Bitmain Antminer D3 Profitability – In the summer of 2017, the world’s largest manufacturer of mining equipment Bitmain (China) began the production and sale of a new Antminer D3 – Asika for mining the popular dash coin, which runs on the X11 algorithm. Prior to this, the company released only ASICs for SHA-256 and Scrypt.
Everything is explained by the incredible power of Antmeiner – 15 GH / s. The price at the beginning was also very pleasing – only $ 1,450 per piece. But high demand raised the cost of equipment. Now on the official website of the manufacturer “flaunts” the figure of $ 2,700. However, the demand for a miner almost fell. Payback miner when mining Dash still attracts particular attention.
When the cryptocurrency market began its history, only Bitcoin took over the attention of all. Over time, the situation has changed dramatically. The complexity of mining has increased, and it has become very expensive to build farms. Therefore, users turned their attention to alternative coines, which were distinguished by course stability and economy (the costs of creating farms were lower). Among them, DASH began to be especially popular. However, with the help of asiki it was not mined. Used only video cards. After a while, it was still possible to create unique ASIC devices that allow mine this coin, while with greater profitability. The most popular is just the equipment of the D3 series from Bitmain.
What is a Bitmain Antminer D3 Miner ?
Appearance Antminer D3 standard. From the other miners case practically does not differ: compact. Delivered in safe, thoughtful packaging. The power supply is not included. Buy it separately. BP will cost about $ 200. You do not buy the controller separately – it is included in the ASIK design.
The car has three boards. Each contains 60 chips, as well as 3 connectors to connect power. There is also another PCI-E slot – on the control unit. The miner is cooled with the help of 2 powerful fans, uniformly blowing the radiator.
For the normal functioning of ASIK, it is necessary to connect all the connectors located on the hash-panel to the power supply unit. Also remember that only one power device can be connected to the same hash panel. You need to run Asik after applying electricity to all 10 PCI-E connectors.
Hashes ASIC at a speed of 15 gigachesh per second. Electricity consumption is 1200 W, but the indicator will change slightly. It all depends on the characteristics of the power supply and how accurate the power meter will be. Asik makes noise moderately. At a distance of one meter – 74 dB. If the air in the room is hot, the noise will increase as the fan will run at a higher speed.
Bitmain Antminer D3 Specifications
has a classic form factor. The body is flat aluminum. On the sides of the case of the AntMiner D3 are cooling fans that regulate thermal conditions. Such a thoughtful design eliminates unnecessary overheating of the device. Main characteristics of D3:
- Hashrate – 15 GH / s (can reach 16.2 GH / s)
- Algorithm – X11
- Energy efficiency – 93%
- Power consumption – 1, 2 kW at 25 ° C (with APW3 power supply)
- Optimum operating temperature – 0 – 40 ° C
- Network Connection Interface – Ethernet
- Chips – 180 pcs.
- Weight – 5, 5 kg
- Dimensions – 320x130x190 mm
Asik D3 is the most productive in its class. It is easy to set up and convenient to use. Compared with its predecessor, its effectiveness has risen by 10%. The device is perfect for mining DASH and other popular cryptomonet based on the advanced X11 algorithm.
As the power supply is optimal to use APW3 ++ from the manufacturer Bitmain. When connected to a 110V outlet, the power supply provides 1200 watts of power. To obtain a power of 1600 W, the power supply unit must be connected to a 220 – 240 W power source.
BP APW3 ++ is a quality reliable product. Specially created for mining equipment. It works almost silently. Equipped with 10 specialized PCI-E connections. Differs in compactness. Smaller than desktop computer power supplies. Its important advantage is the ability to function at 1600 watts. Due to this, it is compatible with D3, S9 and other miners.
Technical characteristics of Antminer D3
Externally, the D3 is no different from its predecessors: the same rectangular metal case, fairly compact dimensions (130 x 320 x 190 mm) and light weight (5, 5 kg). Area of use – mining cryptocurrency, working on the X11 algorithm: dash, pura, boolberry, monetaryunit and some lesser known.
