How to flash RX 560 for mining
To flash RX 560, you will need to use 3 programs:
- ATI Flash
- Polaris Editor
- ATIkmdag patches
To find out how to flash RX 560 for mining, you need to follow the instructions exactly and carefully follow all the steps:
- First you need to make a backup copy of the BIOS file.
- We open ATI Flash, select the desired map (if there are several of them) and save the file.
- After saving, we change the name of the file, adding at the end of the extension “.rom“, And save a copy of this file in a safe place.
- In a programme Polaris Editor open this file and change the values in the window “Timing“. The values can be found on the forum, or by yourself choosing the desired value.
- When the file has been edited, save it in the folder ATI Flash entitled “bios_test»
- Find in the folder ATI Flash baht file and replace everything in it with “ATIwinflash –f –p 0 bios_test.rom“Where bios_testrom this is the modified BIOS file.
- Run the bat file as administrator and wait for the firmware to complete.
- Error windows may appear in the process, but just ignore them.
- The firmware is ready. But after the firmware, the drivers during installation may swear and to fix it, you need to apply the patch ATIkmdag patches.
An alternative way to modify BIOS.
- Get optimized timings from Bitsmedia.
- Download SRBPolaris BIOS EDITOR application.
- Save the original video card BIOS using ATI Flash and back it up.
- Edit BIOS timings with SRBPolaris BIOS EDITOR.
- Save the modified version and flash the card with this BIOS.
We remind you that the firmware of the video card entails the loss of the warranty period, there are craftsmen who have learned to bypass this limitation. Please pay close attention to the BIOS firmware.
The American company AMD has recently begun to actively develop, providing users with new high-performance technical solutions. A large number of video cards from this electronics giant are currently on the market. Competition with Nvidia forces AMD to work on improving its own products, focusing mainly on the needs of miners. Rx 560 mining in its price segment is the best solution. Therefore, you should study in more detail the advantages of mining on the rx 560, as well as what to mine with and how much to actually earn with this card.
AMD Radeon RX 560: Features and Characteristic
Amd rx video cards have always been very popular among miners. This is dictated by their low cost with excellent technical characteristics, ideally suited for the purpose of mining. It is important to note that the rx 560 is used in mining in both two gigabyte and four gigabyte versions.
The older model radeon rx 560 4gb costs more than the two gigabyte version. This factor must be taken into account when choosing video cards for creating a mining farm. Also, depending on the manufacturer, gtx 560 in mining may show different results. The choice of a video card for mining in 2018 will largely depend on the type and operating frequency of the video memory. An accurate calculation of the performance of rx 560 4gb in mining can be done only by knowing what video memory is installed in the card. Most often, these models have memory from Hynix or Micron. In more rare cases, manufacturers install Samsung video memory, which is distinguished by the highest performance and its overclocking potential. Therefore, it is worth giving preference to cards equipped with Samsung memory when mining ether on rx 560 or other cryptocurrencies.
