How to ‘increase/ Max/ Optimize’ AMD RX 580 4GB Mining: Overclocking | Drivers | Hashrate | Profitability Rave Coins (RVN) – The AMD RX 580 4GB graphics card is great for mining. Next, we will select the optimal overclocking parameters for mining with AMD RX 580 4GB. Let’s find out which drivers to use the most correctly and efficiently. Let’s look at the main characteristics and measure the hash rate for popular algorithms.
AMD RX 580 4GB was released on April 18, 2017. Average power consumption is 140.0W. The maximum allowable temperature of the graphics chip is 90 ° C
The current market price and profitability of the AMD RX 580 4GB video card in mining fluctuates depending on the value of the cryptocurrency. The information in the plate is updated once a day.
View the complete GPU profitability table sorted by price, revenue, and ROI.
Price | ETH | ETC | EXP | UBQ | RVN | BEAM | Profit | Payback |
---|---|---|---|---|---|---|---|---|
25 512.62 ₽ | 0.0 Mh / s | 32.2 Mh / s | 32.2 Mh / s | 32.2 Mh / s | 14.0 Mh / s | 13.5 H / s | 3060.32 ₽ ( RVN – Convert To home Currency for accurracy) | 258 days |
We have compiled an AMD RX 580 4GB hashrate table for popular algorithms. If you are just choosing a video card for mining , and you already know what kind of coin you will mine, then you can estimate the approximate performance from the table. We also have an article on what a hash rate is .
Coin | Algorithm | Hashrate |
---|---|---|
Ethereum Classic (ETC) | Etchash | 32.2 MH / S |
Expanse (EXP) | DaggerHashimoto EXP | 32.2 MH / S |
Ubiq (UBQ) | Ubqhash | 32.2 MH / S |
Monero (XMR) | RandomX | 470.0 H / S |
Ravencoin (RVN) | KawPow | 14.0 MH / S |
Beam (BEAM) | BeamHashIII | 13.5 H / S |
When installing AMD RX 580 4GB drivers, it is always recommended to uninstall the current drivers first. This way you can be sure that the DCH drivers will not be installed by Windows 10.
For older AMD graphics cards (such as AMD R9 290 or AMD HD 7870) the Catalyst (Crimson) 15.12 driver may show the best performance and compatibility
For other video cards, the latest driver version from the official website of the AMD manufacturer is best suited .
We will overclock AMD RX 580 4GB for mining using MSI Afterburner. You can find it in Yandex. The program interface is very simple, albeit a little colorful) To overclock the video card, we need two sliders:
You need to change the frequency values a little. Then test the stability of the work. If all is well, then we increase the frequency even more. If the video card starts to malfunction or the driver crashes, then we just reduce the frequency and that’s it. There will be no harm. Next, we will look at the overclocking parameters for popular algorithms.
Details | Hashrate | Program | CoreMemoryPower |
---|---|---|---|
ASUS RX 580 OC 4GB • Vladimir | 9.3 MH / s – 13.2 MH / s (+3.9)KawPow RVN | AMD Radeon Software | 10001955one hundred% |
Rx 580 4gb Saphire Nitro + • Danila | 29.1 MH / s – 32.6 MH / s (+3.5)DaggerHashimoto ETH | MSI Afterburner | 12002150-eight% |
sapphire rx 580 nitro + 4gb • Paganka | 21.0 MH / s – 31.0 MH / s (+10.0)Ethash ETC | OverdriveNtool | 112021100% |
HIS RX 580 IceQx2 • Skipper | 11.2 MH / s – 15.25 MH / s (+4.1)KawPow RVN | OverdriveNtool | 110021350% |
Radeon RX 580 4096 MB ASUS Elpida Eugene | 11.0 MH / s – 14.6 MH / s (+3.6)KawPow RVN | Miner Settings | 110019500% |
Sapphire nitro rx580 4gb • Anton | 12.0 MH / s – 14.5 MH / s (+2.5)KawPow RVN | MSI Afterburner | -1502500% |
In today’s video we get our hands on a XFX AMD Radeon RX580 8GB GTX XXX OC Edition Graphics Card! I am super excited to finally putting attention back on my RX580 Mining Rig, especially now that Ethereum Mining is so profitable. Enjoy today’s video were we go over RX580 Stock & OverClock Settings, Ethereum Mining, Ravencoin, Ethereum Classic & Ravencoin with the RX580.
A few years ago, the main buyers of top-end video cards were computer game players. But today cryptocurrency miners are actively entering this sector, who use the large computing power of the latest generation devices to execute blockchain algorithms. AMD’s RX 500 series immediately caught the attention of miners with its high performance. Let’s take a look at mining on RX 580: what opportunities does the older model in the series have and whether it is possible to increase its profitability.
