RX 470 4GB Ethereum hashrate: Mining | Overclocking| Flashing| Benchmark

RX 470 4GB Ethereum hashrate

RX 470 4GB Ethereum hashrate: Mining | Overclocking| Flashing| Benchmark – Mining on RX 470 video cards: profitability, overclocking and drivers other critical cpu performance metrics that are important to make a decision.

Not all video cards are equally well suited for mining. For the mining of cryptocurrency to be profitable, it is necessary to strictly select the parameters of the video card to create a farm. One of the most successful series is the MSI Radeon RX 470. It has received a lot of attention, as evidenced by its huge market demand.

Despite the fact that it has recently been replaced by a new family – the RX 500, the RX470 series continues to sell even at inflated prices, thanks to the easy-to-mine architecture – Polaris.

Let’s review the characteristics of the models in this series, and conclude how profitable it is to mine cryptocurrency now.

MSI Radeon RX 470 GAMING – RX 470 4GB Ethereum hashrate

MSI has released 2 variants of RX470 – 4GB and 8GB of video memory. The memory frequency is 6600 MHz and the core frequency is 1230 MHz. The company has installed 2 coolers that work silently. At the same time, two-chamber radiators allow air cooling to be carried out as efficiently as possible.

MSI Radeon RX 470 GAMING mining

A PCI-E connection system is used.

NameMeaning
Energy consumption180
Additional food8-pin
Minimum power supply450 watts
Payback183 days (16% per month)
Payback excluding e / energy145 days (20.6% per month)

If you create a farm of 6 video cards, then the consumption will be no more than 1 kW per hour. The RX 470 is a good analogue of the GTX 1060. With a 1200W power supply, it is quite possible to assemble a rig from 5-6 GPUs.

If you use algorithms that do not take the amount of video memory as a basis for work, then on the RX 470 with 4GB memory, mining will not differ much from 8GB. Also, to increase efficiency, it is worth flashing the BIOS and setting higher frequencies for the device to work.

ASUS RX 470 Minning Edition mining

This version is released by ASUS specifically for miners. This is expressed in the fact that the video card is overclocked to the maximum and has a flashed BIOS. Samsung memory provides additional computing power (Samsung creates chips specifically for cryptocurrency mining).

For beginner Miners, this has become a tempting proposition, since they don’t have to make any additional adjustments. It is enough to purchase rx 470, install the miner, and you can immediately start mining the currency.

Read This Now:   Best Bitcoin (BTC) - Bitcoin Mining Calculator
NameMeaning
Energy consumption120
Additional food8-pin
Minimum power supply450 watts
Income$ 26.19 / month
Income excluding electricity$ 17.55 / Month
Memory4 GB GDDR5 7000 MHz

Air cooling consists of 2 noisy coolers. But even with intense loads, the temperature stably stays at about 65 degrees.

Sapphire RX 470 Nitro +

Sapphire RX 470 Nitro + mining

This series can be called the most powerful in comparison with other models. On an rx 470 video card with 8gb memory, mining will produce power corresponding to the older models – RX 480 (operating at a frequency of 2000 MHz).

NameMeaning
Maximum power consumption175
Additional food8-pin
ConnectorsDisplayPort (2шт), HDMI (2 шт), DVI-D
Memory8 GB GDDR 8000 MHz
Recommended power supply500 watts

Even without overclocking on ether mining, you can get a hash rate of 24.5 mh / s.

mine etherium rx 470

The main role here is played by the video memory frequency of 8 Ghz. Cards with 4 gb memory will produce a lower frequency of 7 or even 6.6 Ghz.

Gigabyte Gaming 1 RX 470

As the name suggests, the conclusion is that Gigabyte Gaming 1 RX 470 is a gaming device. But nevertheless, it is great for mining. The main distinguishing feature here is the cooling system.

Gigabyte Gaming 1 RX 470 mining

The WindForce 2X cooling system keeps the temperature during etherium mining within 55-60 degrees.

NameMeaning
Maximum power consumption120
Additional food8-pin
ConnectorsDisplayPort (3 шт), HDMI, DVI-D
Memory4 GB GDDR 6600 MHz
Recommended power supply500 watts

There are other series of video cards that are suitable for mining (for example, Power Color, Asus strix, etc.), but we will not analyze them, since they all produce approximately the same hash rate.

