How to increase AMD RX 580 4GB Mining: Overclocking | Drivers | Hashrate (RVN)

How to ‘increase/ Max/ Optimize’ AMD RX 580 4GB Mining: Overclocking | Drivers | Hashrate | Profitability Rave Coins (RVN) – The AMD RX 580 4GB graphics card is great for mining. Next, we will select the optimal overclocking parameters for mining with AMD RX 580 4GB. Let’s find out which drivers to use the most correctly and efficiently. Let’s look at the main characteristics and measure the hash rate for popular algorithms.

How to increase AMD RX 580 4GB Mining: Specifications

AMD RX 580 4GB was released on April 18, 2017. Average power consumption is 140.0W. The maximum allowable temperature of the graphics chip is 90 ° C

AMD RX 580 4GB Yield -Profitability ( Raven coin)

The current market price and profitability of the AMD RX 580 4GB video card in mining fluctuates depending on the value of the cryptocurrency. The information in the plate is updated once a day.

View the complete GPU profitability table sorted by price, revenue, and ROI.

How to Maximize: Hashrate AMD RX 580 4GB

We have compiled an AMD RX 580 4GB hashrate table for popular algorithms. If you are just choosing a video card for mining , and you already know what kind of coin you will mine, then you can estimate the approximate performance from the table. We also have an article on what a hash rate is .

AMD RX 580 4GB Driver

When installing AMD RX 580 4GB drivers, it is always recommended to uninstall the current drivers first. This way you can be sure that the DCH drivers will not be installed by Windows 10.

For older AMD graphics cards (such as AMD R9 290 or AMD HD 7870) the Catalyst (Crimson) 15.12 driver   may show the best performance and compatibility

For other video cards, the latest driver version from the official website of the AMD manufacturer is best suited  .

How To Optimize: Overclocking AMD RX 580 4GB for Mining

We will overclock AMD RX 580 4GB for mining using MSI Afterburner. You can find it in Yandex. The program interface is very simple, albeit a little colorful) To overclock the video card, we need two sliders:

• Core Clock – overclocking by the core, increases the core frequency;
• Memory Clock – memory overclocking, increases the memory frequency;
• Power Limit – allows you to increase or decrease the power consumption of the video card.

You need to change the frequency values ​​a little. Then test the stability of the work. If all is well, then we increase the frequency even more. If the video card starts to malfunction or the driver crashes, then we just reduce the frequency and that’s it. There will be no harm. Next, we will look at the overclocking parameters for popular algorithms.

Examples of overclocking AMD RX 580 4GB for mining from miners

RX580 Mining Hashrate, Overclock Settings & Profitability

In today’s video we get our hands on a XFX AMD Radeon RX580 8GB GTX XXX OC Edition Graphics Card! I am super excited to finally putting attention back on my RX580 Mining Rig, especially now that Ethereum Mining is so profitable. Enjoy today’s video were we go over RX580 Stock & OverClock Settings, Ethereum Mining, Ravencoin, Ethereum Classic & Ravencoin with the RX580.

How to mine with the best value on AMD RX 580 card?

A few years ago, the main buyers of top-end video cards were computer game players. But today cryptocurrency miners are actively entering this sector, who use the large computing power of the latest generation devices to execute blockchain algorithms. AMD’s RX 500 series immediately caught the attention of miners with its high performance. Let’s take a look at mining on RX 580: what opportunities does the older model in the series have and whether it is possible to increase its profitability.

Features and specifications of video cards for mining

The main indicators in demand in mining are the processor frequency and the amount and frequency of RAM. Let’s see how well AMD 580 can provide efficient mining according to these indicators:

• GPU frequency. The card uses a Polaris chip, the same as on the 480 and 570 models. The core frequency has been slightly increased, now its stock value is 1257 MHz, in the “Boost” mode it reaches 1340 MHz.
• The amount of RAM. The RX 580 card is available in both 4 Gb and 8 Gb, which guarantees that it will not lose its relevance for several more years.
• The frequency of the video memory is from 1750 MHz, which, in combination with the 256-bit capacity, promises good results.
• Energy consumption. For the increased performance of the model relative to the “younger sisters” had to pay with the increased value of power consumption. Consumption of 185W is foreseen by factory settings which makes one think about economic efficiency of purchasing this card.