The main indicators in demand in mining are the processor frequency and the amount and frequency of RAM. Let’s see how well AMD 580 can provide efficient mining according to these indicators:
Different currencies are based on different algorithms, therefore, the requirements for the quality of the card may differ. For example, let’s take the amount of memory. This indicator is not particularly important for miners of Etherium, Zcash and similar coins, since their algorithm is more sensitive to the memory frequency. But in the future, it is possible to optimize the algorithms, in addition, the DAG file grows too quickly for ETH, which can make cards with a small memory size not relevant in 1 – 1.5 years.
It’s also worth mentioning that stock settings never promised high mining results. Overclocking the RX 580 for mining is the most exciting moment with the highest expectations. Acceleration correctly can raise frequencies by a quarter. But the success of overclocking depends largely on the specific board. This is due to the use of memory chips from various manufacturers (Micron, Samsung, Hynix and others). The capabilities of the cooling system also change, which also affects the stability of the device during overclocking.
The best overclocking results are shown by cards with Samsung memory, for example Sapphire RX 580, and mining with such a device will bring good money. But Samsung memory cards are in short supply, and it is rather difficult to acquire them. Memory from other manufacturers is much less resistant to drawdown and does not provide full overclocking efficiency.
It is impossible to expect good mining profitability from any video card in the “buy-put” mode. RX 580 is no exception. As a standard, the card provides the following indicators according to the most popular algorithms:
Naturally, these results come from a non-flashed card with factory software. If we use AMD Radeon Software Crimson ReLive Edition Beta for Blockchain drivers for RX 580 mining, we can expect a performance increase of 1-2 MH / s immediately. But a full-fledged increase in profitability can be obtained only after flashing and manually adjusting the overclocking of the card.
In an economic sense, the use of an overclocked and flashed AMD Radeon RX 580 in mining brings the following results:
The latter option allows you to recoup the purchase of a card of $ 500 in 15 months with a little
AMD, having released a reference card, also supplies the market with chips, on the basis of which other manufacturers release their versions of RX 580 devices. The differences are in the cooling system, type and manufacturer of memory, stock frequencies (minor) and design. Here are some options:
The abundance of card models does not allow us to tell about each one. Fortunately, calculator programs can come to the rescue. They allow you to compare different models and suggest their effectiveness in extracting currency.
So, the decision to mine has been made, the card has been purchased and installed on board a PC or farm. In order for the setup of RX 580 for mining to be complete and easy, you need to understand the purpose of the operations performed and prepare everything you need.
Overclocking is an increase in the frequency of the memory and the processor of the card. To achieve this, you will also have to manually adjust the memory timings, otherwise the work efficiency will be insufficient. To work, you need the following set of programs:
Having installed all the necessary software packages, let’s get to work.
If the RX 580 firmware for mining was performed with an error and the card stopped working, you can always return it to its original state by uploading the stock BIOS into it. This file can be saved in ATI Flash before starting work. And if you forgot to do this, it remains possible to download the factory BIOS from the manufacturer’s website.
The algorithm used to flash the RX 580 for mining is not overly complicated. But you need to do everything in order, without skipping stages. It is also important to remember that all actions must be performed as an administrator. Here is the procedure:
Don’t be discouraged if you didn’t succeed on the first try. Timing selection is a tedious and time-consuming business, which may require 2-3, or maybe 5-10 tests. But the resulting increase in productivity will more than pay off all the effort and time.
After the timings are changed, it’s time to overclock the card. First of all, it is worth deciding which parameters need to be overclocked to extract the selected currency? Here are some examples:
The extraction of other coins is associated with its own subtleties, they can be found in thematic articles or on the forums.
You can check the effectiveness of each set of settings by observing how the miner works. If during operation there are no wrong balls and the system does not give error messages, you can change the parameters a little more. If it is noticeable that the hash rate has gone down, it is worth returning the parameters back. So, through trial and error, you will be able to find the optimal settings.
The senior card of the 500th line shows good results. However, the high cost of the device itself makes one think about economic feasibility. Considering how much even the top-end nitro 580 video card brings in mining, it will not be possible to recoup the investment even in a year. Fluctuations in coin rates and card prices make it difficult to forecast for such a long time.
Therefore, the question of whether it is worth investing in expensive cards or you can find something cheaper, each of the miners must decide for themselves in accordance with their preferences and the situation on the card market in their city. If you can get the RX 580 for a reasonable price – buy it, no – look for another option.
Mining on RTX 3070. Overclocking, tuning, profitability, consumption: If you are interested in finding more…
Mining with GTX 1660, 1660 Ti, 1660 Super. Overclocking, settings, consumption, profitability, comparisons - If…
Mining with RTX 2070 and 2070 Super. Overclocking, profitability, consumption, comparison What the RTX 2070…
Mining with RTX 3060, 3060 Ti. Limitations, overclocking, settings, consumption, profitability, comparison Let's look at…
Alphacool Eisblock Aurora Acryl GPX-A (2022) with Sapphire Radeon RX 6950 XT Nitro+ Pure in…
In the ever-evolving landscape of business strategy, Bitcoin has emerged as a pivotal asset. With…
This website uses cookies.