Remote control APP for decoder (Change channel, volume, etc)

Remote control APP for decoder (Change channel, volume, etc)
– Take a look at these tips, tricks, and solution you can use to make your life much easier with your devices whenever problems arrive and complications which you may find difficult to deal with.

Contents hide

1 Change channels without control?

1.1 AZAmerica decoders

1.2 Related posts:

If you have a decoder or receptor de TV compatible, the application G-MScreen It will allow you to handle it practically completely from your cell phone. In this way you can do without the original remote control.

The only requirement is that the decoder (STB O Set Top Box in English) and the cell phone is connected to the same network (The decoder should have a connection to your router via Ethernet or WiFi). Yes Thus, the STB will appear available in the G-MScreen application and can be accessed to control it from there.

Read This Now: Could not load XPCOM issue in Mozilla Firefox

Change channels without control?

The application G-MScreen offers practically all controls available on the physical remote control. And it is much more practical in certain respects. Especially in the search and change of channels. You can also see the program guide for each channel (although not all channels have one).

Channel organization is another strength of the app. Too easy filter HD channels, for instance. It is also simple to make a multiple selection of multiple channels to group them. This is generally very difficult to do with the physical remote control. They can also be rename or delete channels, among other actions.

The gesture control G-MScreen allows you to perform various actions. For example, change the channel or increase and decrease the volume by sliding up, down or sideways, respectively.

Additional controls include the sleep timer or ‘Sleep Timer»And parental control.

If the TV box does not appear automatically in the application, it is probably not compatible with it. In any case, you can force your search by entering your IP or the serial number of the equipment.

Read This Now: Location not available in admin android devices: Solution

AZAmerica decoders

I have tested the app with a decoder AZamerica S926 and S2010 (Android) running through IKS (internet connection) and has worked perfectly. Previously It closed when selecting the S2010, but the programmer updated the application and fixed the problem.

Unfortunately I have not found an alternative that works with equipment like the ones mentioned. There are apps for STBs from well-known brands, such as ~~Peel Remote Controller~~, Sure O Mi Remote, but none of these work with satellite TV decoders like those of the indicated brand.

Descargar G-MScreen: play.google.com