mining, video cards show the following payback:

• GTX 1050 – 127 days , $ 9 daily income;
• GTX 1050 Ti – 90 days , $ 14.5;
• GTX 1060 – 95, 21$;
• GTX 1070 – 88, 34$;
• GTX 1080 – 100, 36$;
• GTX 1080 Ti – 90 , $ 52.

These figures are given taking into account the assembly of a farm in 6 video cards. The purchase and configuration of additional equipment was taken into account. The indicators may differ from the current ones due to the difference in the price and efficiency of cryptocurrency mining, which tends to decrease. The given value of income after the return of the initial investment becomes a net daily profit.

The general ratio of video cards is determined in the following order: the most promising for mining are the GTX 1070 and 1080 Ti models . 1080 does not differ in good performance, if funds are available, it is better to take a subsequent model or buy an additional 1070.1060 is a budget option used for mining with a shortage of other video cards or limited initial funds.

What can be mined at 1060

You can use the power of the video card to mine any cryptocurrency. However, one should not forget about the profitability of crypto mining. Using the GTX 1060 for mining Bitcoin and other currencies, the mining algorithm of which is not picky about the memory size, is ineffective. In this case, the performance and energy efficiency of hundreds of ASIC processors combined in a single chip is incomparably higher than the analogous parameters of any GPU. With a graphics card, you won’t even be able to make money on electricity, let alone a return on your farm investment.

The greatest profit on GTX 1060 comes from mining Ethereum (ETH) and Zcash (ZEC). You can try to get additional income by running Ethereum dual mining with Siacoin or Decret . The second currency can also be LBRY . At the same time, the speed of mining for the main currency decreases slightly.

The profitability of mining is constantly changing along with the exchange rates. You can use an online calculator to find the optimal currency pair or coin for solo mining. The most famous of them – Whattomine.com – allows you to calculate income, profit and ROI for any device in all current currencies.

Mining Performance ZEC

The ZEC algorithm is not very picky about the size of the video memory. Therefore, cheaper versions of the cards can be purchased for this currency. Mining on six GTX 1060s with 3Gb at 290 Sol / s generates about $ 18.5 per day. And this is the case when you can not overpay. If you buy a 1060 6Gb card, Zcash mining will bring no more than 1% additional income $ 5.4 per month will not be able to compensate for the difference in cost.

Ether mining

If you are going to invest in a GTX 1060 ETH farm, it is best not to buy a low-end GPU. A slightly smaller number of CUDA cores (1152 versus 1280) has little effect on speed. However, the Ether DUG file has already approached the 3Gb mark, so using the GTX 1060 3Gb for mining ETH will soon become impossible. Taking into account the subsidence of prices for cryptocurrencies, the video card simply will not have time to pay off before it loses its relevance.

In general, the GTX 1060 chip performs better in ether mining than when working with Zcash.

Hashrate on basic settings, their six video cards provide a profitability of $ 20.5 per day.

It is worth noting that, despite the efforts made by the manufacturer, in terms of price / hash rate, Nvidia GTX 1060 cards remained lagging behind AMD.

Dual mining ETH and SC

To mine two currencies at the same time, you should use the Claymore’s DualMiner app . It allows you to use Geforce GTX 1060 for mining Ethereum and its forks together with Siacoin, Decret, LBRY and some other coins. At the same time, the yield on the main currency falls slightly.

Mining the ETH + SC cryptocurrency pair on this video card brings in just over $ 20 per day.

Dual mining ETH and DCR

The use of a GTX 1060 6Gb video card for mining a bundle of Ethereum and Decret gives an income of about $ 20.3 per day.

Dual-mining can bring more profit if you overclock the core and memory frequencies.

Hashrate on other algorithms

Which video card 1060 to choose for mining

The choice of the card by manufacturer is an important factor that will affect the profit in the future. After all, the money saved on the cost of a video card can be invested in the purchase of additional equipment, providing an increase in income. On average, video cards with 6 GB cost 4,000 rubles more than the 3 GB version.

And if there are only powerful options in the plan (Zotac, MSI Gaming, ASUS Expedition and others), then the difference will be 6,000 rubles. Because for mining, these values ​​are not as important as for game tasks, for which the cards are sharpened. A regular card can also be overclocked and will produce results similar to an expensive card. You can find out how to overclock 1060 for mining below.

The best option would be an average price range, which includes:

• Palit Dual;
• JetStream;
• Gigabyte Windforce;
• Asus Strix.

