How to set a fixed IP address for PlayStation 5? – Static IP

The PlayStation 5 video game console has come with great force to stay. A large number of users want it or already use it, but having it is not the only important thing, but also know how to configure the IP address. The following will show how you can put a fixed IP address for PlayStation 5.

What are the steps to configure a static IP?

To start you have to go to ‘Settings’ from the main panel, then to ‘Network’ and then to ‘View connection status’. Being there you can see what the IP address is and you will have to set ‘IP address settings’ to automatic. The displayed IP address will have a final number that will vary according to the number of devices connected to the network.

In order to assign a fixed final value, you have to choose a number that is not reserved so that it does not match. To do this you have to go to the previous menu and select ‘Configure internet connection’, click on the current network and go to ‘Advanced settings’. Then you have to click on ‘IP address settings’ and select in ‘Manual’.

Once this is done, it will simply be necessary to write the IP address and assign a final value that is high so that it does not coincide with other connected devices. Then you have to configure the ‘Subnet Mask or Gateway’ and leave the values ​​as they were. Then the DNS values ​​should be the same as Google’s. Once this is done, click on ‘Accept and that’s it’.

How should a network be set up for PS5?

To begin, you must connect the console using a LAN cable. Then you have to go to ‘Settings’, then to ‘Network’ and again to ‘Settings’. Done that is due click on ‘Set up internet connection’ and ‘Configure wired LAN’, done that you are ready.

Why should the PS5 ports be opened?

Basically, it is advisable to have the ports of a PlayStation 5 open because this can greatly improve its connection performance. By opening these ports the connection will be direct to the internet without depending on a router.

What is the function of NAT in PS5?

Basically, NAT is the connection mechanisms between two network points. NAT is the acronym for Network Address Translations. Thanks to this connection, it is possible to maintain a stable internet connection in online games, and thus improve the gaming experience.

Open NAT

First you have to go to ‘Settings’, then to ‘View connection status’. From there you can see a section that says ‘NAT Type’ and a number that can range from 1 to 3.

Which is better

Among the three values ​​that can be found in a PlayStation 5 NAT, the best and most recommended is number 1. The reason for this is that this type of connection allows you to be directly connected to the internet and thanks to this the online gaming experience will greatly improve in connection and fluidity.

How to improve the connection for the PS5?

When it comes to gaming experience, the PlayStation 5 really has a head start. However, there are some tricks that can be applied to achieve improve internet connection in online games and thus improve the experience. The following will tell you what to do with a wireless connection and with an Ethernet cable.

Wireless connection

For wireless connections, it is best to use Wi-Fi repeaters. As low internet signal strength sometimes causes some connection problems, a repeater can be used to increase the range from the original Wi-Fi signal to the console.

Cable Ethernet

Something that can be useful in the case of using an Ethernet cable is change DNS server settings. This can be done from the connection configuration, and for this you will simply have to configure the servers to be the same as Google’s.

The truth is that the great PlayStation platform is highly recommended, especially if you learn to configure well. This is why this connection setup tutorial is highly recommended.