How To ‘Increase/ Max/ Optimize’ Nvidia RTX 3090 Mining: Overclocking| Best Settings| Windows11&10 Settings | Ethereum | Whattomine (Profitability)| Hashrate| HiveOS & RaveOS – Mining on RTX 3090. Profitability, overclocking, settings, consumption. Let’s see how you can optimally configure and optimize this card for mining, try to overclock it, and also study consumption and profitability.
The RTX 3090 card is quite expensive at the moment, but in my opinion it is a promising option for mining ETH and other coins.
RTX 3090 Series Graphics Specifications
First of all, let’s look at the characteristics of the reference video card, i.e. without additional overclocking and optimization.
Specifications | RTX 3090 |
---|---|
Graphics Card | |
Release Date: | Sep 1st, 2020 |
Generation: | GeForce 30 |
Graphics Processor | |
GPU Name: | GA102 |
Architecture: | Ampere |
Render Config | |
Shading Units | 10496 |
TMUs | 328 |
ROPs | 112 |
SM Count | 82 |
Tensor Colors | 328 |
RT Cores | 82 |
L1 Cache | 128 KB (per SM) |
L2 Cache | 6 MB |
Clock Speeds | |
Base Clock | 1395 MHz |
Boost Clock | 1695 MHz |
Memory Clock | 1219 MHz 19.5 Gbps effective |
Memory | |
Memory Size | 24 GB |
Memory Type | GDDR6X |
Memory Bus | 384 bit |
Bandwidth | 936.2 GB/s |
Board Design | |
TDP | 350 W |
Suggested PSU | 750 W |
Power Connectors | 1x 12-pin |
How To Increase: RTX 3090 in mining, hashrate and consumption
Consider the hash rate of video cards and consumption. This table should serve as a kind of benchmark for you, i.e. your values should be plus or minus such, with a slight discrepancy of up to 3-5%. Below we will analyze how to achieve such or better results using settings, overclocking and power limitation.
Look 3080 in mining top coins.
RTX 3090 | ||
---|---|---|
Algorithm | Hashrate | Consumption (Power) |
Ethash | 114.00 Mh / s | 320.00W |
Ethash4G | 114.00 Mh / s | 320.00W |
Zhash | 155.00 h/s | 290.00W |
CNHeavy | 2650.00 h/s | 260.00W |
CNGPU | 4600.00 h/s | 260.00W |
CNFast | 5100.00 h/s | 260.00W |
Aion | 510.00 h/s | 290.00W |
CuckooCycle | 13.90 h/s | 290.00W |
Cuckaroo (d) 29 | 13.90 h/s | 290.00W |
Cuckatoo31 | 2.70 h/s | 290.00W |
Cuckatoo32 | 1.00 h/s | 290.00W |
Beam | 52.00 h/s | 290.00W |
RandomX | 2000.00 h/s | 290.00W |
Autolykos | 238.00 Mh / s | 240.00W |
Octopus | 94.00 Mh / s | 330.00W |
EquihashZero | 93.00 h/s | 290.00W |
ZelHash | 90.00 h/s | 290.00W |
KawPow | 46.50 Mh / s | 330.00W |
ProgPow | 46.00 Mh / s | 330.00W |
X25X | 12.40 Mh / s | 330.00W |
MTP | 6.40 Mh / s | 310.00W |
Verthash | 1.85 Mh / s | 250.00W |
How to Optimize: Overclocking and tuning RTX 3090
The table below lists the frequencies for which you need to raise or lower the core and video memory frequencies in order to get the optimal performance indicators for the RTX 3090 in mining.
For mining on the RTX 3090 video card, we recommend пул Binance, the most reliable and convenient, as it is both an exchange and a pool with minimal commissions. Read how to mine for binance on the website. As well as the Hive OS operating system. Registration link Hive OS (with the InsidePC promo code, you get $ 10 on your account).
For stable operation of video cards in the rig, make the correct settings for the motherboard for mining.
RTX 3080 | |||
---|---|---|---|
Algorithm | Core Clock (Mhz) Core frequency | Memory Clock (Mhz) Memory frequency | Power Limit (%) Food limit |
Ethash | +100 Mhz | +500 Mhz | 90% TDP |
Ethash4G | +100 Mhz | +500 Mhz | 90% TDP |
Zhash | +100 Mhz | +0 Mhz | 80-90% TDP |
CNHeavy | +100 Mhz | +0 Mhz | 80-90% TDP |
CNGPU | +100 Mhz | +0 Mhz | 80-90% TDP |
CNFast | +100 Mhz | +0 Mhz | 80-90% TDP |
Aion | +100 Mhz | +0 Mhz | 80-90% TDP |
CuckooCycle | +100 Mhz | +0 Mhz | 80-90% TDP |
Cuckaroo (d) 29 | +100 Mhz | +0 Mhz | 80-90% TDP |
Cuckatoo31 | +100 Mhz | +0 Mhz | 80-90% TDP |
Cuckatoo32 | +100 Mhz | +0 Mhz | 80-90% TDP |
Beam | +100 Mhz | +0 Mhz | 80-90% TDP |
RandomX | +100 Mhz | +0 Mhz | 80-90% TDP |
Autolykos | +100 Mhz | +0 Mhz | 80-90% TDP |
Octopus | +100 Mhz | +0 Mhz | 80-90% TDP |
EquihashZero | +100 Mhz | +0 Mhz | 80-90% TDP |
ZelHash | +100 Mhz | +0 Mhz | 80-90% TDP |
KawPow | +100 Mhz | +0 Mhz | 80-90% TDP |
ProgPow | +100 Mhz | +0 Mhz | 80-90% TDP |
X25X | +100 Mhz | +0 Mhz | 80-90% TDP |
MTP | +100 Mhz | +0 Mhz | 80-90% TDP |
Verthash | +100 Mhz | +0 Mhz | 80-90% TDP |
How to overclock video cards in different operating systems?
