How to Remove a Dotted Line in Microsoft Word Like an Expert – Helpful Tips

Through the Microsoft Word editor, you can transcribe, edit, copy, paste texts, create tables, number pages from any sheet, images and others, you can also add or remove lines or point connectors among others.

But if the latter is already activated or a particular symbol appears out of nowhere, what options do you have to eliminate it from your word processor sheet? Next, we will explain some useful tips in this article of how you can do it like an expert, just keep reading them below.

How can lines or connectors be removed in Word?

You are transcribing your work and suddenly a line or connector is activated that breaks your work, that causes you annoyance and this is a bit tedious to be able to continue working from your word processor Word How can you remove it? Just follow the following steps that we will give you below.

First select the line or connector by clicking on it, then press delete, and if you want to delete several at the same time, select each of them by holding down the Ctrl key, while you are selecting each one of them, and finally delete or Delete. Now, if you also want to know how to align or until adjusting a table in Microsoft Word, you can keep contacting us

How can you remove a horizontal line without modifying other factors in the document?

To remove a horizontal line from your document without any problem, that is, without modifying other factors, you just have to carry out the following steps:

Hover over horizontal line, then go to Menu bar and select the Home tab, then, Click on the arrow located next to the Borders and shading button and click on the No border option and voila, problem solved. Even so, your problem persists and your document presents modifications. I invite you to visit Microsoft Word Technical Support.

Complete Guide to Remove Dotted Lines in Word Document Easily

You decide to open your word processor Word to start your work, but suddenly while you are transcribing the first line and you are going to follow the second, a number of dotted lines that interfere in the same.

You try to fix your situation by hitting Enter after a full stop, but the problem continues. On the other hand, you decide to insert a new blank page and nothing works, the timeline keeps coming out. What can you do?

Then have a little patience, problems like these usually happen to usIt may even be difficult for us to do something as easy as knowing how to close a document in Word correctly, but for that we are here to help you.

That amount of dotted lines, you will ask yourself, why did they arise, if you have not requested them from your computation? And from your Word text editor. This situation is due to when you have activated the option of Show text limits, to deactivate this option you just have to do the following:

Go to the Word Window Menu Bar, and select the first tab, that is, the File tab. Next, the window will be displayed, locate and double-click Options located in the lower left part of it.

Immediately another window will open. General options for working with Word, where you must select the Advanced category on the left side of it.

Then, go down with the scroll bar (up-down) to locate and deactivate in the section Show document content, Show text boundaries option, and finally you click on accept and you will notice that your problem has been resolved.