How to Draw the Complete Plans of a house in Autocad? – Create your Designs

AutoCAD is one of the most used for the elaboration and/or creation of plans, whether they are buildings, houses, premises, among others, which is elaborated in 2D dimension through controls and graphics that manages to approach a virtual reality.

This Software is the favorite of the architects and engineers when planning a work, however, if you want to make a basic plan for your home, you can also do it from home. If you want to create or draw the complete plans for a house from AutoCAD, but you have no knowledge of how to use this software, you are in the right place.

However, in order to use this amazing software you must set as Windows operating system, preferably versions of Windows 7, 8.1 and 10, in their 32 or 64 bit models, depending on the version.

However, the rest of the requirements to obtain AutoCAD are not a problem to worry about, for them, below, we will describe the main tools that you should know to drawing a plan in AutoCAD.

How to measure the meters of a house plan in Autocad?

If you wish measure how many meters is the plan of a house in AutoCAD you can do it in a few minutes using the plan’s selection and area calculation tools.

You can find these tools by entering the Drawing and annotation space, where you should then go to the ‘Start’ option and select ‘Utilities’, so that a menu is displayed where you must click on ‘Measure’ and then on ‘Area’.

But nevertheless, there is a way to get faster to the ‘Area’ option, which consists of just looking for said option in the command bar. Likewise, there are also other ways with which you can measure or calculate the area or the meters that the plan of a house has, with these tools you will be able to:

• Measure the plane delimiting the area joining points along the contour: with this tool you can join point by point around the area when delimiting, in order to exclude the zones that you do not want to add in the calculation of the meters of the plan.
• Calculate the area of ​​the plane with curved contour: with this tool you will be able to convert the delimitation lines into curves to join points more exactly in the curved areas.
• Finding the area of ​​a plane with interior holes: this tool will help you rule out internal holes that you do not want to include in the total meters of the plan.

What to do to download templates in Autocad to start drawing the house?

In addition to offering you incredible tools for drawing up a house plan, it also offers you a small variety of templates that you can use to start the plan you want. These templates, which have the extension DWG in a file or DWT, can be found on your computer just using the following address: C:ProgramDataAutodeskACA espTemplate

To use them you just have to enter the work area and select the main AutoCAD button, represented by an ‘A’, and select the ‘New’ option, then click on ‘Drawing’. Finally, you will be able to see how a folder is displayed where you must select the template of your choice so that it is established as the base plan for the preparation of the house plan.

How to start drawing the walls of a house plan in Autocad?

Starting a plan may seem complicated, but with the help of the templates and tools that AutoCAD offers you with a Cad Software. On the other hand, after you have started the plan with the help of the tools described in previous points, you will need to draw the walls of the house the plane, however, there is a command that will help you.

Using the ‘Offset’ tool

When you start the plan you will see that most of the walls share the same thickness, to change this and make the walls in the drawing you will only need to use the ‘Offset’ tool.

You can find this tool by clicking on the start tab, then you must select option ‘Tool group’ and finally click on ‘Modify’ where you can find the ‘Offset’ tool.

With this tool you can add thickness to the exterior walls of the house on the plan, where, from them, parallel lines will be created at the distance established on the plane.

How to trim and ‘Splice’ the lines of a house plan in Autocad?

If you have already used the ‘Offset’ tool to add thickness to the walls of the house within the plan, you should then use the ‘Trim’ tool to correct the corners and set them correctly. Like the ‘Offset’ tool, this tool can be found in the ‘Tool group’, by clicking on ‘Modify’.

On the other hand, in the same menu you will be able to visualize the option ‘Splice’ that can help you in the same way as ‘Cutout’. However, if you decide to use this option you must use a radius of 0 and then click on the L key, this will help you to perform the action multiple times on different lines without having to repeat the command.

What should you do to download the plan of a house made in Autocad?

After having followed the instructions, and put into practice everything described above, you can now start making the plan of a house whenever you want. However, perhaps you have not been convinced by the work that this entails or you do not feel satisfied with the final work.

For this reason, you can also choose to download a plan of a house made in AutoCAD on the web, on official or professional pages you can find a wide variety of incredible plans made by experts. We know that working in AutoCAD can seem complicated, and at first it will always be difficult to learn the function of the commands, however, with practice you will be able to elaborate better and better plans.