Solution Error: ‘My pc Screen Goes Black’ in Windows 7, 8 and 10

Windows is a great system for PCs that offers many wonderful featuresIt is arguably the best computer system that currently exists. But no matter how good a system is, if it is overloaded with complex programs or files, it can have failures.

This is the same case with Windows, such a system sometimes throws a bug known as “Black Screenshot”. Such a problem is very common in this system, which many users complain about this inconvenience. We will be talking to you about the why this failure occurs and how to solve it.

Why was the “Black Screenshot” caused in any of the Windows operating systems?

When this kind of problem occurs it is very difficult to know for sure the root of the problem. Furthermore, even an experienced technician will not be able to tell you the root of this failure with just a glance. But if he can give you the form of a few things that might make your pc have this kind of error. However, let’s see all the possible causes so you can be more oriented when it comes to repairing the PC.

In the worst case RAM is associated with this problemIf the RAM memory overheated and the electro was not working, it may have burned out. If the RAM memory is not good, it is to be expected that the computer screen does not turn on. To rule out this possible failure, take a good look if the screen does not turn on at all.

Yes, even if it is some characters appear on the screen then means that the RAM is not bad. The black screen fault can also be caused by RAM is not enough for the computer.

Knowing for sure if the problem comes from the hard disk is a bit difficult, unlike the RAM memory this cannot be deduced so easily. But the failure if it could be due to hard disk, the best way to get out of such doubt is putting that hard drive in another computer. In case Windows starts normally then there are no problems, but if it doesn’t start then it is disk problem. The only solution would be to format the disk and install Windows again.

Stop to think for a moment and try to remember if you have recently installed a graphics driver or any other type of driver. Since the drivers many times make Windows unable to start some processes, then when Windows loads it cannot enable the graphics process and therefore everything looks black.

If your Windows does not even start and you have already tested the hard disk on another PC then it means it is BIOS problem. The BIOS is a configuration that all computer motherboards have.

Possible solutions for “The black screen”

Having explored all the faults alone we can give you 3 solutions to such problem. These 3 are to reconfigure the BIOS, repair the computer or uninstall a driver or program. Trying one of these three solutions can solve your problem.

Uninstall a driver or program

To do this you have to turn off the computer then turn it back on just when you press the power button and start pressing the “F8” key. In a moment you will get an options bar that has several options in it. There he looks for the option that says “Safe Mode”And with the keyboard you will position yourself on it, then press Enter. There Windows will start with low resolution graphics, now you go into the control panel and delete programs or drivers that the pc has.

In this case, press “F8” again while you start the computer and in the options bar that will appear, look for the one that says “Repair equipment”And select it. Then wait for the process to finish. You can also choose another of the system recovery options.

Configure your computer’s BIOS

To configure the BIOS, this turns on the computer and at once start pressing the “DELETE” key. Doing this you will access the BIOS configuration. Go to “Preview” and try to change the options of the two bars that appear there.