Mining Ethereum with RX 470

Ethereum is the most profitable algorithm for the RX 470 series. The average hash rate will be around 24 megahashes. With proper overclocking, this figure can be increased to 30. For the Radeon RX 470, this mining figure will be “Above Average”.

If you compare the RX 470 with other graphics cards, you immediately see that this series is able to compete even with older GPU families.

Video cardHashrateConsumed energyEthash Efficiency (MHS / W)
RX 55010 MH / s65 Watt0.153
RX 46011 MH / s75 watts0.146
RX 56012 MH / s90 watts0.133
RX 47024 MH / s120 watts0.200
RX 57025 MH / s150 watts0.166
RX 48029 MH / s150 watts0.190
RX 58030 MH / s185 watts0.162
RX Vega 5632 MH / s210 watts0.152
RX Vega 6436 MH / s295 watts0.122

Without firmware and driver settings, payback at 24 MH / s will be about 424 days. These results come out with a standard cost of a video card of $ 390.

Read This Now:   FPGA mining with a human face
CurrencyETH
ETH income per day0.00294964
ETH income per month0.0884892
Hashrate24 MH / s
Income USD per day$1,15
Income USD per month$34,45
Consumption120 watts
Net profit per day$0,92
Net profit per month$27,6

For the 4GB version, NiceHash pool capacity calculator shows the following results.

AlgorithmHashrate
Blake256r8vnl0 GH / s
Go0 kH / s
DaggerHashimoto25.07 MH / s
Decred0 GH / S
CryptoNight0.65 kH / s
Equihash280 sol/s
Pascal0.65 GH / s
X11Gost6.2 MH / s
Is0 GH / s
Blake2s0 GH / s

The CryptoNight algorithm shows a pretty good prediction. But Monero mining will be inferior to Dual mining Decret and ETH.

The ZEC algorithm can show a high level of Sol, but they have long since fallen in price. CUDA is more suitable for mining Zcash

At the current BTC rate ($ 6741), the calculator predicts a profit of $ 16 per month.

mining results rx470

The Sapphire Nitro + AMD Radeon RX 470 video card, which is considered the best option for ether mining, unfortunately, did not show a good result when overclocked.

Instead of the expected 8.8 or 9 GHz, overclocking is possible only up to 8.2. This indicator is the maximum in the WattMan application. Utility ASUS GPU Tweak II made it possible to overclock up to 8.4 Ghz. But even this result is not enough.

With such indicators, the hash rate was only raised by 1.3 Mhs. Unfortunately, the older RX 480 series outperform Sapphire Nitro in this regard.

With the right setup, you can lower your electricity bill without sacrificing performance. Setting the core voltage to 88mv and setting 1070/2100, we get a video card consumption of only 57W. At the same time, the hash rate remains at the level of 27.6 mh / s.

This setup option is ideal for setting up farms as it allows you to install multiple devices into a single outlet. For one or a pair of GPUs, it makes no sense to make such settings, since the difference in consumption will be insignificant.

Dual mining Decred and Ethereum

Dual mining is a process when 2 cryptocurrencies are mined at the same time. This maximizes the GPU load while increasing profitability. The most profitable combination for dual mining is Decred and Ethereum (ETH).

Dual mining Decred and Ethereum

Although the video card is busy mining another cryptocurrency, the ether hash rate remains at 23 Mh / s. Decred shows results at 937 Mh / s. These are excellent figures, considering that the video card has not yet been flashed. Having dispersed it, we will be able to increase the speed to 28 and over 1000 Mh / s.

dual mining ethereum and decree

Usually, users do not have to run dual mining on their own. Mining programs automatically start mining two cryptocurrencies when it is profitable. To do this, you just need to make a benchmark and set the resolution in the settings.

Read This Now:   Tesla V100 32GB Mining Hashrate: Power Earnings ( Is it good for mining ?)

If other currencies (Zcash, Cryptonight) become profitable at some point, they will also be launched.

With the help of special settings, you can slightly increase the performance of dual mining, as well as reduce consumption.

For maximum processing power, the voltage setting can be set to 967mv (1200/2100 frequency). GPU power consumption will be 95 watts.

As a result, we get a hash rate performance of 30/450. The dcri setting is 30. If you raise it to 40, then the computing power drops. This is the result we get on a GIGABYTE RX470 4GB video card.