The device has three boards, each of which is equipped with 60 chips and three connectors for connecting the power supply. There is an additional connector on the control board. To connect the miner, you need a power supply with 10 PCI-E connectors, which is purchased separately. Since the performance of AS3 D3 is impressive – 15 gigagesh / sec., Then the power supply unit is necessary appropriate.
Please note: BP is not included in the basic package, so you will have to pay an additional $ 150. Bitmain recommends its APW3 block. But for the controller to pay extra is not necessary, as is the case with Avalon, since it is already built into the unit.
The power consumption level of Antmeyner D3 is 1,200 watts. For cooling, two S9 fans are used, which produce a uniform blowing of the radiator petals. The noise level during operation is 90 dB. If you set the fans to 3,500 prm, the noise will drop to 70 dB.
It is recommended that the device has a capacity margin of 20-30% higher than that required for stable operation. The most sought-after model in this series is considered to be “Bitmain” APW ++ with a capacity of 1,600 watts.
Customization
Connecting and configuring Antminer D3 is as easy as any other Bitmain asyk: the same set of features, familiar control panels. It is enough to perform several simple manipulations:
- connect the power supply to the miner (connect the connectors to the connectors until it clicks);
- plug the power supply into the outlet;
- connect antmainer with a router;
- Determine the IP address of the device.
One of the easiest ways to determine the address is using the router’s start page. To do this, open any of the available browsers and enter 192. 168. 0. 1 or 192. 168. 1. 1 in the search bar, as well as a login / password pair. The default login is admin, the password is 1234, 1111 or admin (if the settings have not changed). After that, you will need to find the name of your miner and his IP in the list that opens.
Next, you can choose a mining method and set up equipment for solo mining, or connect to one of the pools, which is much more profitable. Note that in addition to Antpool’s own mining pool, Bitpool , Antminer D3 can work with other sites. We list the most profitable and reliable of them:
- Nicehash ;
- Prohashing ;
- ZPool ;
- P2Pool .
In the course of independent testing of this model on different pools, the performance was approximately the same: 16.2 Gx / sec. with power consumption of 1185 watts. With an air temperature of +20 degrees in the room, the rotation speed of the coolers was 3,200 rpm, the noise level was 74 dB. With increasing temperature, speed and noise also increased.
Yield and payback period of Antmeiner D3
In August 2017, when the new asik just went on sale, the dash rate was growing steadily and reached $ 300 by the end of the month. With the electricity tariff in Moscow $ 0.09, the profitability calculator showed monthly average profit values of about $ 4, 5 thousand. This means that the equipment paid for itself in less than a month. Of course, this situation did not last long. As soon as the market was filled with a large number of D3, the complexity of the network increased and the production fell significantly.
As of this writing (September 16, 2018 ), according to Coinmania, was $ 194 . So far, the decline continues, but according to expert forecasts, in the coming months, the cryptocurrency market should partially return the lost positions, and then the income from mining will also increase. At present, the average payback period for ASIK D3 is more than 2.5 years.
It is no longer possible to buy the Bitmain D3 model on the manufacturer’s official website, but they are still represented in the catalogs of Russian online stores. Price model with a hashrate of 19.3 gx \ sec. is about 100 thousand rubles.
In order to understand how profitable an investment in D3 can be right now, we suggest you use the online profitability calculator on the website nicehash.com . After you enter the name of the miner, the cost of electricity in your region and other necessary data, the service will calculate the approximate daily profit and payback period.
The history of the creation of Antminer D3
At the beginning of the formation of the cryptocurrency industry, the attention of the overwhelming majority of miners was focused on the MTC mining. Interest in other cryptocurrencies – promising and less costly – arose gradually, as the Bitcoin network became more complex. With the advent of Antmainers L3 and L3 +, many switched to litecoin, and a little later – to dash.
