Radeon RX 580 (8G) Miners Hashrate: Best and Most Profit 2021 ( Video Card)

What to mine on AMD RX 580, the choice of the algorithm

For the RX 580, ether mining is the most profitable. This algorithm will be the most profitable for its owner. At the factory parameters, the card outputs 22 Mh / s. But if you flash the BIOS and overclock it, you can achieve a result of 32 Mh / s.

The latest versions of the Phoenix miner   allow you to overclock AMD cards up to 30-32 Mh / s on native firmware. To do this, in the clay, you need to correctly select the numerical value of  –strap and –rxboost , as well as set the  –cclock / -mclock parameters , and in the phoenix write  -mt (0 – default VBIOS values; 1 – faster timings; 2 – fastest timings) . These options modify the timings on the fly, and after closing the miner, the BIOS is rolled back to the factory settings. An alternative to the phoenix miner is the latest release of the Theamredminer application, but the program is very specific and can malfunction on Ethash. But it works great on KawPow and CryptoNightHaven.

RVN mining brings good income, but the cards get very hot. If it is winter outside, you can just open the window, but in the summer it is almost impossible to work at KawPow. The Haven coin has seriously added to the price. Previously, it was mined using the SRBMiner or XMrig apps, but the fastest is the red miner. Download Theamredminer 07.19 and your RX 580 will give 1Kh / s to CryptoNightHaven. This miner supports a number of algorithms and is able to overclock Vega series cards, but RX 580 needs Bios modification, then you will get the maximum hash rate. An example of a batch file:

@echo off

set GPU_MAX_ALLOC_PERCENT = 100

set GPU_SINGLE_ALLOC_PERCENT = 100

set GPU_MAX_HEAP_SIZE = 100

set GPU_USE_SYNC_OBJECTS = 1

teamredminer.exe -a cn_haven -o Pool address -u Wallet -p password

pause

The Haven wallet address can be found on the exchange https://tradeogre.com/ .

You can find out what is better to mine on RX 580 using special resources that constantly monitor the most profitable coins. The Wattomine and  Coincalculators website provide a simple interface where all the current coins are located.

Basic algorithms for mining:

• Ethhash  (Etc, Eth, Ubiq, Nicehash)
• HavenProtocol (CryptoNightHaven);
• Ravencoin (KawPow);
• Beam (BeamHashIII);
• Veil-ProgPow (ProgPow);
• BitTubeCash (CuckooCycle)

The cryptocurrency market is constantly changing, because of this, most miners are looking for the most profitable algorithm for mining. You can find information about the release of new coins on the Bitcointalk forum .Over the past few months, most miners have been mining  Ethereum (ETH) and Ethereum Classic (ETC) , the QuarkChain (QKC) project came out relatively recently, but shows good profitability in relation to other coins.

In mining, the calculation speed indicators and the number of shares sent to the pool are denoted in one word – hash rate. But, these are completely different concepts and should not be confused. In the miner window, the hash rate is always more or less stable, and the hash rate of your farm on the pool can fluctuate significantly. It is necessary to focus not on the current indicators, but on the average value per day.

However, sometimes, when mining, the hash rate can drop below 23 MH / s. Especially if your memory is not from Hynix. This problem occurs in the RX 580 Nitro graphics cards. Initially, the video card is more suitable for gamers and not for miners.

Most users use Nicehash software  . After installing and configuring, the program itself finds the most profitable algorithm and mines it, the payment is made to your BTC wallet, but in the updated version you can earn money with other crypto coins.