How to update amd drivers in hiveos: Amd driver update command

Hive OS Linux commands for beginners x
Hive OS Linux commands for beginners

How to update amd drivers in hiveos: Amd driver update command: Users can use video cards from various manufacturers, so each miner can install any drivers for these cards at their discretion. To do this, you need to do the following:

Starting from version 0.5-70, a special program (utility) is integrated into the operating system, which makes it possible to install the most current and efficient Nvidia drivers, which can be activated in two ways: using the Hive OS web interface or via an SSH connection.

Nvidia-driver-update

If necessary, you can write the full address at which the archive with the driver software is located:

nvidia-driver-update http://download.hiveos.farm/drivers/NVIDIA-Linux-x86_64-392.61.run

In some cases, in operating systems, overclocking settings may be canceled after an update. To return the previous functionality, you just need to write the following command:

apt-get install —reinstall -y nvidia-settings

Update features

To implement the update process, you need to have three options:

  • SSH connection;
  • Teleconsole;
  • Physical access.
You Might Want To Read This:   HiveOS commands: Linux Commands for Beginners | Intermediate| Advance

As a rule, temporary files are stored in RAM, which implies editing the settings: allowing logs to be saved on the hard drive.

logs-on
reboot

The missing drivers can be found in the software collection about the address: http://download.hiveos.farm/drivers/

For AMD

Note: where you see **** replace with x’s in the same amount

tar -Jxvf amdgpu-pro-****.tar.xz
cd amdgpu-pro-****
./amdgpu-pro-install -y
dpkg -l amdgpu-pro

The integration of new software assumes the removal of previous drivers. To perform this action needs to be written: amdgpu-pro-uninstall.

After that, you should extract the contents of the packed file (driver – tar.gz) to the folder – / var / opt / amdgpu-pro-local. After completing these procedures, you can write a command that will work – amdgpu-pro-uninstall.

For NVIDIA

In this case, you need to use the command: NVIDIA-Linux-x86_64-3xx.yy.run

The user shouldn’t have any special difficulties here. In case of any error, you need to enter the command again – everything will work.

The main commands for managing Hive OS

There are many control commands in the Hive OS operating system , because this is typical for Linux-like systems. For the most efficient and efficient work with the platform, it is recommended to actively use them in practice. The most important commands are:

You Might Want To Read This:   Static IP for HiveOS installation: Best Cryptocurrency Exchanges HiveOS Top 15

miner – the user is presented with an open window with a running miner;

miner start | stop – start / stop the regulated miner;

miner log – miner log ;

miner config – launch the miner settings menu;

agent-screen – demonstrates the operating system client agent;

selfupgrade – updating the operating system software base using the console.

hello is a command for updating network data: IP addresses, config, etc. As a rule, it is automatically executed when the operating system boots.

firstrun -f – display information about the rig ID and password;

reboot – restart;

sreboot – forced restart;

sreboot shutdown – shutdown;

Ctrl + C – termination of any ongoing action;

Ctrl + A, D – disconnect the agent or miner from the screen to continue working;

Ctrl + A, Space or Ctrl + A, 1,2,3 – surfing through open windows if several miners are operating at the same time;

journalctl -u hive —no-pager – demonstration of the operating system boot log;

You Might Want To Read This:   How to connect to hive using OpenDev Watchdog: Lets Take a Peak

journalctl -u hivex —no-pager – demonstration of the X server log (visual interface);

dmesg – call the boot log – display information in system messages;

tail -n 100 / var / log / syslog – display the last 100 entries related to the system log;

ifconfig – call the system settings menu;

wconfig – call up information on the presence of wireless adapters;

mc – file manager, which is similar in structure and principle of work with a similar program – Norton Commander, but compatible with the Linux operating system;

ccminer-update – update all available CCminer forks;

nvidia-driver-update – installation of software for NVidia – specialized drivers;

selfupgrade **** (replace * with X) – downgrade of the operating system (HIVE OS). During the task execution, you should specify the required version.