How to perform firmware installation on Galaxy M62 with ODIN

In this article, you will learn how to perform firmware installation on Galaxy M62 with ODIN. The Samsung Galaxy M62 comes with Android 11 out of the box with a 3.0 UI skin. As with any other Android device, you can install several custom ROMs on the Galaxy M62.

A ROM drastically changes the way your phone looks and feels and can improve battery life in some cases. While custom firmware is a good thing to have, sometimes you may need to go back to the official or stock ROM as you wish, for a variety of reasons.

For example, a custom ROM might cause some unexpected problems and sometimes it can even freeze your phone completely (by installing the wrong firmware). In any case, it is always good to know how to perform firmware installation on Galaxy M62 with ODIN.

Why install firmware on Galaxy M62 with ODIN

• Phone locked: when users install a ROM or mod not designed for their phone model, they lock the phones. When a phone freezes, it initiates a boot cycle that a factory reset cannot resolve.
• Install the official firmware: if you’ve tweaked the current firmware or installed various mods, installing firmware on the Galaxy M62 is a good way to get your phone back to how it was when it left the factory. The new firmware will overwrite the old one and reset everything.

Prerequisites

• Go to Settings> About phone> Software information. Quickly tap 7 times on Build number to enable the Developer options.
• Go up Settings> Developer options and touch Debug USB. This will allow the phone to communicate with the computer to install the new firmware.
• Go up Settings> Developer options and enable OEM unlocking.
• Make sure you have at least 60% battery charge. If your phone freezes during the installation process, it will not shut down.
• Download the latest Samsung USB drivers for the Galaxy M62 (Download)

Download

How to install a firmware on the Galaxy M62 with ODIN

1. Make sure you download both the ODIN flashing tool and Galaxy M62 stock firmware from the download links above and extract both packages.
2. Launch the extracted ODIN file.
3. Turn off your phone and go in download mode. To do this, press and hold the buttons at the same time reduction of volume and power.
4. Connect your phone to your computer using the supplied USB cable. If the USB drivers are installed correctly, check the box ID: COM in ODIN it will turn blue.
5. Click the button AP / PDA and select the extracted firmware button.
6. Go up Options and be sure to disable Re-Partition and enable the automatic restart e F.
7. Click the button Start and wait for the firmware to be installed on your Galaxy M62.

Once the installation process is finished, ODIN will show a green “PASS” text with the time needed to install the firmware. The phone will automatically reboot a few times before booting. When the phone boots for the last time, it will run the newly installed stock firmware. If you have any questions, please let us know below.