Does the TV change channels by itself? 5 solutions

What can you do if your TV changes channels by itself? Have you been the victim of a random swap of your favorite shows? Then you can solve the problem with the 5 simple solutions in this article. Here are 5 things to try if your TV switches channels by itself.

• Remove the batteries from the remote control
• Reset the TV
• Move any wireless infrared devices away from the TV
• Disable the automatic input switching mode
• Update your TV software

There is nothing more frustrating than having your TV changing channels by itself while you are trying to watch something. Consider the 5 steps mentioned above in more detail for hassle-free TV viewing.

Does the TV change channels by itself? Try our 5 solutions

Does your TV switch inputs by itself? Of course, this doesn’t happen when the TV is off or you’re not watching it. But it happens not even to do it on purpose during a football match, before an important sentence in a movie or as soon as you turn it on. How can you prevent this from happening? Coming up, there are 5 solutions that will help you solve this problem. Stay tuned.

1. Remove the batteries from the remote control

We will start with one of the simpler solutions. That is, remove the batteries from the remote control. You should do this while you have the TV on. Does the TV stop changing channels by itself? If so, the problem may have been the following.

• One of the buttons on the remote is stuck and causing the problem
• The remote control is defective

If one of the buttons on the remote appears stuck, you will need to free it. This is the only way the TV can function normally again. If the buttons don’t appear to be stuck, you’ll need to replace the remote.

In the case of a stuck button, you can free it using cotton swabs and alcohol. (This is denatured alcohol, but there’s nothing stopping you from celebrating with a pint once the job is done.) Here’s how to do it.

1. Dip a cotton swab in denatured alcohol. Remove excess alcohol from the cotton swab.
2. Rub the Q tip around the glue button. Do this until you can press the up and down button without it freezing.

But what if the remote control needs to be replaced? You may be able to get a free replacement if your TV is still under warranty.

2. Reset the TV

Resetting the TV is another simple solution. This may be all you need to do to stop the input jump. Here’s how you can reset yours.

1. Turn off the TV by pressing the power button
2. Plug the TV into the power outlet. Wait 2 minutes.
3. Plug it back into the power outlet
4. Turn it back on using the power button

After performing a TV reset, test the TV to see if it still changes the input by itself. If not, you may need to reset to clear any settings that were not working properly. Now you can enjoy TV as you should again.

3. Move any wireless infrared devices away from the TV

Although rare, wireless infrared devices close to the TV may interfere with its input signal. This causes the TV to switch inputs by itself. You should move one of these devices away from the TV for it to work normally again. A wireless infrared device, even that of a neighbor placed near your TV behind the wall.

• Intrusion detectors
• Control units for home entertainment
• Cordless microphones
• Headphones
• Modem
• Printers

If the TV stops switching inputs after removing one of these devices, then you have found the culprit. Keep that device in another room while watching TV.

4. Disable the automatic input change mode

Some TVs are equipped with an automatic input switching mode. Is this mode activated on your TV? Then your TV will automatically switch inputs when it detects a mobile high definition link. Swap screens regardless of whether you are watching the season finale of your favorite series or not. So how can you turn off auto input edit mode? Here is what you will need to do.

1. Press the “HOME” button on the remote control
2. Go to “SETTINGS”
3. Select “EXTERNAL INPUTS”
4. Go to the “AUTOMATIC INPUT CHANGE (MHL)” option.
5. Disable this setting

You will then need to monitor your TV to see if it stops changing channels by itself now that you have this option turned off.

5. Update your TV software

A simple software update is often all a TV needs to start working properly again. This is because software updates do the following.

• They improve the safety of your appliance
• They improve the stability of your software
• They remove all outdated features
• They improve your user experience

To update your TV’s software, you will need to navigate through your TV’s settings. Here’s what you should do.

1. Make sure you have connected the TV to the Internet
2. Press the “HOME” button on the remote control
3. Go to the “HELP” option.
4. You should then choose “CUSTOMER SUPPORT” then “SOFTWARE UPDATE”
5. Then press “OK” to start the software update

After updating the TV software, you will need to check if it keeps switching inputs by itself. If so and you’ve tried the other fixes in this article, you may need to call a technician.