The latter, a little more expensive than the others, but has a better cooling system and after downvolting will pay for itself with interest.

On the other hand, if the room has good ventilation and the room temperature is below room temperature, then MSI Armor can be chosen . The best 1060 for mining in a relatively warm room would be a video card from Palit or ASUS . It is important when choosing equipment depends on the current cost, since, first of all, the calculation is made taking into account the minimum payback period of the video card .

If you can order or buy several video cards in a store at a bargain price or with an attractive discount, it is better to take the chance . Even if there is only one fan installed on the card, it will be able to provide almost the same income as the version costing 4,000 rubles higher. In this case, you just need to take care of good cooling of the farm.

A special mining calculator Wattomine can help in making a choice. He can calculate and show the profitability of the equipment.

On the subject … Bill Gates urged investors to be careful with Bitcoin

A year and a half ago, the GTX 1060 video card was one of the best, it was possible to recoup the money invested in the purchase and assembly of the farm in 7 months. But, by 2021, everything has changed and now miners no longer collect rigs on GTX 1060.

It will take about two years to fully recoup the cost of the initial payment, if the course does not vary greatly. If you are looking for a mining farm with Nvidia graphics cards, buy next generation gpu devices like the GTX 1660.

Which GTX 1060 3gb or 6gb to take?

Mining a gtx 1060 with 3GB of storage in 2021 is not a good idea. Three years ago, this graphics adapter was one of the most cost-effective crypto mining devices. By reducing electricity consumption, overclocking and not expensive at that time, it was possible to start making good money on mining and quickly recoup the investment.

But as mining became more and more popular, the demand for cards increased and, accordingly, the price of the product increased. And now, when comparing video cards between 6 and 3 GB, the cost also plays a disadvantageous role for the second version. Criteria to pay attention to when choosing cards:

• The price of video cards;
• Long-term perspective;
• Mined coin.

When considering performance, the differences between versions are negligible.

GPU Values ​​in Standard Mode:

• 3 GB – 21.5-22.8 MH / s для ETH.
• 6 GB – 22.6-23.7 MH / s для ETH.

The version 1060 3gb turns out to be more profitable, mining on it gives the same indicators. After all, the values ​​are the same, but the cost is different, but everything is much more complicated. And the development of mining should also be counted.

The version with 3 GB of memory will not be enough for mining ETH and ETC after a while. The DAG file is growing and will require more than 4 GB by the end of 2021.

Only some cryptocurrencies undergo such changes, but after all, others can also go this way afterwards. In the best case, for owners of a farm of 1060 3gb, mining will be available only with a certain type of coins, which will not be so profitable.

Therefore, counting on the future, you should choose the version with 6 GB. The payback period for the 3 GB version is 8-14 months. This is the best case scenario.

The question of cost in the case of choosing between 3 GB and 6 GB is not important, saving on the amount of memory will not justify the investment, it is better to spend 4,000 rubles more and be able to work with several different coins.

At the moment, you can pay attention to the secondary market. A huge offer of inexpensive video cards can be seen on the Avito and Yula website . When buying, attention should be paid to the warranty period and mechanical damage to the case. The priority is for video cards with a mining life of less than 1 year.

Payback of a farm of six video cards GeForce GTX 1060 6GB

Investment in mining on a GTX 1060 6Gb farm is more efficient with at least 6 GPUs. This solution reduces the unit costs for the purchase of components, because regardless of the number of video cards, you need to buy a mother card, HDD, processor and RAM. The only thing that distinguishes the farm is the power supply. Its capacity, given a load of 6 cards, should be in the region 850-1000 W .

The cost of equipping a farm from 6 MSI GTX 1060 on Amazone reaches $ 2700. If you buy it from domestic sellers, the amount will be even higher.

On the air, such a farm will bring a little more than $ 710 of “dirty” income per month. Of this amount, you will have to pay for electricity ($ 30 or more, depending on the cost of kWh in the region). The current profit, taking into account electricity, is $ 680 per month.

On the “zek”, the profit is reduced by another $ 10.

Under such conditions, mining on GTX 1060 6gb will pay off the investment in the farm for about six months.

Overclocking allows for a slight improvement in payback rates.

Why and when I decided to start making money on cryptocurrency

In July, a young guy of 19 years old, studying to be a programmer, got a job with us. Once he mentioned that he was mining on two video cards: the geforce GTX 1060 6gb, purchased in Germany, and the GTX 1050ti, which he considers the optimal choice (in terms of payback) for making money on cryptocurrencies.

