Other algorithms for mining – Radeon RX 580
Other algorithms for this card are rarely used, but they can benefit in one day. A popular algorithm Zcash (snake) is a speed issue of 300-320 s / sec. The CryptoNight algorithm (Monero XMR) will result in 600 H / sec. LBC offers 0.165 GHS.
Pascal (PASC) will produce at 0.86 GH / s and X11Ghost (SIB) will emit 8.5 MH / sec.
There is no need to manually monitor the cost and complexity of each currency. If you are using the latest version of the miner, the program will automatically start working with the algorithm that started profiting. To do this, you only need to make a benchmark.
It will show you what kind of speed will generate a certain currency from the list of users.
Overclocking and firmware RX 580
The acceleration of the device follows the same principle as other GPUs. To do this, we need the MSI avtoberner program (Strength).
The frequency varies in a particular currency. For example, if Mene Ether, then we only need overclocking RAM because only the power is determined by the speed of the memory. This means that the core frequency can be reduced. Therefore, the card will become “cold” while consumption declines. The temperature, which will remain close to 65-68 degrees, will allow the device to serve for longer periods of time.
If we extract Zcash, it all turns out to be the opposite – we need to raise the core frequency and the memory can stay at the base level.
How to increase or decrease the frequency should be done carefully. In both cases, too much can cause balls and errors that are not working correctly on the GPU. If the user doesn’t know what to do, it’s best to follow the instructions.
The video below shows how to make the best acceleration RX580 firmware and other mining 8GB and 4GD bring a speed of no less than 30 MH / s.
So, simply unforgettable updates to the driver. AMD has released a special driver mining optimization. The latest version can be downloaded from the official website by clicking on some of the drivers.
