[Test] In Win 303 – Conseil Config
| Specs | Price
Hi everyone!
Back at In Win today and after the test of the last 805 I am going to present a model that is intended to be more Mister Toutlemonde oriented than the others, the 303! Indeed when the brand has accustomed us to offering aluminum cases of an irreproachable quality of manufacture, the 303 goes a little off the beaten track by switching to steel, enough to lower the final note to arrive at around 100 €. The program is compatible with an ATX motherboard, 4 bays for disks and a tempered glass window. Let’s see what it gives and if the brand remains faithful to its quality of manufacture above all!
In Win 303 | |
---|---|
Motherboard compatibility | Mini-ITX, Micro-ATX, ATX |
Materials | Steel and tempered glass |
Available colors | Noir Blanc |
Number of berries | 2 x 3,5″ 2 x 2.5″ |
Fan location (s) | 3 x 12 cm below 3 x 12 cm above 1 x 12 cm at the back |
Fan (s) supplied | 1 x 12 cm at the back |
Expansion slots | 7 |
Front connectors | 2 x USB 3.0 2 x USB 2.0 2 x Jack 3,5 mm |
Maximum length of the Graphic card | 35 cm |
Maximum height of CPU cooling | 16 cm |
Additional features | Dust filters below Logo and connectors on the luminous front Graphics card support |
Dimensions | 48 (l) x 50 (H) x 21.5 (L) cm |
Weight | 10.88 kg |
Guarantee | 2 years |
Price | ~ 100€ |
The In Win 303 is therefore compatible with a motherboard ranging from mini-ITX format to ATX. The dimensions are rather reasonable with a height of 50 cm for 48 cm of length and 21.5 cm of width, it is however not a small model, especially in width. With the use of steel and a tempered glass window the weight is quite substantial, with its small 10.88 kg on the scale, it announces a 303 which must be rather solid.
With the correct dimensions the components can reach more acceptable lengths, the cooler for example can go up to 16 cm in height and the graphics card 35 cm, which therefore has a rather wide choice.
The cooling is rather atypical here, 3 fans of 12 cm on the bottom, 3 fans of 12 cm on the top as well as a fan of 12 cm on the back, all this unfortunately and as usual with the brand alone a fan is present at the rear. It is a pity that In Win does not offer more original fans, this could help with the results obtained in the tests and would exempt the future buyer from an additional purchase.
Storage is quite small, with 2 bays for 3.5 ″ hard drive and 2 bays for 2.5 ″ SSD, this should however be sufficient for the vast majority of users, hard drive fans will have to look elsewhere though. As we see more and more 5.25 ″ bay point here, it will be necessary to do with a USB drive if the need arises.
Of course there is a large dust filter here on the underside (where the air enters), In Win has added LEDs on the front (the logo as well as the connectors) and a small support is present which will serve as a support for a graphics card (adjustable in height).
Offered at a price of around € 100, the characteristics here are very close to what can be found on a much more expensive model of the brand, but made of aluminum, this could be very interesting for people looking for an atypical case but with flawless build quality.
The box could not be more classic, made of cardboard everything that is more banal and sober, no pompous marketing on the horizon! We find only the name of the brand and the logo on the face allowing the opening.
On one side we find a listing of the strengths of the beast, namely a sober design, LEDs on the front, tempered glass window etc. On the other hand the full technical characteristics are present, enough not to have any surprises during the purchase.
When opening the box as usual In Win takes good care of its product, each corner is equipped with a thick foam mold to keep the animal in place while effectively protecting it from shocks. In addition, the case is packed in its black bag thus avoiding any potential scratch.
The bundle consists of:
- 1 x installation manual
- 1 x graphics card holder
- 1 x Large Cable Tie Handle
- The necessary hardware packed in individual bags
As usual with In Win the bundle is neat, a graphics card support is present (adjustable in height) as well as plastic cable ties and the necessary screws packed in individual bags, the minimum union but presented in an orderly manner.