Overclocking RTX 3090 on Windows
To overclock video cards in Windows, use MSI Afterburner. This is a free graphics card overclocking utility from MSI. Download MSI Afterburner from official site and install.
Run the program and make sure that the correct video card is selected (in case you have more than one card). If you have several identical cards, you can combine the settings for all video cards at once. Enter the “Settings” menu (gear icon) – “General” – check the box next to the “Synchronize settings of the same GPU” option.
Let’s start overclocking. If for some reason the sliders for changing frequencies and voltage are not available, go back to the “Settings” menu (gear icon) – “General” – check the box next to the “Allow video adapter control and monitoring” option.
- We change the core frequency (Core Clock) – change the slider of the same name Core Clock (Mhz).
- We change the memory frequency (Memory Clock) – change the slider of the same name Core Clock (Mhz).
- We change the food limit (Power Limit) – change the slider of the same name Power Limit (%).
All the values to be guided by in the table above.
Overclocking RTX 3090 in NiceHash
If you mine with Nicehash, overclock your video card with Msi Afterburner, as described above.
See all wasps for mining in our section.
Overclocking RTX 3090 in Hive OS
We register in Hive OS… Using our link and the “InsidePC” promo code, you get $ 10 on your balance. For a complete description of the systems and a step-by-step guide for setting up and running mining on Hive OS, read and study on our website.
STEP 1 – Choosing a farm. In the Farms tab, select the desired farm.
STEP 2 – Choosing a worker. We go to the desired worker (workers), in which there are 3080.
STEP 3 – Overclocking window. Each map in the barn (worker) has a speedometer icon, as well as a common speedometer icon for all maps in the barn (worker). You can overclock or tune a specific map, or all maps at once, by selecting the speedometer labeled ALL. Here you can set the overclocking settings for all Nvidia or AMD cards.
STEP 4 – Overclocking or tuning… We register the overclocking values. ATTENTION !!! In Hive OS and further in Rave OS, the process of overclocking the memory clock (Memory Clock) is different from overclocking in Windows. You add the frequency multiplied by 2. That is, if we need to add + 500Mhz from memory, we add 1000Mhz. Thus, we will increase the memory frequency by + 500Mhz.
- Next, you need to set the core overclocking value in the + Core Clock Mhz field. Here the absolute value, if you need to add + 100Mhz, add + 100Mhz.
- In the Memory Clock, Mhz field, set the memory overclocking values (remember, the frequency is multiplied by 2).
- Power Limit – the power limit is indicated in watts, not as a percentage as in MSI Afterburner. How to find out the consumption? Look in the table above the consumption in watts opposite the hash rate and set such a limit, and then test it if you need to add or decrease it.
If the hashrate values are far from the tabular, make sure that you set the voltage limit correctly, the card may not have enough voltage and it will underestimate the hashrate.
Step 5 – Save Changes… Click “Apply” to save.
Overclocking RTX 3090 in Rave OS
Primarily, sign up for Rave OS… We will be grateful if you register using our link, it will greatly help the development of the site. If there are difficulties with this system, read mining in Rave OS on our website.
Step 1 – choosing a worker… Go to the Workers tab.
Step 2 – Configuring the worker… We go to the settings of the worker (Edit worker).
Step 3 – overclocking and tuning… Go to the Tunning masonry. And we set the values for overclocking:
- In the Core Clock offset, Mhz field, set the core frequency.
- In the Memory Clock offset, Mhz field, set the value of the video memory frequency, it works the same as in Hive OS, multiply the frequency by 2. That is. if you need 500Mhz, set 1000Mhz.
- Power limit, W – power limit in watts. The power limit is indicated in watts, not as a percentage as in MSI Afterburner. How to find out the consumption? Look in the table above the consumption in watts opposite the hash rate and set such a limit, and then test it if you need to add or decrease it.
Step 4 – Save Changes… Click the “Save & Apply” button.
Important overclocking information!
We take the values for overclocking and adjusting the card from the table above. These are optimal values for a good hash rate and a relatively energy efficient mode. Nobody restricts you from studying the limit of your card on your own. You can increase the frequencies to increase the hash rate, or decrease the power limit to reduce consumption.
HOWEVER REMEMBER, YOU DO ALL THESE PROCEDURES AT YOUR OWN RISK !!!
How do you know if the card is overclocked or lacks voltage?
If you have unsuccessfully overclocked your graphics card, you may see one of the following signals:
- Artifacts on the screen in the form of stripes, squares, and other geometric shapes.
- Screen flickering.
- Invalid balls.
- Dump the card.
More often than not, you shouldn’t worry about this, this is the normal behavior of the video card when trying to find the maximum overclocking capabilities of the card.
How to Maximize: RTX 3090 Profitability Calculator
The current and actual profitability in mining on RTX 3080 cards, see the website Whattomine.
Mining performance of RTX 3090
Energy Efficiency in Ethereum Mining
Energy efficiency RTX 3090 – 0.35 MH / W.
How to calculate energy efficiency? Divide the capacity in MH / s by the consumption W.
Consumption of watts per 1 megahash in Ethereum mining
Consumption per 1 Mh / s for the RTX 3090 is 2.80W.
Consumption for 1 Mh / s is considered as dividing the consumed watts by the number of megahashes.
Cost for 1 megahash in money
You can calculate this indicator for yourself, for this divide the cost of the card by the number of megahashes.
Frequently asked Questions
Where and what is the best place to mine on the RTX 3090?
At the moment it is ether (ETH), Binance Pool for ether mining is one of the most profitable and efficient pools. How to register on the Binance pool, read on our website.