How to install Endeavor OS – GEEK MATTER – Easy Steps

Endeavor OS is a continuous Linux operating system based on Arch Linux. The project is a successor to Antergos, and its goal is to provide an easy way to configure Arch Linux with an elegant graphical user interface. Here’s how you can get Endeavor OS to work on your computer.

Note: To install Endeavor OS, you must have a computer with at least 1GB of RAM and a USB flash drive with at least 1GB of storage space.

Downloading Endeavor OS

Endeavor OS is available on the official website and users can download it in ISO format. To download your copy of Endeavor OS, start by heading to the official website.

Once you have reached the official Endeavor OS website, find the “Download and Help” button and click on it with your mouse. After selecting this button, you will go to the “Download and Help” page. From here, click the “Latest Version” button with your mouse to get your hands on the latest version.

The latest version of Endeavor OS is relatively small at less than a gigabyte. So sit back and wait for the ISO file to finish downloading. When the process is complete, continue to the next section of the guide.

USB creation of Endeavor OS installation

Like all Linux operating systems, Endeavor OS comes in ISO format. The ISO format must be updated to a USB drive to install it on your computer. Therefore, we must demonstrate how to configure Endeavor OS on a USB.

To get started, you will need to download the Etcher app. Etcher is a program that works on all operating systems and is easy to use. Head over to Etcher.io and download it to your computer. Then install it, launch it, and follow the step-by-step instructions below.

Paso 1: Find the button “Flash from file” and select it with the mouse. After selecting this button, a pop-up window will appear on the screen. Using your mouse, find and click the Endeavor OS ISO file.

Paso 2: Insert your USB flash drive into the USB port. After that, click the “Select target” button with the mouse. Then, using the Etcher menu, select your USB flash drive. By selecting your USB drive as the target, Etcher will instruct Etcher to update the Endeavor OS.

Paso 3: Find the “Flash!” inside the Etcher tool and click on it with the mouse. The Etcher tool will start flashing the Endeavor OS ISO file to your USB by selecting this button. This process will take some time. When complete, close Etcher.

After closing the Etcher application, restart your PC in the BIOS. Then, inside your computer’s BIOS, set it to boot from USB. If you can’t figure out how to configure USB boot, check your computer’s official manual.

Installing Endeavor OS

To install Endeavor OS on your computer, start the USB installer. Then follow the step-by-step instructions below.

Paso 1: In the Endeavor OS installer, you will see a “Welcome” screen with an “INSTALL” page. Look for the “Launch Installer” button to open the Endeavor OS installation tool.

Paso 2: When you click the ‘Start Installer’ button, you will see a message asking you to choose between ‘Online’ or ‘Offline’ installation. Choose Online, unless you don’t have an internet connection.

Paso 3: Upon selecting your “Online” or “Offline” option, you will see the message “Welcome to the EndeavorOS Installer”. Choose your language. Then choose the “Next” button to go to the next page in the installer.

Paso 4: Look at the map presented to you in the installer. Then choose where you live by clicking the area with your mouse. When you select where you live, Endeavor OS will set the correct time zone.

Paso 5: After choosing your time zone, you will need to select your preferred keyboard layout. Look at the list of keyboard layout options and click on the one you prefer. When you have decided on a keyboard layout, click the “Next” button to proceed to the next page.

Paso 6: You must choose an installation method. Select the hard drive on which you want to install Endeavor OS. Then select your partition method. For best results, we recommend clicking on the “Erase Disc” option.

Paso 7: After choosing your hard drive and partition layout, you need to select your desktop environment. There are XFCE 4, KDE Plasma, Gnome Shell, Mate, i3, Cinnamon, Budgie, and LXQT.

Paso 8: When choosing your preferred desktop, you will need to configure your username, computer name, and password. Using the text boxes provided in the installer, configure everything. Click “Next” when you are done.

After selecting “Next”, Endeavor OS will display an overview. Find the “Install” button and click on it to start the installation. When the installation is complete, reboot and log into your new Endeavor OS system.