AIO
Thermaltake Floe RC ARGB
The Thermaltake Floe RC ARGB It is an AIO cooling system, which is capable of simultaneously cooling both the processor and the RAM modules of our PC. To perform this last operation, the Floe uses two water blocks special. One of them cools the processor. While the other, is responsible for cooling the RAM.
How radiator There will be two versions: one with three 120mm fans (the RC 360), or one with two 120mm fans (the RC 240). For both models, the fans will have ARGB lighting. Which can be controlled by the motherboard or by a control attached to the AIO kit itself.
Boxes
AH T600
The futuristic computer case Thermaltake AH T600 it's a new type model Open Frame The inspiration that the company has followed is clearly military. Inside we can mount motherboards, from the mini ITX format to the most common ATX format among users. There will also be room for two bays for 3.5-inch drives. Plus another two for 2.5 inch units.
For refrigeration, The box will allow radiators up to 480 mm to be mounted on its front. And also one of 360 mm in its upper part.
View 51 Tempered Glass
This colorful Thermaltake box will be produced in white (as in the previous image) or black. In its front part it will have two mounted fans 200 mm, with ARGB lighting. The I / O of the box is located on its right side, in an upright position. And it allows the installation of the graphics card in an upright position.
The box is in full tower format. And the left side of the box is formed by numerous ventilation openings. For storage, the box will have two 3.5-inch bays and two 2.5-inch bays.
RAM
Thermaltake TOUGHRAM DDR4-4400
Another of the releases for the new CES 2020 has been the new RAM TOUGHRAM DDR4-4400. This RAM lacks the typical RGB lighting that usually characterizes the DIMMs of this manufacturer. And it comes to complete the memory ecosystem that the manufacturer has available to all its customers. The DIMM they will be, as expected, compatible with the Intel XMP 2.0 technology. So that the configuration of the memories on the motherboard is very easy to perform.
Power supplies
Toughpower PF1
This is a version without RGB lighting of its Toughpower PF1 ARGB model. This model was launched last year by the brand. The range of powers for those that will be available it is the same: from 650 W to 850 W. And it will continue to retain the same compact form factor (only 140 mm) of the model that is already on the market. Always with efficiency 80 PLUS Platinum.
Toughpower GF2 ARGB
This source model will have an efficiency of 80 PLUS Gold. Owning ARGB lighting which can be synchronized with our motherboard. It will also have a very low noise (less than 30 mV) in its power channels. As well as a very tight voltage regulation (± 2%). Your range of powers it will go from 650 W to 850 W.