If we reduce the frequency setting to 1070/2100, then we get 880mV. In this situation, the consumption drops from 95 W to 70. The hash rate remains at 28.8 / 430. Thus, the profitability of production remains practically unchanged, but the cost of electricity is falling. And this will be especially noticeable when creating a farm.

Overclocking RX 470

Overclocking increases the performance and profitability of the GPU by varying the voltage applied. Without knowledge, experimenting with this is not worth it, as you can easily spoil the device.

For overclocking, you need the afterburner program. The utility is needed to make changes to the frequencies of the device.

Overclocking RX 470

The FurMark utility will also come in handy, which will allow you to detect settings above which the device will no longer work correctly. As soon as this happens, the frequency will be reset to the base one.

More details about overclocking methods are described in the video.

Reducing power consumption RX 470

Memory overclocking in mining RX 470

RX 470 firmware

To update the BIOS, you need 2 programs: for editing and for firmware.

First, let’s save the original BIOS. And Atiflash will help us with this. We make 2 copies at once.

rx 470 firmware

After that, launch the Polaris Bios Editor program, and open the saved copy for editing.

how to flash an rx 470 card

We edit only one thing – timings (micron), located in the lower right part of the screen.

editing timing

Press the button “One Click Timing Path” for the program to independently set the timing for the installed video card. You can install them manually, but they are different for each GPU.

timing edition rx 470

Now, among the results obtained, we find timings with a frequency of at least 1375, and copy them.

timings with a frequency of at least 1375

To do this, select the desired timing, and select a line at the bottom of the screen. Copy the text and paste it into the next timing line, replacing the value that is set there.

save timings

When the action is completed, click on “APPLY CHG” to save the settings. When all actions are completed, we save the new flashed BIOS in a separate file.

launch

Now open the folder with the Atiflash program, and transfer the file with the new Bios there. All that remains is to open startnew.bat and the installation process will begin. If there are problems, then start.bat returns the original firmware.

Drivers for mining RX 470

AMD has released special mining drivers that can increase performance. They can be downloaded from the official website.

Video cardAlgorithmHashrate (old driver)Hashrate (new driver)
Shapphire Nitro+RX 470 4 GBEthash27.1 MH/S X 1 GPU (5 GPU rig = 695 W)29.5 MH/S X 1 GPU (5 GPU rig = 671 W)
Shapphire Nitro+RX 470 4 GBEthash + Sia Dual27.4 MH/s + 460 MH/s x 1 GPU (5 GPU rig = 858 W)29.5 MH/s + 410 MH/s x 1 GPU (5 GPU rig = 832 W)
Shapphire Nitro+RX 470 4 GBEthash + Decred Dual27.3 MH/s + 627 MH/s x 1 GPU (5 GPU rig = 840 W)29.5 MH/s + 678 MH/s x 1 GPU (5 GPU rig = 822 W)

Based on the test, clear positive results are visible. But this is a beta version of the driver, without technical support and guarantees of performance. Therefore, if it does not work correctly, users should experiment with other drivers.

RX 470 Specification

From all this, it is easy to conclude that mining on the RX 470 is really profitable. And according to the criteria “Price – quality – performance” this device can be safely called the winner in 2017.

If we look at the characteristics, we will see that the video card is not inferior to its competitors and older series.

SpecificationMeaning
Number of video chips1
Minimum chip frequency1206 MHz
Overclocking frequency1254 MHz
Number of processors2048
Shader version5.0
Video memory size4 GB
Memory typeGDDR5
Effective memory frequency6700 MHz
Memory bus width256 pages
Connection interfacePCI-E (3.0)
Maximum resolution2560×1600
Maximum power consumption110 watts
Recommended power supply450 watts
Cooling type Active air
Number of fans2 axial
Length / thickness of the video card276 mm / 37 mm

Well, competent overclocking will allow you to make the payback as quickly as possible. The main thing is to understand what you are doing, since an incorrectly selected frequency will harm the device.


Notice: ob_end_flush(): failed to send buffer of zlib output compression (1) in /home/gamefeve/bitcoinminershashrate.com/wp-includes/functions.php on line 5373

Notice: ob_end_flush(): failed to send buffer of zlib output compression (1) in /home/gamefeve/bitcoinminershashrate.com/wp-includes/functions.php on line 5373