Categories: Graphic cards

EVGA is showcasing bespoke Geforce GTX 1080 and GTX 1070 at Computex

In May, Nvidia launched the Geforce GTX 1080, which launched on May 27. Two days later, the veil was lifted for the scaled-down and cheaper GTX 1070, which will hit store shelves on June 10. Not entirely unexpectedly, Nvidia’s new generation is in focus at this year’s Computex trade fair, and EVGA is making a big splash with several models.

Five graphics cards are displayed on site, where everything from Nvidia’s reference circuit boards to larger solutions is on the menu. First of all, the Geforce GTX 1080 models ACX 3.0 and Superclocked Gaming ACX 3.0 are shown. As the name reveals, this is the new ACX 3.0 cooler, which is mounted on Nvidia’s reference design.

For the regular model, these are 2,560 CUDA cores in the reference frequency 1,607 MHz at base and 1 733 MHz at boost, which is accompanied by 8 GB of GDDR5X at 10,000 MHz. The superclocked variant leaves the GDDR5X memory untouched, however, the clock frequency of the graphics circuit is raised to 1,708 MHz and 1,847 MHz, respectively.

These are followed by the Geforce GTX 1080 FTW Gaming ACX 3.0, where a tailored circuit board with 10-phase power supply via two 8-pin PCI Express is on the menu. This is accompanied by the worst GTX 1080 Classified Gaming ACX 3.0 which goes up to 14 phases. The third fully tailored variant is a water-cooled variant under the Hydro brand.

When it comes to EVGA’s very own variants, it’s again about 8 GB GDDR5X with pristine clock frequencies. When it comes to the graphics circuit itself, it is overclocked to not yet nailed clock frequencies, but the only thing EVGA can say with certainty is that they will be screwed up over Superclocked Gaming ACX 3.0.

Finally, EVGA gives a first taste of the Geforce GTX 1070, where the new cooling solution ACX 3.0 and Nvidia’s circuit board are in focus again. In addition, the company is holding tight to the details, but promises to reveal more in connection with the start of sales on June 10.

Nvidia’s BIOS is holding back overclocking

In connection with the presentation of EVGA’s latest models, the company commented on the many reports that Nvidia’s own circuit board is holding back overclocking of both Geforce GTX 1080 and GTX 1070. This is true to some extent, but should only be part of what holds back the graphics card.

According to EVGA, it is more Nvidia’s BIOS than hardware that puts a stop to further adventures. This is something the partner manufacturer hopes to remedy by hacking the software, but when and if it will become a reality is not yet known.

► Read all articles from #computex-2016

Miners Hashrate

Recent Posts

Mining RTX 3070 at NiceHash: Overclocking, tuning, profitability, consumption

Mining on RTX 3070. Overclocking, tuning, profitability, consumption: If you are interested in finding more…

6 months ago

Mining GTX 1660, 1660 Ti, 1660 Super: Overclocking, settings, consumption

Mining with GTX 1660, 1660 Ti, 1660 Super. Overclocking, settings, consumption, profitability, comparisons - If…

6 months ago

Mining RTX 2070 and 2070 Super: Overclocking, profitability, consumption

Mining with RTX 2070 and 2070 Super. Overclocking, profitability, consumption, comparison What the RTX 2070…

6 months ago

Mining with RTX 3060, 3060 Ti. Limitations, overclocking, settings, consumption

Mining with RTX 3060, 3060 Ti. Limitations, overclocking, settings, consumption, profitability, comparison Let's look at…

6 months ago

Alphacool Eisblock Aurora Acryl GPX-A Sapphire – test: 2.8 GHz++ are not an issue

Alphacool Eisblock Aurora Acryl GPX-A (2022) with Sapphire Radeon RX 6950 XT Nitro+ Pure in…

6 months ago

Corporate Crypto Strategies 4.0: Leading with Bitcoin Expertise

In the ever-evolving landscape of business strategy, Bitcoin has emerged as a pivotal asset. With…

6 months ago

This website uses cookies.


Notice: ob_end_flush(): failed to send buffer of zlib output compression (1) in /home/gamefeve/bitcoinminershashrate.com/wp-includes/functions.php on line 5420

Notice: ob_end_flush(): failed to send buffer of zlib output compression (1) in /home/gamefeve/bitcoinminershashrate.com/wp-includes/functions.php on line 5420