Different currencies are based on different algorithms, therefore, the requirements for the quality of the card may differ. For example, let’s take the amount of memory. This indicator is not particularly important for miners of Etherium, Zcash and similar coins, since their algorithm is more sensitive to the memory frequency. But in the future, it is possible to optimize the algorithms, in addition, the DAG file grows too quickly for ETH, which can make cards with a small memory size not relevant in 1 – 1.5 years.

It’s also worth mentioning that stock settings never promised high mining results. Overclocking the RX 580 for mining is the most exciting moment with the highest expectations. Acceleration correctly can raise frequencies by a quarter. But the success of overclocking depends largely on the specific board. This is due to the use of memory chips from various manufacturers (Micron, Samsung, Hynix and others). The capabilities of the cooling system also change, which also affects the stability of the device during overclocking.

The best overclocking results are shown by cards with Samsung memory, for example Sapphire RX 580, and mining with such a device will bring good money. But Samsung memory cards are in short supply, and it is rather difficult to acquire them. Memory from other manufacturers is much less resistant to drawdown and does not provide full overclocking efficiency.

Profitability from mining with RX 580 video cards and drivers

It is impossible to expect good mining profitability from any video card in the “buy-put” mode. RX 580 is no exception. As a standard, the card provides the following indicators according to the most popular algorithms:

• Equihash (Zcash, Komodo) – 302-310 SOL/s.
• X11gost (Dash, Pura, Boolbery) – 8.4-8.6 MH/s.
• Daggerhashimoto (Etherium, Soilcoin, Pirl) – 26.1-26.8 MH/s.
• Pascal (PASC, PASL) – 0.85 GH / s.

Naturally, these results come from a non-flashed card with factory software. If we use AMD Radeon Software Crimson ReLive Edition Beta for Blockchain drivers for RX 580 mining, we can expect a performance increase of 1-2 MH / s immediately. But a full-fledged increase in profitability can be obtained only after flashing and manually adjusting the overclocking of the card.

In an economic sense, the use of an overclocked and flashed AMD Radeon RX 580 in mining brings the following results:

• Ether can be mined with a hash rate of 30 MH / s, while the modern ether exchange rate and the cost of electricity will give a monthly income equal to approximately 31 USD.
• Mining Zcash is less profitable: income hovers around the $ 20 mark per month.
• Dual mining is more profitable. As an example, we looked at mining Decret in parallel with mining ETH. It turned out that the hash rate during mining practically does not sag. The card issues 29 MH / s for ETH and 850-900 H / s for DCR. At the current rates of these tokens, the monthly yield is slightly more than $ 32.

The latter option allows you to recoup the purchase of a card of $ 500 in 15 months with a little

Major versions of the map

AMD, having released a reference card, also supplies the market with chips, on the basis of which other manufacturers release their versions of RX 580 devices. The differences are in the cooling system, type and manufacturer of memory, stock frequencies (minor) and design. Here are some options:

• Gigabyte’s RX 580 boards come with 8 Gb and are attractive for mining due to the frequency response of 1411/2000 MHz (AMD Radeon RX 580 gaming). The AORUS Extreme Edition claims an even higher core frequency of 1439 MHz.
• The Sapphire RX 580 Nitro 4 Gb card is less suitable for mining due to the small amount of memory and its artificially lowered frequencies (the model is larger for games). But high-quality cooling allows you to get stable operation in an overclocked state. Sapphire Pulse Radeon RX 580 with 8 Gb of memory overclocks better and provides a good hash rate.

The abundance of card models does not allow us to tell about each one. Fortunately, calculator programs can come to the rescue. They allow you to compare different models and suggest their effectiveness in extracting currency.

