Scythe Fuma 2 in the test – asymmetrical all-rounder for hot hours
If you take a look at the German charts – those of the CPU coolers, of course – then the coolers from the manufacturer Scythe jostle with beQuiet for the top positions. With 18 years of experience in the field of passive and silent cooling, the company registered in Tokyo, including a branch in Germany, should be well prepared for this battle. What exactly makes the Fuma 2 so popular besides the “fits everywhere” design and moderate price, you can find out in the following article:
Packaging / scope of delivery
Apart from a small pad made of foam for padding the cooling fins, the packaging and its interior are completely made of cardboard. Plastic bags are also used sparingly, there is not much rubbish left after unpacking. The outside of the box is completely printed, in addition to product images and features, there are also various specifications and dimensions on the pages.
In addition to mounting brackets and fan clips, our accessories include a generous tube of thermal paste, 4-pin PWM fan splitter and small screwdrivers. The Intel backplate is already prepared, screws and plastic fixings have already been attached in the factory.
Assembly / installation
The existing backplate is used for the AM4 socket, the two silver brackets are mounted with four rubberized spacers and screws. After the two spring-loaded screws have been fixed in the brackets with the screwdriver provided, all that remains is to attach the fans.
In contrast to many other coolers, the fans are only loosely attached to the cooler at the factory, so the Kaze Flex Slim (front) and Kaze Flex 120 (middle) are hooked into place with the different sized clips.
Both fans are generously rubberized and run in opposite directions, which should lead to a higher static pressure. In the picture of the side profile, the asymmetrical design of the Fuma 2 can be seen again. RAM banks are not blocked either on the front or on the back; the rather low installation height of almost 155mm should fit into most cases.
Overall, the cooler is well made, especially the winding heat pipes are impressive. Here and there a few cooling fins are not completely deburred. You shouldn’t expect bloody fingers now, but there is a rough feeling when you stroke them.
Specifications
The following is an overview of the technical data; further information can be found on the manufacturer’s website as usual.
Overall dimensions:
137 x 131 x 154.5 mm (including fan)
Total weight:
1.000 g / 33,8 oz
Fan specifications
Model name:
Kaze Flex 120 Slim PWM
Kaze Flex 120 PWM
Fan dimensions:
120 x 120 x 17 mm
120 x 120 x 27 mm
Noise level:
2,7 ~ 23,9 dBA
4,0 ~ 24,9 dBA
Air flow:
8,28 ~ 33,86 CFM – 18,40 ~ 75,24 m³/h
16,6 ~ 51,17 CFM – 36,89 ~ 113,71 m³/h
Fan speed:
300 (± 300 rpm) ~ 1,200 rpm (± 10%) (PWM controlled)
Static pressure:
2.26 ~ 8.83 Pa / 0.23 ~ 0.9 mmHO
0.75 ~ 10.3 Pa / 0.762 ~ 1.05 mmHO
Scythe Fuma 2 (SCFM-2000)
 | in the inflow | 52,90 €*Stand: 21.02.21 13:08 |
 | In stock, delivery time 1-3 working days | 54,00 €*Stand: 21.02.21 12:55 |
 | Aachen: if pre-ordered in approx. 48h -72 in stock Alsdorf: in stock dispatch warehouse: in stockStand: 21.02.21 13:09 | 55,90 €*Stand: 21.02.21 13:11 |
- 1 – Introduction and technical data
- 2 – cooler test, results and conclusion
Related posts:
Aqua Computer Kryographics Next for the GeForce RTX 3080 and RTX 3090 in the reference design – Solid GPU water block in the test 
G.Skill ENKI 360 All-in-One compact water cooling in the test – first attempt successful, but with weaknesses 
Office and gaming in one? We are building a work 
Cooler Master Hyper 212 RGB Black Edition – Tried and tested in a new look 
Scythe Ninja 5 in the test – cooling colossus with space problems 
Corsair Hydro Series XG7 RGB water block for the reference design of the NVIDIA GeForce RTX 3080 and RTX 3090 in the test
