What to do when iPhone won’t turn on

We spend most of our time on the phone. Sending messages, reading WhatsApp and calling friends has now become our daily routine. Seeing that our iPhone doesn’t turn on in the middle of the day can be stressful and ruin all of our plans. Fortunately, you can fix iPhone not turning on quickly and effortlessly. In this article we will talk about the problem and its solutions.

Also Read: iPhone Overheats, How To Fix

Why won’t my iPhone turn on?

When an iPhone no longer turns on, the causes can be many: from simple ones such as battery consumption to more complicated ones such as hardware damage. Let’s understand what the causes are and then let’s see how to solve. The most common iPhone problem is the low battery. It can happen that the phone quickly drained the battery and shut down. This can be due to blockages, overheating, battery wear.

Even a small fall could cause serious ones physical damages. Carefully inspect the display and the phone charger connector. If you notice any damage, then it’s time to go to the nearest Apple Service Center and have your iPhone repaired. Most iPhones are water resistant, but i liquids they can still damage the device. While some sources claim that keeping your iPhone soaked in rice is a helpful solution, this is actually not the best remedy. You should definitely contact the Apple Service Center.

Read also: Phone not charging, 7 solutions

What to do if my iPhone no longer turns on?

First, you should define whether the problem is hardware or software. Since there are many different reasons for iPhone failure, you should narrow down the problem starting with the most common problems and their solutions. Software problems are easier to detect and fix. If you’ve ruled out all software crashes, it’s time to inspect the hardware ones. Follow the instructions below step by step to get your iPhone back.

1. Charge the battery

IPhones can suddenly shut down even with a fully charged battery. Here’s how to figure out if it’s a charging problem and how to easily fix it. Plug in the charger and wait an hour. In a few minutes, you should see the battery charging icon on the screen. If your iPhone is showing signs of life then everything is fine, all you have to do is wait. If you don’t see a charging screen within an hour, try checking your charger carefully. Don’t worry if you don’t see a charging screen right after plugging in the charger, mostly you would have to wait a little longer or just switch chargers.

2. Check the cable and charger

Chargers are fragile, so it is highly recommended that you purchase a new charger if it is broken. But what to do when your iPhone still shows a black screen and charging doesn’t help? Well, it’s time to carefully inspect your charger and its components. Make sure the charger is connected firmly and is not damaged or cracked. Check all the components of the charger: USB cable, jack, power adapter. They should also be undamaged and securely connected.

If the charger is visually good, try connecting it to your Mac. If it still doesn’t work, buy a new charger. If your iPhone turned on, congratulations – the main problem was with the charger, you just need to buy a new one. But if the iPhone still won’t turn on then go to the next steps.

Read also: iPhone power saving, how it works

3. Restart your iPhone

Restarting an iPhone is a known remedy for various phone bugs. While it may seem like a very obvious and even unnecessary way to fix a problem, it’s actually a good indicator of whether or not the problem is serious. To perform a simple restart press and hold the side button for a few seconds. If your iPhone reacted by showing a slider, you should slide it to turn off the phone. It was most likely a simple software glitch and the problem was fixed. Otherwise, if iPhone doesn’t turn on, you should try a force restart.

4. Force restart

A forced reboot allows you to boot the device when the standard reboot doesn’t work. The procedure varies depending on the iPhone model. If your iPhone has a physical Home button (iPhone 5 to iPhone 7), press and hold the Home button and the Power button at the same time to perform a hard restart. If you have an iPhone 8 or newer, press and hold the volume up or down button and the power button at the same time. After pressing the buttons, wait until the Apple logo appears.

5. Backup and restore iPhone to factory settings

Before restoring your iPhone to factory settings, make sure you have a backup of the information on your phone because after the reset it will be erased. Backing up iPhone is an essential step that prevents data loss. You can make a backup using iCloud or your Mac. When your iPhone is off, a laptop is the only way to back up your data.

Connect your phone to your Mac. On Mac with macOS Catalina, open Finder, on Mac with Mojave or earlier, open iTunes. Follow the onscreen instructions: enter a passcode, select “Trust this computer”, etc. Place the iPhone on the Mac and wait until it appears in the tab. Click Back Up Now. Great, your data is in a safe place.

Now all the contents of your iPhone are transferred to your Mac and the phone is ready to be reset to factory settings. It should remain connected to the laptop for further steps. On the same tab as the backup, click Restore. Select Reset again when prompted for confirmation. After the reset, your iPhone will restart. THEDoes your iPhone already look new to you? It should, because it now contains no information and has the latest iOS version.

6. Put iPhone in DFU mode

DFU (Device Firmware Update) mode is the deepest type of iPhone reset that updates the phone firmware. If for some reason the standard reset doesn’t work for your iPhone, DFU could help you out. The main difference between DFU and standard recovery is that with DFU you can choose the firmware for your iPhone. Double check if your iPhone has a backup because DFU restore erases all personal data. It seems the procedure is easier if you follow the steps below.

Connect your iPhone to Mac. Press and hold the Power button and the Home button (or the volume button if you have iPhone 8 and later) at the same time for 5-10 seconds. After 10 seconds, release the power button but keep holding the home / volume button for another 5 seconds. If the screen stays black, your iPhone is in DFU mode. Check if there is a warning in iTunes that the device has been detected in recovery mode. To exit DFU mode, force restart your iPhone.

Also read: How to put iPhone or iPad into DFU mode

7. Check your display

If you’ve followed all the steps and your iPhone is showing no signs of life, then perhaps these are display antics. Examine the phone screen carefully, look for any physical or liquid damage. If you have found any, contact Apple service and have your iPhone repaired. A quick option to check if your iPhone has hardware problems is with the help of iTunes.

Connect your iPhone to your Mac. Open iTunes. If iTunes doesn’t recognize iPhone, it’s most likely a hardware problem. You should immediately backup your data and then contact Apple service.