Mining with RTX 3060, 3060 Ti. Limitations, overclocking, settings, consumption, profitability, comparison
Let’s look at what the RTX 3060 and RTX 3060 TI are capable of in mining cryptocurrencies using different algorithms, study the overclocking potential, optimal settings for video cards for mining, as well as profitability and consumption. An important question is what are the limitations for mining on the RTX 3060 and how to get around them.
First of all, let’s look at the comparative characteristics of video cards in the reference design, i.e. without additional overclocking and optimization.
Specifications | RTX 3060 | RTX 3060 You |
---|---|---|
Graphics Card | ||
Release Date: | Jan 12th, 2021 | Dec 1st, 2020 |
Generation: | GeForce 30 | GeForce 30 |
Graphics Processor | ||
GPU Name: | GA106 | GA104 |
Architecture: | Ampere | Ampere |
Render Config | ||
Shading Units | 3584 | 4864 |
TMUs | 112 | 152 |
ROPs | 48 | 80 |
SM Count | 28 | 38 |
Tensor Colors | 112 | 152 |
RT Cores | 28 | 38 |
L1 Cache | 128 KB (per SM) | 128 KB (per SM) |
L2 Cache | 3 MB | 4 MB |
Clock Speeds | ||
Base Clock | 1320 MHz | 1410 MHz |
Boost Clock | 1777 MHz | 1665 MHz |
Memory Clock | 1875 MHz 15 Gbps effective | 1750 MHz 14 Gbps effective |
Memory | ||
Memory Size | 12 GB | 8 GB |
Memory Type | GDDR6 | GDDR6 |
Memory Bus | 256 bit | 352 bit |
Bandwidth | 360.0 GB/s | 448.0 GB/s |
Board Design | ||
TDP | 170 W | 200 W |
Suggested PSU | 450 W | 550 W |
Power Connectors | 1x 12-pin | 1x 12-pin |
Comparison Chart 3060 vs 3060 Ti
Consider the hash rate of video cards and consumption. This table should serve as a kind of benchmark for you, i.e. your values should be plus or minus such, with a slight discrepancy of up to 3-5%. Below we will analyze how to achieve such or better results using settings, overclocking and power limitation.
RTX 3060 | RTX 3060 Ti | |||
---|---|---|---|---|
Algorithm | Hashrate | Consumption (Power) | Hashrate | Consumption (Power) |
Ethash | 37.00 Mh / s | 110.00W | 58.10 Mh / s | 130.00W |
Ethash4G | 37.00 Mh / s | 110.00W | 58.10 Mh / s | 130.00W |
Zhash | 0 h/s | 0W | 0 h/s | 0W |
CNHeavy | 0 h/s | 0W | 0 h/s | 0W |
CNGPU | 0 h/s | 0W | 2850.00 h/s | 190.00W |
CryptoNightR | 0 h/s | 0W | 0 h/s | 0W |
CNFast | 0 h/s | 0W | 0 h/s | 0W |
Aion | 250.00 h/s | 140.00W | 370.00 h/s | 190.00W |
CuckooCycle | 7.00 h/s | 140.00W | 9.80 h/s | 190.00W |
Cuckaroo (d) 29 | 0 h/s | 0W | 9.70 h/s | 190.00W |
Cuckatoo31 | 1.2 h/s | 140.00W | 0.55 h/s | 190.00W |
Cuckatoo32 | 0.45 h/s | 140.00W | 0.50 h/s | 190.00W |
Beam | 22.00 h/s | 140.00W | 32.50 h/s | 190.00W |
RandomX | 0 h/s | 0W | 0 h/s | 0W |
NeoScrypt | 0 kh / s | 0W | 0 kh / s | 0W |
Autolycos | 110.00 Mh / s | 130.00W | 155.00 Mh / s | 130.00W |
Octopus | 43.00 Mh / s | 140.00W | 48.00 Mh / s | 190.00W |
EquihashZero | 0 h/s | 0W | 0 h/s | 0W |
ZelHash | 36.00 h/s | 140.00W | 54.50 h/s | 190.00W |
KawPow | 22.00 Mh / s | 140.00W | 27.00 Mh / s | 190.00W |
ProgPow | 21.50 Mh / s | 140.00W | 26.00 Mh / s | 190.00W |
X25X | 0 Mh / s | 0W | 0 Mh / s | 0W |
MTP | 2.60 Mh / s | 140.00W | 3.90 Mh / s | 190.00W |
Verthash | 0.37 Mh / s | 130.00W | 1.19 Mh / s | 140.00W |
Difference between 3060 vs 3060 Ti
The RTX 3060 was the first card to feature NVIDIA’s mining protection. In mining, the card shows results 2 times worse than its capabilities. There are several ways to work around these restrictions:
Any of the methods should help to cope with the problem of blocking mining on the RTX 3060.
