Test – Cooler Master Mastercase Pro 6 |Specs | Price

Hi all!

We return to Cooler Master today with the test of their latest case, the Mastercase Pro 6! On the program, a box that wants to be modular as possible, large to be able to install the largest configurations and a finish that wants to be upscale. The Mastercase range requires elements to be available as an option (hard drive cage for example) in order to adapt the box according to your configuration. Offered at a price of around 150 € it could be a good choice for those who want a spacious and modular case, as much as it would have to do well in the tests, which we will see immediately!

When we see the technical characteristics we see a rather classic Mastercase Pro 6 for a large case, in fact the dimensions are rather generous with 54.4 cm in length, 54.8 cm in height and 23.5 cm in width, which means that a minimum is required. space to wedge it! The weight of 11.74 kg is not excessive for its size but is still quite high, which is a good thing and announces solid materials.
Component compatibility is logically very good, with a graphics card that can go up to 41.2 cm without the hard drive cage installed and 29.6 cm with it, which still leaves a lot of room for a good little monster. The CPU cooler can peak at 19 cm, which ensures compatibility with all models on the market, you can take any with your eyes closed!
In terms of storage, the Mastercase Pro 6 has 5 3.5 ″ slots (2.5 ″ compatible), 2 2.5 ″ slots and even 2 5.25 ″ slots, which means that unless you want to make a large storage server there will be no not the slightest problem to install all peripherals.
The ventilation is rather substantial but remains classic, 3 x 12 or 14 cm at the front (compatible with radiator up to 280 mm), 2 x 12 or 14 cm above (compatible with radiator up to 280 mm) and 1 x 12 or 14 cm at the rear (radiator compatible up to 140 mm). The Mastercase Pro 6 comes standard with 1 x 14 cm on the back (with blue or red LED depending on the model) and 2 x 14 cm on the front, so the ventilation should be good original, which is a good point.
Offered at a price of around 150 €, the Cooler Master Mastercase Pro 6 has everything it needs for a modern case, let’s take a closer look!

The box is rather sober, we find on the front face 2 photos of the beast, the name of the model of course as well as the logo of the brand, on the back an exploded view of the case as well as a small listing of its strong points, and in 8 different languages ​​please!

Inside the box, in addition to the 2 huge polystyrene molds, the brand has seen fit to put everything in a bag which will make it possible to remove everything much more easily, which is a good point! We can also use the bag to transport the configuration once mounted, even if given the weight of the assembly as little as possible! In any case the transport should not pose the slightest problem given the protections present.

In the bundle you will of course find the necessary screws and the manual as well as plastic cable ties and self-adhesive cable ties. In addition to that, the brand provides 3 3-pin -> molex adapters to connect the fans directly to the power supply if necessary (they will therefore run fully all the time), 2 metal plates for the installation of a rheobus in a 5.25 ″ slot as well as a metal plate that will allow the third fan to be installed on the front if you wish (which will block the 5.25 ″ slots however).