How to Fix RCP Server Error When Not Available? | Solutions

In the Windows operating system it is very common to see the rcp server error when some communication is being carried out through the network between two or more computers or with a component of the same computer system.

If this has already happened to you, don’t worry. This error is very easy to correct.then we will give you the necessary methods so that you can correct it yourself and thus continue with your process.

What are the most common causes of the error?

There are many reasons that can cause the cpr bug on the server, but among the most common are those shown below:

Incorrect DNS or time zone settings

The most common main reason that does not allow the RCP server to share data over the network to another device is incorrect DNS configuration, since it is through it that you can transmit data.

Another reason causing the RCP server error is the wrong setting of the computer’s time zone, It is well known that for a process on the computer to complete and go perfectly, it must have the time zone according to its location.

How to fix RPC server issue?

If the message was already shown on your computer The server is not available or RPC server unavailableit is because you have the RCP server error present in it, if so, do not worry, we will give you the solutions for this error below:

Disabling the selective start function

Enabling selective startup causes the computer to starts with only a few features enabledand this can cause problems that cause the RCP server to not work or to work poorly, it is because of this that we recommend that you deactivate the selective startup function of your computer, the procedure to achieve this deactivation is as follows:

1. Turn on your computer as usual.
2. Open the executor, to achieve this press the Windows + R keys or press the right mouse button and select the Run option from the menu.
3. When doing the above, a window will be displayed, in it place the following msconfig, then press the enter key on your keyboard, you will be taken to the system settings. Another way to enter it is from the start menu, in the search engine of this menu, place msconfig and press enter, open the application that will open and that’s it.
4. Enter the General section of the settings, in it verify that the Normal Start option is activated, if it is not, activate it.
5. When you finish this proceed to restart your computer, when this restart is complete, check that the Server is working correctly. If your server still doesn’t work, try the solution below.

Renew DNS

Renew the DNS and manually clear your cache can repair all the problems that these DNS are presenting that cause the RCP server to not work well, the procedure to achieve this is simple, we will show you below:

1. On the home screen of your computer press the Windows + R keys or press the right button of your mouse and press the Run option.
2. When doing the above on your computer screen, a window will open with a space at the bottom, in this space place cdm and then press the Enter key on your keyboard. This way you will have opened the command prompt application.
3. In the new window, place ipconfig / flushdns and then select the Enter key option to run it.
4. Proceed to renew the DNS, to achieve this place in the open window ipconfig / renew, then press the Enter key.
5. Press the X at the top to close the command prompt.
6. To finish, restart your computer correctly. If this did not work you will have to reinstall or format your computer.

How does the RPC server stay activated so that the error does not repeat itself?

And the rcp server error occurs very often on your computer, apply the following settings to stop this repetition:

Activate remote assistant: In case you use the Windows internal firewall security system, enter the control panel which should be located in the start menu (if it is not, look for it from the Windows search engine), in this panel look for the Windows Defender Firewall section and go to their descriptions.

If you use an external firewall enter it and go to the descriptions of it. Once you enter the descriptions of the firewall go to the Remote Assistance sectioncheck that all the boxes found there are checked, if not, check them.

Correctly connect the devices to the network: To achieve this you must go to the network connections of your computer, right click on the network you are using, then in the menu that will be shown select the Properties option.

A new window will open in which you must locate the options Internet Protocol version 6 (TCP/IPv6) and Sharing files and printers for Microsoft networks, just next to them you will find some boxesverify that these are marked, if they are not, take care of marking them.