The modern market offers every customer a huge amount of different models of gadgets, smartphones and other similar devices. Despite the fact that the screen is made reliably, the customer decides to extend its life by purchasing safety glass, This is due to the fact that over time we are not as careful about smartphones as in the first stage. Today we will talk about how to clean the protective glass inside and what we need for that.
Safety glass has a modern-looking screen cover on smartphones and devices. Let it be with a chemical method based on tempered glass.
Important! Compared to ordinary film, it is several times thicker and harder. Therefore, if this coating is present on the phone, it protects the screen from fingerprints, scratches, moisture, and even shock. Despite these characteristics, brightness and color do not change.
Due to the multilayer coating, the thickness of the glass varies from 0.25 mm to 0.5 mm, the composition of which is as follows:
With active use, the top coat, which ensures the reliability of the unit, becomes dirty. Then the question arises how to clean the protective glass of the phone. How to do it and what is needed for it, we will consider further.
Protective film has appeared on smartphones for a long time. It is not a high-tech product and is present on every device. This product is characterized by the presence of three layers:
Important! The most important thing of the film is the correct gluing. To do this, you need to have a little skill, because the first time can not always succeed.
All protective films present in the market of smartphones and gadgets are divided into three types: matte, glossy and mirror. Let’s take a closer look at each look to see if there will be a difference in cleaning:
All of the above films are contaminated, and this is especially evident when dust comes under the coating. How to clean the phone film, we will now analyze.
If you are thinking about how to clean the film for your phone, then plain tape or, as it is also called, adhesive tape will help. For this you need:
After that there is a protective film adhesive side on the adhesive tape. Then remove the film very carefully and slowly. All the dust that was present on this product will disappear and the sticky layer will remain.
Important! If you need to remove scratches from the top of the protection, damage the imperfections with felt, a soft cloth or with the help of auxiliary products – white toothpaste, GOI paste or olive oil.
Another way to clean the protective glass inside is to use soap and water. To do this:
Today we disassembled all kinds of protective films and talked about how to clean the protective glass inside. As you can see, it’s very simple. Now you don’t need to throw out the old film and stick to the new one, because you can simply clean it again and stick the same protection on the gadget. Use our tips and simplify your life!
Many people buy smartphones of new models not only to be able to use all the modern features of such devices, but also to emphasize their status. And what style can we talk about if the screen is scratched or cracked at all. To prevent such possible difficulties, almost every phone user uses a protective film for the screen. Bubbles are formed due to the air coming under such a surface useful accessories like a film. It happens that the “flaw” occurs due to a small stain of dust, then the procedure is a little more complicated – you have to change the whole film. In order to first paste a film on your smartphone or have to paste it, you need to know how to remove bubbles from the film of the phone as this is perhaps the only and main nuance in this matter. Today we will discuss this in more detail and we will try to remove all obstacles.
This procedure requires extreme caution and a high level of cleanliness in the room. It is best to carry out all manipulations in the bathroom, because due to moisture, dust does not fly in the air. Do the following:
If you’ve been careful and your film isn’t exactly worn out, everything should go smoothly.
How to remove air under protective glass? Everything is a bit more complicated here, because excessive movements can violate the integrity of protective accessories. We recommend that you read the most common tips from experienced mobile users:
Important! You can also remove the cup by any of the above methods and clean its surface with a strip of tape. Scotch tape will collect all the dust and small debris, after which you can glue the protection back.
To avoid problems in the future, we have prepared a short list of recommendations for you:
Currently, the price of protective 3D glass for the iPhone 6 ranges from 900 to 2500 rubles. Most stores offer the services of gluing additional accessories for an additional fee (usually 30-40% of the cost of goods), but even they do not always manage to do it well, so the installation of protective glass will be the right solution in this situation.
Wipe the screen with an alcohol swab to remove fingerprints, dust, and dirt from the surface of the smartphone. Then use a dry microfiber cloth to remove wet cleaning agent particles.
Take a large blue masking tape to remove invisible dust particles, hair and crumbs. Peel and glue the absorber alternately. After completing the screen cleaning in step 1-2, carefully inspect the smartphone screen, you may have missed something. If this is the case, we recommend that you repeat step 1-2 until the surface is perfectly clean.
Grasp the protective glass in your hands while holding the edges, and then carefully remove the black board before installation by pulling down on the label.
Place the glass on the gadget at a distance of 1-2 mm, align the holes with the smartphone. Then slowly attach it to the screen. This step should be given special attention because it is on it that most beginners make mistakes. You shouldn’t rush here.
Lightly press your index finger into the center of the 3D glass for iPhone 6. After pressing, the process of gluing the glass will automatically begin, which is fast enough. Attention: after the glass presses the entire surface on the smartphone screen, you cannot click on its edges before removing the air bubbles.
Remove air under the protective glass that is not glued around the edge. Use a yellow microfiber cloth to expel air bubbles. Your movements should start from the center of the screen and end at the 3D edge of the glass. When the air removal is complete, click on the 3D edges of the cup to complete the gluing process.
The quality of gluing depends on many factors: experience, knowledge, handling, etc. If, as a result, the protective glass openings do not match the smartphones, we advise you to make adjustments in the following steps.
Most of the adhesive layer is located not only on the protective glass itself, but also on its 3D edges. If after completing the process of gluing the protective glass rests on a good word, it means only one thing, you have not glued it evenly.
Solution 1
Remove the accessories from the screen, carefully align the holes with the smartphone, and repeat steps 4-6.
After installing the cup, small air bubbles appear.
You probably didn’t glue the glass according to the algorithm listed in step 5. You applied force not to the center of the screen, but to its 3D edge.
2. solution
Try to remove the air particles by expelling them with movements from the middle of the screen towards its edge, if such actions do not lead to the desired result, remove the protective glass and place it according to step 5-6.
Do I need to stick protective glass on the iPhone 6? It is worth deciding on the purpose of such accessories. If you drop the phone frequently or its operation takes place in aggressive conditions, where any mechanical force can leave scratches or chips on the screen, the protective glass minimizes damage to the smartphone screen. If you handle your phone carefully, the need to use tempered glass fades into the background.
If you still have questions about how to properly attach the protective glass to your smartphone, we will be happy to answer them in the comments. As a rule, newcomers often make a large number of mistakes that cause the protective glass to peel off on the iPhone 6. Read our instructions carefully so that the glass lasts longer.
Mining on RTX 3070. Overclocking, tuning, profitability, consumption: If you are interested in finding more…
Mining with GTX 1660, 1660 Ti, 1660 Super. Overclocking, settings, consumption, profitability, comparisons - If…
Mining with RTX 2070 and 2070 Super. Overclocking, profitability, consumption, comparison What the RTX 2070…
Mining with RTX 3060, 3060 Ti. Limitations, overclocking, settings, consumption, profitability, comparison Let's look at…
Alphacool Eisblock Aurora Acryl GPX-A (2022) with Sapphire Radeon RX 6950 XT Nitro+ Pure in…
In the ever-evolving landscape of business strategy, Bitcoin has emerged as a pivotal asset. With…
This website uses cookies.