This table shows the optimal overclocking settings for each card. These values may differ depending on the vendor, power supply, drivers, manufacturer of memory chips and the graphics chip itself. On average, your metrics should be close to those in the table. We’ll talk further about the performance of specific card models and how to overclock the RTX 3060, 3060 Ti.
RTX 3060 | RTX 3060 Ti | |||||
---|---|---|---|---|---|---|
Algorithm | Core Clock (Mhz) Core frequency | Memory Clock (Mhz) Memory frequency | Power Limit (%) Food limit | Core Clock (Mhz) Core frequency | Memory Clock (Mhz) Memory frequency | Power Limit (%) Food limit |
Ethash | +0 Mhz | +1000 Mhz | 60-80% TDP | +0 Mhz | +1000 Mhz | 60-80% TDP |
Ethash4G | +0 Mhz | +1000 Mhz | 60-80% TDP | +0 Mhz | +1000 Mhz | 60-80% TDP |
Zhash | ||||||
CNHeavy | ||||||
CNGPU | +100 Mhz | +500 Mhz | 60-80% TDP | |||
CryptoNightR | ||||||
CNFast | ||||||
Aion | +100 Mhz | +500 Mhz | 60-80% TDP | +100 Mhz | +500 Mhz | 60-80% TDP |
CuckooCycle | +100 Mhz | +500 Mhz | 60-80% TDP | +100 Mhz | +500 Mhz | 60-80% TDP |
Cuckaroo (d) 29 | +100 Mhz | +500 Mhz | 60-80% TDP | |||
Cuckatoo31 | +100 Mhz | +500 Mhz | 60-80% TDP | +100 Mhz | +500 Mhz | 60-80% TDP |
Cuckatoo32 | +100 Mhz | +500 Mhz | 60-80% TDP | +100 Mhz | +500 Mhz | 60-80% TDP |
Beam | +100 Mhz | +500 Mhz | 60-80% TDP | +100 Mhz | +500 Mhz | 60-80% TDP |
RandomX | ||||||
NeoScrypt | ||||||
Autolycos | +100 Mhz | +500 Mhz | 60-80% TDP | +100 Mhz | +500 Mhz | 60-80% TDP |
Octopus | +100 Mhz | +500 Mhz | 60-80% TDP | +100 Mhz | +500 Mhz | 60-80% TDP |
EquihashZero | ||||||
ZelHash | +100 Mhz | +500 Mhz | 60-80% TDP | +100 Mhz | +500 Mhz | 60-80% TDP |
KawPow | +100 Mhz | +500 Mhz | 60-80% TDP | +100 Mhz | +500 Mhz | 60-80% TDP |
ProgPow | +100 Mhz | +500 Mhz | 60-80% TDP | +100 Mhz | +500 Mhz | 60-80% TDP |
X25X | ||||||
MTP | +100 Mhz | +500 Mhz | 60-80% TDP | +100 Mhz | +500 Mhz | 60-80% TDP |
Verthash | +100 Mhz | +500 Mhz | 60-80% TDP | +100 Mhz | +500 Mhz | 60-80% TDP |
To overclock video cards in Windows, use MSI Afterburner. This is a free graphics card overclocking utility from MSI. Download MSI Afterburner from the official website and install.
