How To increase RTX 3060 Ti LHR Mining: Overclocking| Best Settings| ETH & MSI

Best overclocking settings for GeForce RTX 3060 Ti LHR

The GeForce RTX 3060 Ti is considered to be one of the best mining graphics cards ever made. Delivering speeds up to 60 MH / s with a total power consumption of just 130W, it is by far the most efficient GPU for Ethereum mining. Unfortunately, almost all new GeForce RTX 3060 Ti cards now come with a built-in cryptocurrency limiter, hence the “LHR” label in their name. The built-in mining limiter makes the new RTX 3060 Ti cards less profitable and less energy efficient than the original non-LHR models. However, with some tweaks and proper software, even the RTX 3060 Ti can provide pretty good mining performance. Find out more to find out how to do this.

42+ MHs RTX 3060 Ti LHR Overclocking Settings in HiveOS With NBminer

In this video, I show you how to set up a flight sheet in HiveOs for NBminer fast and easily. Disclaimer: I only show you what setting I have for my GPUs, that works fine for me. You change your overclocking setting at your own risk. NBminer helps your RTX 3060 ti with LHR to unlock about 70% of its true potential.

On paper, the RTX 3060 Ti LHR is identical to the original RTX 3060 Ti (no LHR). Both cards have 4864 CUDA cores as well as 8GB of GDDR6 video memory and can deliver up to 16.2 teraflops of FP32 performance. However, the GeForce RTX 3060 Ti LHR comes with a built-in mining limiter, which means it can only mine around 30 MH / s when mining Ethereum, which is almost 50% less than the original GeForce RTX 3060 Ti (no LHR). To make matters worse, the original RTX 3060 Ti is nearly impossible to obtain these days as many AIB manufacturers have stopped producing it. The only non-LHR RTX 3060 Ti model you can buy these days is the Founders Edition model,  which can sometimes be found on Amazon , but is quite expensive and usually out of stock.

Note . We highly recommend using the latest NBMiner or GMiner if you plan on mining Ethereum with the RTX 3060 Ti LHR. These miners partially bypass the mining limiter built into the card, which allows the card to increase the mining hash rate up to 34%.

However, despite the disappointing Ethereum mining performance, the new RTX 3060 Ti LHR is still a pretty decent GPU for mining. When it comes to Ergo mining (ERG), the RTX 3060 Ti LHR performs about the same as the GeForce RTX 3070 LHR but costs less. It’s also good for mining altcoins like Conceal (CCX), Ryo (RYO), and Ravencoin (RVN).

RTX 3060 Ti LHR Overclock Settings for Hynix Memory in HiveOS

RTX 3060 TI LHR Overclocking setting for Hynix memory type that gives up to 40++MH/s hashrate with LolMiner LHR Unlocker in HiveOS.

We use hashrate.no to get the overclocking setting for this RTX 3060 TI LHR card. They have specific overclocking settings for Hynix memory that you can apply in HiveOS to get up to 40+MH/s in hashrate for algorithm Ethash when mining Ethereum.

Over the past couple of months, there has been a lot of progress in unlocking LHR cards for mining. Many cryptocurrency miners, including NBMiner, GMiner and T-Rex miner, now offer software solutions that partially bypass the built-in GeForce RTX 3060 Ti mining limiter. This means that with the correct overclocking settings and software, the base mining hashrate of Ethereum RTX 3060 Ti can now be increased from an initial 30 MH / s to 45 MH / s. In this guide, we’ll show you the best overclocking settings for mining RTX 3060 Ti LHR and see which miner works best with this card.