Categories: News

The expert said that it is possible to repair the Nord Streams without any problems

MOSCOW, 28 Sep — PRIME. Incidents with a gas leak from the Nord Stream and Nord Stream 2 pipelines are quite an ordinary situation from a technical point of view, damaged sections can be replaced without problems after the gas burnout ends and the pipes become safe for specialists, the honored rescuer told RIA Novosti Russian Federation, former head of the Russian Rescue Training Center Alexander Gofshtein.

The expert called the sabotage at Nord Stream 2 expected

On Monday, Nord Stream 2 AG reported that on one of the lines of Nord Stream 2 (it was filled with technical gas after construction), an emergency occurred in Danish waters near the island of Bornholm, accompanied by a sharp drop in pressure. The reasons are unknown, an investigation is underway, the company specified. Then Nord Stream AG, the operator of Nord Stream, reported on the pressure drop on both lines. The reasons are also unknown.

According to Gofshtein, in the event of large-scale incidents on gas pipelines, all versions should always be considered, including technological errors and sabotage.

“I’m more inclined to the version of a technological malfunction – cracks, gusts, landslides. Everything that can lead to the fact that the pipe gives a gap, a leak. Later, a leak due to friction causes a spark, and then an explosion or burning, which is almost identical,” the expert said.

He noted that any reason for what happened will be accompanied by large losses of gas. The blue fuel itself in the pipe “from valve to valve” is at a great distance, and the gas is under high pressure.

When the process of gas release is over, and the pipe has cooled down, it will be possible to begin to eliminate the consequences of the emergency. Difficulties in this, according to him, will not be.

“The damaged section of the pipe is cut out, a new one is inserted, purged, filled with gas – and everything works. On gas pipelines, this (leakage) is an ordinary situation … all this is provided for, there is even a special repair kit,” Gofshtein added.

“Until the pipe is released, it will all burn out. There is no other way: shutting off the valves and burning out the gas. These are always big losses. Even the restoration of the pipe is not as difficult as the very fact of burnout losses,” he stressed.

Gofshtein concluded that until all the gas is completely burnt out, it will not be possible to start eliminating the consequences of the accident. The piece of pipe cannot be replaced until everything cools down.

Miners Hashrate

Recent Posts

Mining RTX 3070 at NiceHash: Overclocking, tuning, profitability, consumption

Mining on RTX 3070. Overclocking, tuning, profitability, consumption: If you are interested in finding more…

6 months ago

Mining GTX 1660, 1660 Ti, 1660 Super: Overclocking, settings, consumption

Mining with GTX 1660, 1660 Ti, 1660 Super. Overclocking, settings, consumption, profitability, comparisons - If…

6 months ago

Mining RTX 2070 and 2070 Super: Overclocking, profitability, consumption

Mining with RTX 2070 and 2070 Super. Overclocking, profitability, consumption, comparison What the RTX 2070…

6 months ago

Mining with RTX 3060, 3060 Ti. Limitations, overclocking, settings, consumption

Mining with RTX 3060, 3060 Ti. Limitations, overclocking, settings, consumption, profitability, comparison Let's look at…

6 months ago

Alphacool Eisblock Aurora Acryl GPX-A Sapphire – test: 2.8 GHz++ are not an issue

Alphacool Eisblock Aurora Acryl GPX-A (2022) with Sapphire Radeon RX 6950 XT Nitro+ Pure in…

6 months ago

Corporate Crypto Strategies 4.0: Leading with Bitcoin Expertise

In the ever-evolving landscape of business strategy, Bitcoin has emerged as a pivotal asset. With…

6 months ago

This website uses cookies.


Notice: ob_end_flush(): failed to send buffer of zlib output compression (1) in /home/gamefeve/bitcoinminershashrate.com/wp-includes/functions.php on line 5420

Notice: ob_end_flush(): failed to send buffer of zlib output compression (1) in /home/gamefeve/bitcoinminershashrate.com/wp-includes/functions.php on line 5420