AMD Radeon RX 570: Review 2021 | Test| Specs| Hashrate | Profit (Bad and Good)

How to flash RX 570 for mining

The RX 570 firmware for mining is an important procedure. Without this, it is impossible to achieve the highest hash rate. Any miner can flash a Bios 570 video card, based on the instructions. The correct RX 570 firmware for mining can be a turning point in the mining of coins, which will affect profits and allow you to make more money. Stock firmwares for cards can be found on specialized sites and forums for miners Techpowerup.

You can find the timings yourself, for example, here: https://forum.bits.media/index.php?/topic/38510-eth. The SRBPolarisV3 program is ideal for editing the BIOS, the download link is https://mega.nz/#F!TVgGHQZS!yfmtIvbF67iS4QrEJqb26g.

If the video card has Samsung memory installed, then we change the timings from 1750 and higher, and from 1500 and higher for other versions.

It is worth paying attention to the compliance of the program with the maximum characteristics of the equipment in order to get rid of the overclocking of the video card after overclocking. It is recommended to leave 5% of the total performance unused so as not to damage the device. This will increase the service life of the equipment and get rid of freezes and errors during mining.

Overclocking the RX 570 8GB video card, for mining, will require a BIOS firmware. To do this, you need to download the ATIWinFlash program from AMD. With it, you can save the original BIOS from the video card to your computer. There are two versions of programs, textual and with a shell, the first is easier to use, and the second is much more functional, but both are great for flashing.

For Polaris cards, you can use the free SRB Polaris BIOS Editor.

With the help of it you can change the taymin gov RAM , increase the processor speed, adjustbest timing value for a specific manufacturer. the cooling system and reduce power consumption.

Polaris BIOS Editor can handle these add-ons just fine. It is also distributed free of charge. The application has an automatic selection of the best timing value for a specific manufacturer.

Finally, you will need to use the Atikmdag patcher patch to avoid errors when installing drivers.

The firmware of the video card entails the loss of the warranty period, but there are “Experts” who can teach you how to bypass such moments. Be careful.

And by and large, using the latest versions of the Claymore and Phoenix miners, you don’t need to sew Bios at all. In Claymore’s batch file , write the -strap and –rxboost options , and in the phoenix –mt option . By choosing the correct numerical value for these options and setting the optimal overclocking parameters, you will get 30 Mh / s on the factory firmware.

Detailed video card firmware in a special section.