Why is the External Hard Drive not reading on my Mac? – How to solve it
–
With the arrival of external hard drives today we have provided one of the largest helps when saving important information due to its large storage capacity, being larger than that of a flash drive.
However, like any component, is prone to failure during its useful life at the time of being used. In the event that something like this happens, we should not get nervous, since it usually happens that computers do not read the device well and here we will teach you how to solve said fault
These external storage devices high-capacity, they are the same as a hard drive, only they have the difference of being portable and do not need a computer to work. But of course, these usually present damage when they are not used properly or their maintenance is neglected.
An external hard drive can have different types of failures that make the information saved is lost or deleted without any cause. This is why knowing if the hard drive is damaged in order to repair these failures as quickly as possible is the most crucial thing in order not to lose the information or the entire external hard drive.
These faults are can present in the software and we will notice it at the moment. If it is a reading failure, the computer system itself will indicate when the disk will not be read by showing it on the screen, in the case of a hardware failure, it will not show any interaction through the system. Here we will show you how to solve these errors.
When it comes to failures from the software, we are talking about the computer system that sometimes it happens that it does not read external devices accurately due to having a bad driver installed. We will show you what the connection problems are and their solutions:
To avoid these problems, Apple always recommends its users to keep their Mac computer up to date at all times, in order to be prevented from problems like this or another that u may present.
Not only do failures usually happen on a Software scale, but also may get to hardware thus bringing worse problems than the previous ones. To the point of being able to burn the external HDD if it was installed wrong. These problems can be:
One of the connection problems that has happened to many with their hard drive is that the cable it has is damaged and that is why the computer cannot do the job of accessing it. The most effective solution is to change the cable that it has for a better one, opt for an eSATA type cable, since they are resistant and last longer.
In case the solutions that we have provided here have not helped you, you can make use of of Mac SMC management system to perform the connection error correction of your external hard drive. Here we explain how to do a Reset on this system.
This is one of the best functions after everything has not worked and this is the last option that we have. to start reset SMC system management you must:
Mining on RTX 3070. Overclocking, tuning, profitability, consumption: If you are interested in finding more…
Mining with GTX 1660, 1660 Ti, 1660 Super. Overclocking, settings, consumption, profitability, comparisons - If…
Mining with RTX 2070 and 2070 Super. Overclocking, profitability, consumption, comparison What the RTX 2070…
Mining with RTX 3060, 3060 Ti. Limitations, overclocking, settings, consumption, profitability, comparison Let's look at…
Alphacool Eisblock Aurora Acryl GPX-A (2022) with Sapphire Radeon RX 6950 XT Nitro+ Pure in…
In the ever-evolving landscape of business strategy, Bitcoin has emerged as a pivotal asset. With…
This website uses cookies.