How to Fix Wii Remote Not Syncing with Console? – Solution

As is well known, the Nintendo Wii controls are synchronized to the console via infrared, these make them a practical and easy-to-use tool. However, there are times when these controls become out of sync and that is where the problems begin. If this is the situation you are going through right now, don’t worry. We have the solution for you!

How can you check if control binding was done with the console?

The connection of controls in Nintendo consoles has always been a popular topic and the Wii remote control does not escape this. In order to play the first thing you have to do is check if the binding of the control with the console has been made correctly.

For this you just have to press the power button on the Wii controller, if when doing so the console turns on it is because the connection is in perfect condition. If, on the other hand, the console does not turn on, it means that it is possibly having connection problems.

What can you do to properly sync your remote if it doesn’t finish as usual?

When the Wii Remote does not automatically sync with the console, must be done manually. There are several ways to make the connection between the two reappear, such as restarting the WiFi signal, checking the batteries or checking the status of the console; If none of these options work, you should contact Nintendo Customer Service to report the problem.

Restart Wi-Fi signal

Hard resetting everything is always something that tends to work when your console has been on for a long time or has abruptly shut down at some point, this refreshes the signal and the connection.

Therefore, turn off the electrical network of your console and also that of your WiFi, leave it off for 30 seconds and then turn it back on. connect everything and turn on the console, if the problem is solved leave everything as it is. In case you continue to have problems, try another solution method.

re-synchronize

If the problem continues, you can choose to sync the controls again. This is an option that Nintendo added for exactly these types of cases in which Wii remote stops working. To do so, you just have to follow the steps that we show you below, it is a simple process to perform and quite fast.

• The first thing you have to do is turn off your console, wait 15 seconds and turn it back on.
• wait until it appears the ‘Health and Safety’ warning. At this point you should open the SD card slot on the front of the console, while simultaneously holding down the red ‘Sync’ button for 15 seconds.
• On the Wii Remote, remove the battery cover and press the red ‘Sync’ button located there.
• Now press both buttons, both the one on the controller and the one on the console and wait for both to pair, this can take approximately 10 seconds.
• If you have other controls that you want to sync, just follow the same process.

Check the status of your batteries

Checking the condition of the batteries is important because apart from is one of the most common reasons for which the controls stop working, it is an option that is not so quickly thought of. These controls use 2 AA type batteries which can be exchangeable or rechargeable (this is up to you).

Nintendo explains that the batteries have a duration time of 60 hours if used normally. This time is reduced to 25 hours if used as a pointer.

If you have not consumed this time then remove the batteries and put them back, otherwise the hours have been exceeded then the best option is recharge them or replace them with new ones. It is necessary that after changing the batteries, the synchronization process that we explained previously is carried out again.

Repair or replace your remote

If you have tried all the options and nothing works anymore, then it is time to replace your remote control. Like all of them, these have a useful life time and this is influenced by the way in which they are used. you’ve used since you got your console. The good thing is that they have lowered their price quite a bit and you can easily get them in any store.

We recommend that before changing your control you contact the nintendo customer service and wait for a response from them, which can possibly solve your problem and thus avoid spending unnecessary money. While you wait for an answer you can choose to find out the way in which video games can be created and then used on your console.

Check the status of your console

If all options and controls have already been tried continue with the error of not synchronizing, then most likely it is the console that is failing. To get rid of doubts, try your controls with a friend’s console and if they work then the problem is in your Nintendo.

You can take it to repair at authorized places and if it doesn’t work, the solution is to opt for a new console. At this point, the only thing we can recommend to keep you entertained is to download some good games to play on your Android and thus the wait for your console will be less long.