How to fix Windows access denied error 0x80070005

Error code 0x80070005 occurs when access to Windows is denied. Here’s how to fix it forever. Did Windows error 0x80070005 stop your work? Do not worry.

Error 0x80070005 refers to access permissions in Windows, which are sometimes encountered by users when they try to update Windows or install a new program and do not have full access permission for certain files. So, here’s how to fix error code 0x80070005 in Windows 10.

1. Grant yourself full permissions

As mentioned above, since the error code 0x80070005 is the inability to access Windows programs, the first method to fix it is to grant yourself full administrative permissions from the Settings.

1. Start Windows Run pressing the key Windows + R and type C:UsersUSERNAMEAppData and do click his OK. Enter the drive where Windows is installed in place of C: and username in place of USERNAME.
2. Now, click the right mouse button his App data and open Property.
3. In the next window, go to Security card and click Edit.
4. click on add.
5. Now type Everyone, click Check Names and finally press OK.
6. click on All and allow the complete control in Authorizations for all. click on OK.

Now reboot your system for the changes to take effect. You will no longer see the Windows update error 0x80070005.

2. Scan for Malware and Viruses

It has also been reported that this problem was caused by malware or viruses capable of deleting or altering important system files, such as the Windows registry.

To make sure your PC is free from malware, run the Microsoft Defender app, the free antivirus tool created by Windows to fight malware and viruses.

After the scan, restart your PC and try installing Windows updates. If you still encounter the same error code 0x80070005, don’t lose heart. Just move on to the next method.

3. Perform a clean boot

A clean boot is a way to identify which applications are causing problems in Windows. It works by allowing your PC to boot with minimal programs and drivers and helps you figure out which programs, if any, are causing a problem.

It differs from Windows Safe Mode in that it provides a greater degree of control in choosing which programs to shut down.

1. To get started, go to the Start menu search bar, type msconfig and click on the app System configuration.
2. In the next dialog box, go to Services tab, and check the Hide all Microsoft services radio box and click on Disable everything. Next, go to the tab Start and click Apri Task Manager.
3. From there, select any program that you think is giving you trouble and click Disable.
4. click on OK and close the dialog. Then, restart your PC to begin clean boot.

The next time your PC restarts, run the application you were having trouble with. If the problem persists, you now know that it is not due to the programs you have disabled.

4. Run the Windows Troubleshooter

Windows troubleshooters are a set of built-in tools provided by Microsoft to fix minor Windows problems, such as an update failure, Bluetooth or audio issues, and so on.

It could be possible that a glitch in Windows Update led you to the Windows error code 0x80070005. Follow the steps below and fix the Windows error code.

1. Press the key Window + X and click Settings.
2. Go to section Update and security and click Troubleshooting.
3. Now, click Additional tools troubleshoot, then click Windows Updates.
4. Grant the necessary permissions and use the tool to correct this error.

If the tool was unable to fix the “Access Denied” error, move on to the next method.

5: Run SFC (System File Checker)

Windows System File Checker (SFC) is an application that helps users scan and fix corrupt files, interrupting the installation of Windows updates. Follow the mentioned commands to use this utility tool.

1. Digita command prompt in the Start menu search bar, then select Run as administrator.
2. Digita SFC / scannow in the command prompt and press Enter.

If the process is successful, you should no longer see the Windows Access Denied error code message.

6. Reset permissions with SubInACL

SubInACL is a free command line application that can help you change permissions for files, folders, registries and other objects. Follow the steps listed below to permanently get rid of Error Code 0x80070005. Download and install SubInACL. Then, open a new Notepad file and type the following text in it:

Set OSBIT=32
IF exist "%ProgramFiles(x86)%" set OSBIT=64
set RUNNINGDIR=%ProgramFiles%
IF %OSBIT% == 64 set RUNNINGDIR=%ProgramFiles(x86)%
subinacl /subkeyreg "HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionComponent Based Servicing" /grant="nt servicetrustedinstaller"=f

Salva i file in All files come reset.cmd. After that, run the file as administrator by right clicking and selecting Run as A dministrator. Then update the program and delete the file.cmd.

7. Update Windows 10 manually

If you’ve encountered error code 0x80070005 during a Windows update, a manual update may be the solution for you. To update Windows manually, you’ll use the Windows Update Catalog.

Although Windows updates are downloaded and installed automatically, sometimes problems occur. This is where the Windows Update Catalog comes into play. It is a free website from Microsoft that offers updates for all Windows operating systems.

You can download cumulative updates manually from there even if Windows automatic updates don’t work, just like with error code 0x80070005. Follow the steps below to get started:

1. Go up Settings> Update and security> Windows Update.
2. Select View update history and write down or copy the Windows update version code. It will seem KB1234567.

So, visit the Windows Update Catalog and paste the Windows Update version code into the search bar. Then, click the D ownload button, which will ask for a popup on the screen.

From the pop-up, click the link to the file.mph to download it. After the download is complete, click the .msu file to manually install the Windows update.

After that, reboot your system. Your Windows will work fine now. This way, you can override error code 0x80070005 by doing a manual update.

No more Windows Error Code 0x80070005

If, however, none of the above methods have worked so far, you can use the all major Windows problem pulverizer: Windows recovery.

If you have followed all the above-given methods, we believe that you would definitely have gotten the solution for your Windows Access Denied Error Code 0x80070005.