5 solutions for when iPhone stuck on Apple logo

Update Samsung Galaxy S3 To Android... x
Update Samsung Galaxy S3 To Android 10

5 solutions for when iPhone stuck on Apple logo

Is your iPhone stuck on the Apple logo? You turn on your iPhone to browse the web, but it gets stuck on the Apple logo… Why? If “how can I solve?” is your next question, below you find three methods. Let’s take a look at a number of reasons why your iPhone may be stuck on the Apple logo and what solutions are available for you.

Everything was fine until your iPhone restarted and stuck on the Apple logo. You thought, “Maybe this time it just takes more time,” but you quickly realized that something was wrong. You tried to reset your iPhone, connect it to the computer and nothing works. In this article, I will explain why your iPhone is stuck on the Apple logo and exactly how to fix.

You Might Want To Read This:   What are the accounts or profiles with the most followers on TikTok? The Most Famous Profiles

If your iPhone does not pass the Apple logo, it is likely due to one of the following events:

    • During or after a software update.
    • During the’installation or the downgrade from the beta version.
    • During the iPhone jailbreak.
    • Reset the device from a backup.
    • When you migrate your iPhone from a previous device.

Now that we know why this problem occurs, let’s take a look at some possible solutions to fix it. These methods work for iPhone 12 series, iPhone 11 series, iPhone XR and X series, iPhone SE 2020, or any iPhone model you own.

Note: before moving on, make sure the progress bar on your iPhone screen hasn’t moved for at least an hour.

1. Reset your iPhone (usually doesn’t work)

Maybe you’re in the 1 percent, but in this case it doesn’t hurt to try. A hard reset forces your iPhone to turn off and back on quickly, which can sometimes fix a minor software glitch.

  • To perform a hard reset on an iPhone 6S and earlier, press and hold the Home button (circular button below the display) and the Power button at the same time until you see the Apple logo disappear and reappear on the screen, then release them.
  • If you’re using an iPhone 7, press and hold the power button and the button of volume reduction until the Apple logo disappears and reappears on the screen.
  • If you have an iPhone 8 or newer, press and release the volume up button, then press and release the volume down button, then hold the side button until the Apple logo disappears and reappears.
You Might Want To Read This:   How to fix SideBySide error 59 in Windows 11

2. Put the iPhone into recovery mode

Recovery mode is the next thing to try if you can’t force restart your iPhone.

When your device is stuck on the Apple logo, put it in recovery mode and then exit this mode. You can also try to update or restore using a computer (Mac or Windows PC) in recovery mode.

The steps to enter and exit recovery mode differ for different iPhone models.

3. Use DFU mode to restore your iPhone

DFU stands for Device Firmware Update. This is the (almost) safe solution when the iPhone won’t turn on past the Apple logo. To take a quote from our article, “this is the highest level of recovery you can perform on your device.

So, if the forced reboot or even recovery mode didn’t bring any success, the DFU mode is the way to go.

4. Check the USB cable and USB port

Faulty USB cables and USB ports on PCs and Macs can interfere with the data transfer process and damage your iPhone software. If you’ve had problems in the past, try a different cable or plug your iPhone into a different USB port. If you can’t figure out what’s wrong with your PC, it’s sometimes easier to use a friend’s computer when you need to reset your iPhone.

5. iOS update, restore and data transfer issues between iPhone and computer

A lot can go wrong when data is sent from your computer to your iPhone, mostly if you are using a PC. Your iPhone is just another device external to your computer, and many other software can step in and interfere during the critical moments of an iOS update or restore.

Let’s say you are using iTunes to update your iPhone software. Your iPhone restarts (which means it quickly turns off and on again) during the update, but on your computer it looks like you’ve disconnected and reconnected it.

Your antivirus software steps in and says, “Stop! I have to scan you! ”And stops the data transfer. iTunes stops updating and your iPhone remains half-updated and totally unusable. Usually, your iPhone goes into recovery mode and displays “Connect to iTunes”, but sometimes it gets stuck on the Apple logo.

If your iPhone stuck on the Apple logo after using iTunes to update, restore or transfer data to your iPhone, you will need to temporarily disable the software that caused the problem before continuing. The problem typically occurs on PCs, but can also occur on Macs.

Is iPhone still stuck on the Apple logo? Nothing works?

To be clear, if DFU mode didn’t help you, it means the problem has gone beyond simple solutions; it could be a hardware problem.

As we said, your iPhone is crashing somewhere in the boot process. When you turn on your iPhone, one of the first things it does is a quick check of your hardware. Basically, your iPhone asks, “Processor, are you there? Good! Memory, are you there? Good!” Your iPhone won’t turn on if a major hardware component isn’t initialized, why not can he light up.

In this case, it’s a good idea to contact Apple Support using one of the various options available: call, chat, email, and even Twitter. If you have an Apple Store nearby, you can go closely.

You Might Want To Read This:   Can Windows be installed on a Mac?