Increasing the hash rate of Radeon RX570 Nitro 8 GB
No modern video card can not be called a perfect option. For example, Nvidia manufacturers did not take care of the firmware, so after purchasing it, many users begin to solve this kind of puzzle. Firmware is needed in order to increase the hashrate. As a rule, after it the result is increased by 40-50%. The average hashrate in the factory state varies 18-21 Mh / s, which is a relatively low figure. Taking into account the cost of the card, this is a rather low indicator, and therefore it will pay off for a long time.
When using the Afterburner program, it is possible to increase the rate on average to 23-25 Mh / s. Unfortunately, even this indicator will not save the miner from a long payback period (about 29 months). In this case, it is worth noting that AMD seriously loses the card from Nvidia. But the firmware can fix the situation. After the BIOS is reflashed, the card can be sharpened for mining and organize optimal overclocking. Do not forget to set the optimum timing, and the most appropriate frequencies. However, this is a process that requires certain knowledge, so miners rarely can perform it on the first attempt. For some users, it is possible to achieve optimal results only from the 10th attempt, which also does not always add optimism. But after the work is finished,
After the firmware is implemented, the user can expect to receive the following indicators:
- When using the Nitro, Asrock, Expedition model with Samsung’s memory, the hashrate index will be around 31.7MH / s
- Gigabyte Aorus / Gaming using Samsung memory figures up to 30.5Mh / s
- Asus loses a bit – 29.9Mh / s.
It is important to take into account that the above indicators are maximum as a result of the check, therefore, they should be guided during the selection process. As a rule, similar results are given to be achieved only on maps from the manufacturer Samsung. Regarding Hynix, this effect applies only to Nitro.
Another option that can play hashrate is the choice of the operating system. Regarding Hive, it can provide stable performance, through additional functions: you can organize work with a flash drive without the need to connect the HDD, WatchDog firmware, as well as the convenience of monitoring workflow compared to Windows. Accordingly, the first version of the operating system is best suited for mining.