Run the program and make sure that the correct video card is selected (in case you have more than one card). If you have several identical cards, you can combine the settings for all video cards at once. Enter the “Settings” menu (gear icon) – “General” – check the box next to the “Synchronize settings of the same GPU” option.
Let’s start overclocking. If for some reason the sliders for changing frequencies and voltage are not available, go back to the “Settings” menu (gear icon) – “General” – check the box next to the “Allow video adapter control and monitoring” option.
If you mine with Nicehash, overclock your video card with Msi Afterburner, as described above.
We register in Hive OS. Using our link and the “InsidePC” promo code, you get $ 10 on your balance. Mining on Hive OS, read and study on our website.
STEP 1 – Choosing a farm. In the Farms tab, select the desired farm.
STEP 2 – Choosing a worker. We go to the desired worker (workers), in which there are 3060.
STEP 3 – Overclocking window. Each map in the barn (worker) has a speedometer icon, as well as a common speedometer icon for all maps in the barn (worker). You can overclock or tune a specific map, or all maps at once, by selecting the speedometer marked ALL. Here you can set the overclocking settings for all Nvidia or AMD cards.
STEP 4 – Overclocking or tuning… We register the overclocking values. ATTENTION !!! In Hive OS and further in Rave OS, the process of overclocking the memory clock (Memory Clock) is different from overclocking in Windows. You add frequency multiplied by 2. That is, if we need to add + 500Mhz from memory, we add 1000Mhz. Thus, we will increase the memory frequency by + 500Mhz.
If the hashrate values are far from the tabular, make sure that you set the voltage limit correctly, the card may lack voltage and it will underestimate the hashrate.
Step 5 – Save the changes. Click “Apply” to save.
First of all, register with Rave OS. We will be grateful if you register using our link, it will greatly help the development of the site. If there are difficulties with this system, mining on Rave OS, read on our website.
Step 1 – choosing a worker… Go to the Workers tab.
Step 2 – setting up the worker… We go to the settings of the worker (Edit worker).
Step 3 – overclocking and tuning… Go to the Tunning masonry. And we set the values for overclocking:
Step 4 – Save Changes… Click the “Save & Apply” button.
We take the values for overclocking and adjusting the card from the table above. These are optimal values for a good hash rate and a relatively energy efficient mode. Nobody restricts you from independently studying the limit of your card. You can increase the frequencies to increase the hashrate, or decrease the power limit to reduce consumption.
HOWEVER REMEMBER, YOU DO ACCELERATION AND DOWNVOLTING AT YOUR OWN RISK !!!
If you have unsuccessfully overclocked your graphics card, you may see one of the following signals:
Most often, you shouldn’t worry about this, this is the normal behavior of the video card when trying to find the maximum overclocking capabilities of the card. Reset the default settings, or further adjust the frequencies and power.
For the current and actual profitability in mining on RTX 3060, 3060 Ti cards, see the Whattomine website.
How to calculate energy efficiency? Divide the capacity in MH / s by the consumption W.
RTX 3060 TI is much more interesting in mining than 3060. It is more energy efficient and productive.
Consumption for 1 Mh / s is considered as dividing the consumed watts by the number of megahashes.
You can calculate this indicator for yourself, for this, divide the cost of the card by the number of megahashes.
At the moment it is Ether (ETH), Binance Pool for Ether mining is one of the most profitable and efficient pools. Read about the Binance Pool on the website.
Add to bookmarks
Mining on RTX 3070. Overclocking, tuning, profitability, consumption: If you are interested in finding more…
Mining with GTX 1660, 1660 Ti, 1660 Super. Overclocking, settings, consumption, profitability, comparisons - If…
Mining with RTX 2070 and 2070 Super. Overclocking, profitability, consumption, comparison What the RTX 2070…
Alphacool Eisblock Aurora Acryl GPX-A (2022) with Sapphire Radeon RX 6950 XT Nitro+ Pure in…
In the ever-evolving landscape of business strategy, Bitcoin has emerged as a pivotal asset. With…
Ethereum Classic (ETC) is a cryptocurrency and blockchain platform, a fork of Ethereum, which also…
This website uses cookies.