Installation: Hive OS 2.0 Mining| USB flash Drive -Best Guide + Tutorials

How to operate the rig, the main nuances after setup

Working with the rig after activation is carried out through the web interface in the user’s personal account on the Hive OS website . The control is carried out by clicking on the worker corresponding to the rig. The main control buttons are displayed in the upper part of the worker window:

They allow you to perform the following actions:

• manage power:
• manually set network parameters for communication with the rig, including work via VPN;
• execute Linux commands;
• start mining;
• work with the rig console;
• work with a miner;
• use watchdog;
• manage temperature conditions and fans.

Mining is turned on by pressing the rocket button, after which it will be possible to select the desired flight list:

After selecting it, click the apply button, and the rig will start mining in accordance with the given configuration:

The rig menu will display information about its state, including information about each video card, their temperatures, hashrate, stability and other important parameters:

If you have upgraded the equipment, but do not know how to remove the worker on the hive os, or for some reason you are not satisfied with the work in the OS, go to your account. Double-click on the farm name to open the worker settings. The remove hardware button is in the right corner next to the farm name.

The system will ask you to confirm the seriousness of your intentions, type yes and press confirm.

Once the worker is removed, you can create a new hardware configuration. To delete a farm completely, go to advanced settings, the “Delete farm” button is at the bottom, the process is similar to deleting a worker.

Please note that after deleting the farm, all data about the settings of the video cards, flight lists and wallets of the coins you have selected will be deleted. We’ll have to re-create everything.

To configure Hive OS wifi, you must enter the wifi command and register ssid and pass to connect to the router. In case of problems, open the USB flash drive through Windows and find the configuration file to enter the name and password of the wireless network. If the system displays the wifi adapter as one of the connected USB devices without classifying it by destination type, then the farm is offline. Most likely, you will not be able to start mining at all, even if everything worked fine on Windows. Linux operating systems are sometimes not friendly with some wifi adapters and there is nothing you can do about it. A cable connection is still more reliable, mining on Windows or Hive OS wifi is not a good idea.