At the height of the hype and general obsession with bitcoins, video cards abruptly disappeared from stores, and when they returned, they rose in price. If I decided to make a purchase of equipment now, it would not be the best moment. But I assembled the computer at the beginning of the year and the question of finances was not raised. Thoughts about the increased popularity of cryptocurrencies and farms have been spinning in my head for several days. Of course, jumping on a departing train is a stupid idea, but people around say that cryptocurrencies are the future, so I decided that it was not worth my equipment to stand idle, let it bring some money. The main criterion for mining is the video card and processor. And mine are simply created for this, although they were bought for completely different purposes.

A colleague said that in two months his profit was about 10 thousand rubles. I asked him for advice on this matter, and he agreed.

Overclocking a video card for Ethereum mining

Setting up a video card to speed up Ethereum mining (increase hashrate) consists of two stages:

• reduced energy consumption;
• increase in memory frequency.

These values ​​can be changed using MSI Afterburner.

On-air performance depends on memory speed. The most popular Samsung chips provide stable operation at the highest bus frequency. But on the power supply of the GTX 1060 core can be saved by reducing the voltage limit.

The maximum frequency increase for the core and memory is +107 and +918 MHz. At the same time, the hash rate grows to 25 MH / s . Setting the Power Limit to 65% reduces power consumption by up to 80 watts and does not interfere with the stable operation of the farm.

We adjust the optimal speed and electricity consumption

If the consumption limit is reduced below a certain threshold, stable operation of the miner is possible only if the frequencies of the GTX 1060 are reduced. As a result, you can get 50-60 watts of power consumption and hashrate of only 17 Mh / s when mining ETH.

Depending on the manufacturer, a particular Nvidia Geforce 1060 model may have different overclocking limits. For example, Samsung memory can operate at frequencies at which chips from other manufacturers generate errors. Therefore, the maximum bus and memory frequencies differ for different video cards.

To control the overclocking, you need to run a miner that will display the effective hash rate in real time. Therefore, you need to overclock the GTX 1060 smoothly and in stages. Initially, you can increase the core and memory frequencies in steps of 50 and 100 MHz. Do not be afraid that the video card will burn out in this case. In the worst case, it will either freeze or “fly off” to the initial values.

When the frequency of unstable work is fixed, you need to smoothly reduce it, choosing a value at which the miner works without errors. At the same time, you need to monitor the hash rate. Not necessarily, its peak coincides with the maximum frequency at which the miner does not hang.

Opinion

When buying a video card for a farm, you should not save money by buying devices with 3 GB memory. Mining on a GTX 1060 6Gb provides a slightly higher hashrate and ensures that the GPU does not become obsolete in a year due to the increased DAG file size.

Considering the current state of affairs in the market, investing in mining equipment is not a safe or highly profitable business. The low profitability of production greatly increases the payback period of the project. Instead of a risky purchase of hardware, it makes sense to invest in stock trading or cloud mining. The latter brings a little less income, but it is easier to stop it when the market situation changes.

Installation and configuration process

On his advice, I installed NiceHash Miner Legacy (you can download it from the official site). She does almost everything automatically. Everything is in Russian, it’s hard to make a mistake. It takes some time to benchmark at first. Then, when all the values ​​are calculated, you can choose the algorithms for the sample, the video and whether they will work together. I set both checkboxes, since I was not going to sit at the computer at that time, so it was possible to load it by 200%. Finally, we press the “start” button and the process begins. The program decides what type of cryptocurrency to mine at its discretion. You can uncheck the settings in the settings for those currencies that you consider unprofitable, but the situation on the market is constantly changing, and it is not at all a fact that you will win this “lottery” if you extract, for example, only ether or zikesh.

Related posts:

How to overclock a graphics card in a laptop: MSI Afterburner – AMD & NVIDIA I7 4770K (OC) with RX 5700 XT: Hashate | |overclocking | Benchmark | 8 Games HD Red Dead Redemption 2: Overclocked FX 8350 and RX 5700 XT in FULL HD resolution AMD Radeon RX 6700 XT Mining: Hashrate | overclocking| Settings | Power Consumption How to increase: RTX 2060 vs 2060 Super Mining- Overclocking | HiveOS | Rave OS GTX 1080 Ti VS 1080 Mining: Overclocking | Profitability (Ether) | Power consumption