Categories: How to

How to Quickly Charge the Battery of an Android? – The Best Tricks

How to Quickly Charge the Battery of an Android? – The Best Tricks

Surely many of us have experienced that moment in which, when we leave home, our mobile battery is at 100% and very shortly afterwards at less than 10%. Also, when we recharge it it takes several hours to complete, and you need it to do it quickly, therefore users have discovered new tricks that will help you with this problem.

However, you should also take into account that for these tricks to be useful to you, your battery must be in good condition, since this could also be the main problem.

What is the fastest way to charge the battery of an Android device?

Generally, lexperts on the subject recommend keeping mobile batteries in a range between 20% and 80% to help extend the useful life of these. Thanks to the arrival of new materials for the batteries of this novel technology in fast wireless charging in cell phones, the batteries are made of lithium ions as a substitute for nickel.

However, even with these technological innovations, it is never usually enough when using the mobile for a long time, therefore, below, we will show you some tricks to charge your mobile faster.

Turning off the screen

This is one of the main recommendations they make when looking for a way to charge your mobile battery faster. It simply consists of leave your mobile asleep without turning on the screen since it is one of the main sources of energy consumption.

Therefore, at the moment in which the mobile is connected, as long as you keep the screen off the charging process will be faster and effective.

Deactivate the internet connection, Bluetooth and your data

When charging our battery, if we keep the wireless connections turned on, whether they are internet, Bluetooth or mobile data, the mobile will be working at all times searching and connecting to these networks. This means that even if you are not using it, it will continue to work, thus making the battery charge progress slowly.

Therefore, if you want your battery to charge faster or avoid depleting its charge in less time, you just have to deactivate the aforementioned wireless connections.

Put your cell phone in airplane mode

Another widely used method, both for your phone to charge quickly and to prevent it from downloading in a short time, is using the ‘Airplane Mode’ tool. This tool deactivates all wireless or battery-consuming connections, such as Wi-Fi, Bluetooth, mobile data and coverage, making them stop consuming your mobile battery.

However, you should take into account that, When activating this tool, you will not be able to receive messages, calls nor will you have internet connections until you deactivate it.

How to know if your Android has ‘fast charge’?

Mobile phones that have ‘fast charging, such as a Samsung’ actually work in conjunction with the charger, since the device sends signals to the charger of how much load you need for him to convey to you long enough and don’t overdo it.

It is very important to take into account that, any mobile with at least 18W, should exceed 50% charge in about 30 minutes, as long as it has at least 4000mAh.

One of the main ways that mobiles have to activate ‘fast charge’ is by observing the specifications that the charger has, usually they have the title ‘Supercharge’ or ‘TurboPower’, depending on the model.

However, in the rest of the specifications too you can check it by reading the ‘Output’ section, where you can see if it says that it has 5V≅2.0A (5 volts ≅ 2 amps) it means that it sends 10 watts, that is, it is fast charging.

Some Android cell phones They show on the screen if they are ‘fast charging’ or not, during the charging process. Either they show a double lightning bolt on the battery icon in the status bar, in the settings (entering ‘settings’ and then ‘battery’) or using an external application that helps you show the status of your battery.

How can you charge your Android if the battery is ‘dead’?

If your mobile battery is completely discharged or ‘dead’, and you try to load it, but it doesn’t work, you may be having problems somewhere. Mainly, you should look for the origin of the problem, since it can be from the charger you are using, the one that is damaged, the outlet you use or even the battery or charging pin of the mobile.

If even after trying each of the above options you do not find the solution, you can choose to remove the battery from the mobile for a few minutes, and at place it again charge it with its original charger. On the other hand, if you have a cell phone from which the battery cannot be removed, you can perform a battery removal simulation, just by pressing the Reset buttons, these usually vary depending on the manufacturer.

Likewise, in an extreme situation in which none of the mentioned tricks have worked, you can resort to a forced removal of the battery, As long as you know what you are doing and have the right tools, depending on the model of cell phone you have.

Finally, as a last resort, you must assist a technician who knows how to repair batteries, one of the techniques that might work would be a technique called ‘Electro Shock of Life’. This technique consists of applying a small electrical discharge to the battery, only if it is Lithium Ion, however, if it still does not work, it is advisable to replace it.

Miners Hashrate

Recent Posts

Mining RTX 3070 at NiceHash: Overclocking, tuning, profitability, consumption

Mining on RTX 3070. Overclocking, tuning, profitability, consumption: If you are interested in finding more…

6 months ago

Mining GTX 1660, 1660 Ti, 1660 Super: Overclocking, settings, consumption

Mining with GTX 1660, 1660 Ti, 1660 Super. Overclocking, settings, consumption, profitability, comparisons - If…

6 months ago

Mining RTX 2070 and 2070 Super: Overclocking, profitability, consumption

Mining with RTX 2070 and 2070 Super. Overclocking, profitability, consumption, comparison What the RTX 2070…

6 months ago

Mining with RTX 3060, 3060 Ti. Limitations, overclocking, settings, consumption

Mining with RTX 3060, 3060 Ti. Limitations, overclocking, settings, consumption, profitability, comparison Let's look at…

6 months ago

Alphacool Eisblock Aurora Acryl GPX-A Sapphire – test: 2.8 GHz++ are not an issue

Alphacool Eisblock Aurora Acryl GPX-A (2022) with Sapphire Radeon RX 6950 XT Nitro+ Pure in…

6 months ago

Corporate Crypto Strategies 4.0: Leading with Bitcoin Expertise

In the ever-evolving landscape of business strategy, Bitcoin has emerged as a pivotal asset. With…

6 months ago

This website uses cookies.


Notice: ob_end_flush(): failed to send buffer of zlib output compression (1) in /home/gamefeve/bitcoinminershashrate.com/wp-includes/functions.php on line 5420

Notice: ob_end_flush(): failed to send buffer of zlib output compression (1) in /home/gamefeve/bitcoinminershashrate.com/wp-includes/functions.php on line 5420