The procedure for installing video cards and drivers for mining

So, the decision to mine has been made, the card has been purchased and installed on board a PC or farm. In order for the setup of RX 580 for mining to be complete and easy, you need to understand the purpose of the operations performed and prepare everything you need.

Overclocking is an increase in the frequency of the memory and the processor of the card. To achieve this, you will also have to manually adjust the memory timings, otherwise the work efficiency will be insufficient. To work, you need the following set of programs:

• We need MSI Afterburner to correct the core frequency and memory performance. In addition, this software package can regulate the voltage supply, and therefore, influence the power consumption of the device.
• ATI This package is needed in order to flash a video card with a modified BIOS file.
• Polaris BIOS Editor. This tool is needed to edit the BIOS file and set timings.

Having installed all the necessary software packages, let’s get to work.

If the RX 580 firmware for mining was performed with an error and the card stopped working, you can always return it to its original state by uploading the stock BIOS into it. This file can be saved in ATI Flash before starting work. And if you forgot to do this, it remains possible to download the factory BIOS from the manufacturer’s website.

 How to flash a video card and driver for mining

The algorithm used to flash the RX 580 for mining is not overly complicated. But you need to do everything in order, without skipping stages. It is also important to remember that all actions must be performed as an administrator. Here is the procedure:

• Launch ATI Flash, save the BIOS file. If necessary, make a backup copy.
• Open the resulting file using Polaris BIOS Editor. On the right side, change the Timing Strap parameters. The selection should start with 1500, increasing or decreasing them depending on the behavior of the system.
• We save the changes and sew the converted file using ATI Flash into the card.

Don’t be discouraged if you didn’t succeed on the first try. Timing selection is a tedious and time-consuming business, which may require 2-3, or maybe 5-10 tests. But the resulting increase in productivity will more than pay off all the effort and time.

Setting up overclocking the video card

After the timings are changed, it’s time to overclock the card. First of all, it is worth deciding which parameters need to be overclocked to extract the selected currency? Here are some examples:

• Ethereum mining is entirely tied to the speed of memory. Therefore, in MSI Afterburner, the RX 580 setting for ether mining is performed as follows: move only the slider to the right that is responsible for the RAM frequency. You shouldn’t increase the GPU frequency and power supply characteristics, you can even lower them to reduce electricity consumption.
• Zcash mining is primarily related to the core frequency. Therefore, we increase this value until the card works stably. You do not need to change the frequency of the RAM, but the voltage can be lowered (however, make sure that the hash rate does not drop).

The extraction of other coins is associated with its own subtleties, they can be found in thematic articles or on the forums.

You can check the effectiveness of each set of settings by observing how the miner works. If during operation there are no wrong balls and the system does not give error messages, you can change the parameters a little more. If it is noticeable that the hash rate has gone down, it is worth returning the parameters back. So, through trial and error, you will be able to find the optimal settings.

How to overclock a video card for mining: results

The senior card of the 500th line shows good results. However, the high cost of the device itself makes one think about economic feasibility. Considering how much even the top-end nitro 580 video card brings in mining, it will not be possible to recoup the investment even in a year. Fluctuations in coin rates and card prices make it difficult to forecast for such a long time.

Therefore, the question of whether it is worth investing in expensive cards or you can find something cheaper, each of the miners must decide for themselves in accordance with their preferences and the situation on the card market in their city. If you can get the RX 580 for a reasonable price – buy it, no – look for another option.

Related posts:

How to overclock a graphics card in a laptop: MSI Afterburner – AMD & NVIDIA I7 4770K (OC) with RX 5700 XT: Hashate | |overclocking | Benchmark | 8 Games HD Red Dead Redemption 2: Overclocked FX 8350 and RX 5700 XT in FULL HD resolution AMD Radeon RX 6700 XT Mining: Hashrate | overclocking| Settings | Power Consumption How to increase: RTX 2060 vs 2060 Super Mining- Overclocking | HiveOS | Rave OS GTX 1080 Ti VS 1080 Mining: Overclocking | Profitability (Ether) | Power consumption