Because the card itself reveals mining – RX580
The Radeon RX 580 on Mina is not because it may be easy to see at first glance. In the mining revenge, the productivity of the graphics card does not exceed 24-25 MH in fact / sec, even in the overclocked version. However, the chart stipulates that the potential is much greater, and in order to get the best profit, an additional configuration of the RX 580 is required.
The whole essence of the map setup is its own BIOS change to the BIOS modified video memory timing. As a rule, Samsung’s memory and other aspects have quite good timing, in fact, after its dissolution can provide value for heshreyta around 30 megahesh.
However, such a highly independent implementation of other memory manufacturers, as a rule, is not, so we need the ATIWinflash and PolarisBiosEditor programs, through which we modify the card to be more suitable for the timing of mine methyl ether, so that we can get higher Heshreyt. How exactly do this in detail, we won’t tell because it’s the subject of another great article that doesn’t fit the current format.
Instead, we provide you with a detailed and very accessible BIOS end video in this article that describes the process of modifying the card. However, reminisce about splicing your card, you are responsible for her safety, and its performance is not 100% guaranteed that you can’t give it. Read the timing carefully, right after your video RAM (Mega, Hynix, Elpida), and then proceed to modify the process.
As we have already said, now the RX 580 is the most profitable to see cryptocurrency revenge on the Ethash algorithm on the modified card to be able to provide 30 MH / sec plus. However, as time goes by, the market situation is constantly changing, and what is profitable today may not be tomorrow. So we present you with a list of other popular algorithms and RX 580 results in their app:
- Equihash – 290 H / S;
- CryptoNight – 690 H / S;
- X11Gost – 6.9 MH / sec;
- Blake2b – 990 MH / sec;
- LBRY – 135Mh / sec;
- Lyra2RE – 5700 Kh / s;
- NeoScrypt – 650 Kh / sec;
- Blake14r – 1350 MH / sec.
Also, when it comes to the topic of very popular mining on the RX 5808 grams, become a dual mining ether and Decrod coin. Previously, this was very profitable because, in fact, it was possible to produce two coins at the same time and increase power consumption only for the card, while heshreyt almost fell on ether. However, now we are starting to have the Decred algorithm ASIC system, and similar mining is no longer so attractive. It is also necessary to consider the behavior in this mode in different ways, sometimes different maps, for example, the results from the MSI RX 580 armor are overall slightly worse than the sapphire RX 580 nitro.
Mining is easy because it is a game accelerator card. In this process, it is best to use the well-known MSI afterburner program. However, the specificity of mining acceleration is somewhat different from what we usually do. Usually, everything is always a bit overclocked with the core and video memory, but we have such a path that is not very suitable. The fact that different algorithms use core and memory cards in different ways. The speed of mining as well as boosting the overclocking kernel and other cores is actually not involved, but requires very high speed video memory.
The universally set Radeon RX 580 Mining Ether – is your memory card that accelerates and reduces the maximum core speed. Since the ethero Bustoasi can only be remembered, it allows miners to reduce power consumption by reducing core power and make the map colder. On the other hand, if you decide, that is, Zetkesh, you, on the contrary, have the most improved core frequency and video memory can stay at the base value. In this case, the reduction in food should be carefully approached because it directly affects the performance of the algorithm’s graphics card.
How to give you those or other accelerometer cards, you don’t say anything without a calculator, for this you need to try yourself and choose the best settings. Very useful after the first attempt to closely monitor the miner stability program, if the ball or error is often generated incorrectly, then perhaps your card pererazognana or lack of power, it is worth a little increase the paver limit. If the experiment itself does not have the time or the will, you can try to apply for settings that are used by others. It’s not true, of course, they fit your needs, or you’re just an example, but now on the Internet, especially on YouTube, you can find quite a few examples of overclocking success.
For example, we overclocked Ethernet 29 and Decree 900 into possible settings: core on 1200 MHz and 2100 MHz memory.