The X11 algorithm on which dash works consists of a complex combination with 11 hashing functions, but it requires much less energy in the computation process as compared to SHA-256 and Scrypt.
It should be noted that the creators of the new coin made every effort to exclude the possibility of its extraction with the help of Asics. But the plans of developers of cryptocurrency, as a rule, do not coincide with the plans of manufacturers of mining equipment. Especially if a monster like Bitmain comes into play . And when it comes to big money.
Taking into account the increasing popularity of dash, the Chinese corporation decided to develop a special device for the X11 algorithm. And soon a new asik called Antminer D3 went on sale.
High demand for the first and second batch of new equipment triggered a rise in its value: the initial price of $ 1,450 soon rose to $ 2,000 and up. But wishing to buy D3 did not become less. Of course, the excitement was fueled by the rapid rise in the cryptocurrency market, which just fell in the second half of 2017.
Advantages and disadvantages of asik-miner D3
The key advantages of the Antminer D3 can be easily attributed to the big name of its manufacturer. The equipment that came off the assembly line of the Chinese corporation “Bitmain” has repeatedly received high praise and enthusiastic reviews from both ordinary users and experts.
Miner D3 is easy to use, has high performance, provides a good income. In addition, it is designed for mining desh – coins, which today is one of the most promising for mining.
The cost of D3 is more affordable in comparison with other models of specialized mining equipment, which is also very important. Of course, we are talking about comparative accessibility, since the Asiki initially belong to the category of devices that are not affordable for everyone.
As for the minuses, they are the same for any mining equipment: rapid loss of relevance, long payback period. From the summer and up to the beginning of 2018, this model remained one of the most productive for mining coins using the X11 algorithm.
For a while, Pinidea’s Miner DR-100 remained its main competitor. A few months ago, the developers increased the DR-100 hash rate to 22 Gh, after which Antminer began to give way. And soon a new player was launched on the market – Innosilicon A5 DashMaster, capable of delivering 32.5 Gx with 750 W \ h of electricity, and this was a weighty bid for success.
Comparing Antminer D3 with other asics for dash
For a while, the Pinidea’s Miner DR-100, a reliable and compact unit with a capacity of 19 gh / sec and power consumption of 0.9 kW, remained the main competitor of the D3. A few months ago, the developers increased the DR-100 hash rate to 22 Gh, after which Antminer began to noticeably yield to it.
And soon a new player was launched on the market – Innosilicon A5 DashMaster, capable of delivering 32.5 Gx / s. (overclocking is possible up to 38 Gh \ sec.) with the consumption of 750 Wh / h., and this became a weighty bid for success. Especially considering the fairly affordable price for such a power – $ 2.7 thousand and a manufacturer’s warranty for six months.
Another competitor of the Antmainer D3 is the iBeLink DM22G X11 Dash Miner, a 2017 release with a capacity of 22 gh / sec and a power consumption of 0.81 kW, which does not lose relevance this year. Its distinctive features are the presence of functions of self-diagnosis and subsequent restoration, transmission of information by e-mail, the utmost simplicity in operation. To get started, it’s enough to plug in the electrical cable and Erhernet. The cooling system provides 5 fans, which completely eliminates overheating.
Comparison Chart D3 and Competitors
Summing up
So, just over a year ago, Bitmine launched a really high-quality product on the market – Antminer D3, but today it has already given way to newer models. Well, the alignment of forces in the cryptoindustry is changing with kaleidoscopic speed, and this is the guarantee of its constant movement forward.
Related posts:
Antminer S9 – Hashrate| Profitability| Setting Up| Overview 
Antminer x3 Hashrate – Profitability (Monero) | Specs | Set-up 
Antminer T9 + : Best Review 2021: Test Specs | Pros and Cons | Profit (Ethereum) 
Antminer DR5 Miner (34Th) – Hashrate | Profitability | Specs 
ASIC Antminer Z15 – Specs | Hashrate | Profitability | Payback 
Phoenix miner setup (Mining): Specs | Hashrate| VS Claymore (Profitability)
