Find out if your hard drive is failing using SMART in Windows 11 and 10

There is a technology called SMART (Self-Monitoring, Analysis and Reporting Technology) that is built into your Windows device to determine if your device is okay. the SMART The feature can predict if one of your hard drives might fail soon by checking its health status. It is very important that you regularly check the health of your drives using this technology, as it can always help you protect your valuable data.

In this article, we explain in detail how you can make use of the SMART function on Windows devices to check the status of their hard drives.

Method 1: Use the WMIC drive status command from CMD

Paso 1: Click on the Search icon on the taskbar.

Paso 2: Writes on cmd and click on the Execute as an administrator option for the command prompt.

Paso 3: when CMD is opened in elevated mode, copy and paste the following command and press the button Get into wrench.

wmic diskdrive get status

Yes there are 2 unitsyou should get 2 correct states As shown below. If the state is OKyour hard drives are no failing, congratulations!

If you get values ​​like little, caution O unknown instead of the OK status, it is very likely that your hardware is failing.

Method 2 – Use CMD WMIC Disk Failure Prediction Status Command

Paso 1: About him taskbarclick on the Search icon.

Paso 2: At Search bar, writes on cmd and choose the Execute as an administrator option.

Paso 3: In the command prompt window, copy and paste the following command and press the button Get into wrench.

wmic /namespace:rootwmi path MSStorageDriver_FailurePredictStatus

the Predict Failure the value must be Fake. If the value is fakelater everything’s fine.

Otherwise, if you get Certain value, then your the hard drive may fail in the near future. The value against Reason field gives you a code indicating the actual problem. The meaning of this code can be deciphered by contacting the manufacturer of your device.

Method 3: Use PowerShell Disk Failure Prediction State

Paso 1: Click on the Search icon on the taskbar.

Paso 2: Now writes on Potencia Shell at search bar and click on the Execute as an administrator option.

Paso 3: In the PowerShell window, copy and paste the following command and press the button Get into wrench.

Get-WmiObject -namespace rootwmi -class MSStozzzzxarageDriver_FailurePredictStatus

Among the results returned by the command, look for the Predict Failure parameter. If it is Fakelater everything’s fine with your units.

If you succeed Certain as a result instead, then the Self-Monitoring, Analysis and Reporting Technology (SMART) tool is predicting that your hard drive might fail. There will be another parameter called Reason. If the value of Reason is greater than what 0You should contact your device manufacturer for the meaning of this code to interpret the reason for the possible drive failure.

Method 4: Using Performance Monitor

Paso 1: Click on the Search icon on the taskbar and search Performance Monitor.

Paso 2: Navigate to the next location double-clicking on each of the folders along the way to expand them.

Data Collector Sets --> System

Now the right button of the mouse on System diagnosis and click on the Start option. Wait a second before continuing to the next step.

Paso 3: Next, navigate to the next location double-clicking on each of the folders along the way to expand them.

Reports --> System --> System Diagnostics

In the specified path, you will be able to see a report with your name that starts with your computer name. Simply click this report to view it in the right pane of the window.

In the right pane of the window, scroll down and look for the section called Basic system checks in the report Now look for the section called disk checks. to expand this section by clicking the plus icon associated with it.

Now in the section test groupsyou should be able to see a test group by name SMART Prediction Failure Check. Compared to this group, the value in the It has failed the column must be 0 and the Description It should be Passed. If you get other values ​​for these columns then it is cause for concern.

Once you do all these steps, you will definitely be able to conclude if your hard drive is failing or not using the Self-Monitoring, Analysis and Reporting Technology (SMART) built-in feature. And if you find that there is something wrong with your drive, and if you can still access your drive, go ahead and back it up right away.

Tell us in the comment section if you found the article useful or not.