How to see how much RAM your PC has

How to see how much RAM is in Windows 10? Your computer has a section of short-term memory called RAM, which you need to be aware of. However, most of us don’t care much about the amount of RAM we have on our computer or Mac until it starts running slow from a performance standpoint.

Do you know how much RAM you have on your Mac or PC? Well, you need to know your system hardware, especially RAM, to run heavier applications. Here’s how to see how much RAM your Windows 10 PC has.

How to see the type of RAM on your Windows 10 PC

RAM stands for Random Access Memory is a type of volatile memory characterized by allowing direct access to any memory address with the same access time. Not only the amount of memory, but the generation and type of RAM chip greatly affect the performance of your PC.

Most of the computers and laptops sold these days are equipped with DDR4 SDRAM modules. Motherboards and laptops from 3-4 years ago should have at least the DDR3 RAM slot. The main thing that changes with the generation is the clock speed. Additionally, the DDR4 RAM slots support larger RAM modules.

The type of RAM is mainly important when using a Windows PC so that you can also install applications that support your hardware. Here’s how to know the type and characteristics of the RAM memory of your PC.

• Open the Command Prompt window on your Windows PC.
• Enter the following command:

wmic MemoryChip get /format:list

• Find the RAM details in the form of a list on the command prompt.

How can I see the type of RAM I have in the PC without opening it

You can try a couple of Windows commands to see RAM and RAM memory details on Windows 10.

1. To determine the producer of the memory, run the following command.
   wmic memorychip get devicelocator, manufacturer
2. To check the part number of the memory, give the following command
   wmic memorychip get devicelocator, partnumber
3. To check the capacity of the memory module, give the following command
   wmic memorychip get devicelocator, capacity
4. To check the total memory available (installed) on Windows 10 PC give the command
   systeminfo | findstr /C: "Total Physical Memory"
5. To check the full details of the memory give the command given below.
   wmic memorychip list full
6. To check the form factor of the memory, give the command
   wmic memorychip get devicelocator, formfactor
7. To check the speed of the memory , give the following command
   wmic memorychip get devicelocator, speed
8. To check the type of memory, give the following command
   wmic memorychip get devicelocator, type

How to know the type of RAM you have whether DDR3 or DDR4

RAM, as we know, is a memory, which holds information for a short time, while we are logged into the system and working. Memory efficiency will depend on the data transfer rate it has. This transfer rate is usually measured with SDR, DDR. We know more about DDR.

Double Data Rate or DDR generally falls into two categories, DDR3 and DDR4. In both DDR3 and DDR4, the data transfer rate is usually measured in gigabytes of information that the RAM processes per second.

However, the question is how to check what type of DDR a PC has. Well, there are many ways to find out. Let’s check it out.

Use the Task Manager to see if the RAM is DDR3 or DDR4?

From there you can find all the details related to other technical information. If you just want to know the type of RAM and nothing else, go to the Task Manager.

1. Open Task Manager on Windows 10. Use the shortcut Ctrl + Shift + Esc to open the window.
2. Go to the Performance tab.
3. Click on “Memory”.
4. You’ll see the speed, memory type, form factor, and hardware-reserved memory of your RAM.

How to check the speed of the RAM memory

The speed of your computer’s RAM actually depends on the motherboard. So the vendors use compatible RAM modules. This generally ranges from 1333 MHz up to 2133 MHz. To check the RAM speed on your Windows PC, follow the steps.

1. Right-click on the taskbar and click Task Manager.
2. Go to the Performance tab> Memory.
3. Find out the value compared to “Speed”.

The task manager generally provides the overall refresh rate of the memory used. In case you want to find more information about your RAM chip, you can use third party tools like CPU-Z. It will show you the real-time performance and clock speed of your hardware devices including RAM.

How to see Windows 10 RAM

When Microsoft released the initial versions of the Windows operating system, the information available to users was limited. System information about the Windows operating system has allowed users to learn about the hardware and software specifications of their computer systems. However, with the Windows 10 operating system, you may find out how much memory you have in various ways and here they are.

How to check the amount of RAM available on Windows 10 in the settings

If you’re still looking for how to check RAM on Windows 10, the Settings app has all the basic information about your PC.

1. You open Settings from Windows 10.
2. Go to General.
3. click on Information in the left pane, the window will list the available memory.

How to see how much RAM your PC has using Task Manager

The task manager app has it all listed, and here’s how to check how much RAM you have on Windows PC.

1. Open Task Manager using the keyboard shortcut Ctrl + Shift + Esc.
2. Go to the Performance tab.
3. Click on Memory and you will see the physical memory installed and the VRAM available on your system.

Use system information for Windows RAM

The Microsoft System Information tool is a built-in utility for the Windows operating system to collect information about your PC. It contains every single piece of information regarding an I / O to the CPU threads.

1. Press the button Windows + R to open the Run window.
2. Digita ” msinfo32 ”And hit enter.
3. From the opened window, find the RAM details from the group System summary .

Know the RAM from the control panel

System information on the control panel contains RAM and processor information. Here’s how to review it.

1. Open the Control Panel windows on your Windows PC.
2. Click on System and Security.
3. Go to “System” and find the available memory.

Check RAM usage on Windows 10

There are apps that eat a lot of your available physical memory and tend to slow down your system eventually. Adobe products, Google Chrome browser are some of the RAM consuming apps.

Opening these apps for a longer time means that you are consuming a lot of memory and slowing down your computer’s performance. To avoid this, you should be aware of how much memory each app is taking up and you should close the apps you are not using. Here’s how to find out RAM usage on Windows 10 using Task Manager.

1. Right-click on the taskbar and click Task Manager.
2. From the process window, click on “Memory” to sort the list by memory usage.
3. You can find out the total percentage of memory usage by each app and its background processes.
4. If you want to force it to stop, select the application and click the “End Task” button at the bottom.

You can also get more information on RAM usage from the Resource Monitor tool. Follow the steps to know how.

1. Open Task Manager> Performance.
2. Click on Memory.
3. Fare clic su Open Resource Monitor.
4. Go to the Memory tab and view detailed information on RAM usage.

Most of us are now familiar with the built-in options that let us know the available RAM and memory usage of our Windows system. Apart from these, there are several third party tools that show advanced details on memory usage. Some of these are listed below.

The performance of your PC strongly depends on the amount of RAM, the type of RAM used and the memory buffer of your RAM. Therefore, most computer users look at the RAM specs before even buying a laptop. It even mostly leads many users to upgrade their RAM to any higher available option.