Solution: My Samsung Galaxy S6, S7, S8, S9, and S10 Reboots and Shuts Down by Itself
–
Many of the users who own this phone have been experimenting a series of failures that has really perplexed us because it is not just a normal failure.
This is a very complicated thing because the phone reboots aggressively over and over again something that really causes a lot of annoyance.
So we have seen ourselves in the moral obligation to study this case and explain a great definitive solution to them to Samsung Galaxy S6 problem it restarts itself.
One of the best devices that have emerged in these times is undoubtedly the S6, there has even been a lot of speculation about whether the Samsung Galaxy S6 is waterproof, because of this it is that they have become very popular and several people have acquired it.
Surely if you have one of these devices you should take good care of it and give it maintenance, But what happens if your cell phone suddenly starts to pay and restart by itself? Have you not taken good care of it? Here we will help you solve it.
One of the questions that are regularly read in this blog is of this type, and when a Samsung Galaxy S6 restarts or shuts down, it crashes at startup. (where the logo appears).
Or it simply does not turn on is due to two problems: Brick o Bootlop Let’s see you must be saying to me “but what is this? Boy, explain it to me in Spanish.”
The causes can be diverse, from a software with errors, to a bad app installation, everything is really possible in this case so the factors are many, and similar in addition.
Mainly when these devices are improperly rooted, or an unsuitable rom is installed for the device, it is also about custom roms.
This is harmful to the phone, here we will always recommend that they use an official rom to avoid problems.
As we delve into why this happens we are going to explain a tutorial to solve this problem of satisfactory way so pay attention in detail.
Note: this is a process that is fully valid for all versions of the S6.
And ready in this way we already have our device working as it should be no need to worry for nothing else, we hope that the guide will serve you and that you can solve your problem.
Not exactly a few users have complained that their Samsung Galaxy S6 it restarts itself, it is a problem that seems to be becoming more and more common among owners of said mobile device.
That is why we have decided to create this extensive article to help you solve said problem once and for all and save by saying somehow your beloved Samsung Galaxy S6.
There are two reasons why this can happen and it would be that your Smartphone had brickeado or stay in bootlop.
When the mobile se brickea it stays on the screen off, there is no way to turn it on as you would normally and the only thing that turns on is the blue led.
In the case of bootloop what happens is that it restarts itself over and over again or it just stays pasted on the logo.
Any user who would have rooted your mobile incorrectly or trying to install a ROM that is not compatible with your mobile device can leave the Smartphone in these situations.
So that’s why I always say that you have to be careful and above all, be very careful when carrying out this kind of process.
First of all, make sure you have, even 70% charging on your mobile. Once ready you will have to download and install the Samsung USB drivers on your computer.
Now you also have to have the cable USB original of your device to be able to carry out the whole process without having to suffer connection errors in the middle of it.
You are going to try to enter modo recovery, for this you must press and hold the volume up + home + power buttons for several seconds and then release it.
Then you go where it says Wipe Cache Partition and you wait for the process to finish. Switch off the mobile phone.
You download the Odin program and you should also have downloaded the original firmware of Samsung Galaxy S6, remember to look for the exact model that you have, do not try to do it with another.
Now with your mobile off, press and hold the keys volume low + home + power for several seconds and then release, a warning message should be displayed and there you have to press volume up to confirm.
Open Odin on your PC, connect the mobile with original USB cable and after this you will have to go to where it says PDA / AP and load the firmware file in .md5 format that we downloaded previously.
Click on Start and wait for the process to finish, you will notice because above it says PASS in green.
If you have a mobile device from the people of Samsung, the truth is that probably you will be more than satisfied with the device.
Well, we can say that it is one of the companies that best terminals produces, although of course, they can also have certain problems at certain times.
Beyond that, the truth is that we have been repeatedly receiving inquiries from some of our readers, who want to know what are the usual problems that exist behind a Samsung that restarts only.
One of the most common problems of Samsung cell phones, at least if we constantly review the comments that users leave on social networks and the forums, it has to do directly with the fact that for different reasons, they begin to restart themselves infinitely, for no apparent reason.
What we have to say in these cases is that obviously, there are many users who they will look for a solution to fix this problem affecting your terminals, so you don’t have to get rid of them.
Before going into the possible elements that explain an operation of this type, we have to highlight in the same way that the developers of the Korean firm anticipate that we may be in the presence of various drawbacks, although luckily the solutions are much more limited.
In most cases, the problem has to do with an application that we have installed, that does not allow us to access the system, and therefore delete it so that the problem ends as soon as possible.
Before going into more details, we have to say in this regard that if you currently have many photos or files that you consider important, what we recommend is to make a backup.
Since your Samsung terminal is most likely reboot constantly, you have to do it from the computer.
For that, you must connect the device to the PC, and as far as possible, back up as much content as you can making a backup copy on your Android, because all the others you will end up losing after the process is finished.
What happens is that, as you have probably already guessed, to get our Samsung terminal to work as it should, the first thing we must do is take the trouble to perform a Hard Reset, which many users will also know as factory reset.
To carry out this step, the first thing you have to do is take your Samsung terminal and press the buttons at the same time Volume Down + Home Button + Power, or as your Samsung manual indicates that you do.
If everything works as it should, in just a few seconds you will be in Recovery Mode. Indeed, most of the time it takes no more than a handful of seconds enter to this.
We have to add later that, when we enter the Recovery Mode, we have the possibility to select several options, although we have to enter the one of wipe data/factory reset.
Which is the one that will erase everything on the cell phone, of course including the problems of automatic restart and the elements that cause it.
Before starting this process, and again whenever possible, we recommend that you make sure that your mobile terminal have at least 50% battery to prevent it from restarting during the process.
Once it finishes, it will send us to the same initial menu, although in this case we have to select the reboot option system now, which is the one that will restart our terminal in just a few seconds.
After Android reinstall, then we will have all the problems solved.
Have you been able to solve the problems of a Samsung that restarts only with this step by step?
Mining on RTX 3070. Overclocking, tuning, profitability, consumption: If you are interested in finding more…
Mining with GTX 1660, 1660 Ti, 1660 Super. Overclocking, settings, consumption, profitability, comparisons - If…
Mining with RTX 2070 and 2070 Super. Overclocking, profitability, consumption, comparison What the RTX 2070…
Mining with RTX 3060, 3060 Ti. Limitations, overclocking, settings, consumption, profitability, comparison Let's look at…
Alphacool Eisblock Aurora Acryl GPX-A (2022) with Sapphire Radeon RX 6950 XT Nitro+ Pure in…
In the ever-evolving landscape of business strategy, Bitcoin has emerged as a pivotal asset. With…
This website uses cookies.